ok, so uart, how do you connect it ?
On 10/02/2015 02:02, Álvaro Fernández Rojas wrote: > I tried adding support for 3.18 and I have issues booting the raspberry. > There must be something wrong with the new mmc driver, because it detects the > SD card insertions/extractiones, but doesn't read the partitions: > http://pastebin.com/GWFYrXnT > > My patches: > http://files.noltari.es/openwrt/bcm2708/brcm2708_3-18.tgz > > Regards, > Álvaro. > > El 09/02/2015 a las 18:12, Florian Fainelli escribió: >> On Feb 9, 2015 4:25 AM, "John Crispin" <blo...@openwrt.org >> <mailto:blo...@openwrt.org>> wrote: >>> >>> Hi, >>> >>> i synced our rpi port with the upstream tree on github. it boots and i >>> can see the coloured palette test pic on the hdmi, however ethernet >>> fails to come up. i attached a uart just to find out that my rpi is >>> either broken or i am connecting it wrong. >>> >>> has anyone managed to get uart working ? to my understanding i need to >>> connect pin6 to gnd and use 8 and 10 for the 2 data lines. should i see >>> output from the bootloader prior to board detecting/loading the sd card >> >> You will not get any UART output prior to the kernel boot, the GPU boot code >> does not output anything (at least not in the builds we use). >> >> Could you share the boot log to see if there is anything obvious? >> >>> >>> John >>> _______________________________________________ >>> openwrt-devel mailing list >>> openwrt-devel@lists.openwrt.org <mailto:openwrt-devel@lists.openwrt.org> >>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> >> >> >> _______________________________________________ >> openwrt-devel mailing list >> openwrt-devel@lists.openwrt.org >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel >> _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel