From: Numan Siddique
The test "ovn-nbctl: LBs - daemon" fails when it runs the command
"ovn-nbctl lb-add lb0 30.0.0.1a 192.168.10.10:80,192.168.10.20:80". ovn-nbctl
extracts the vip by calling the socket util function 'inet_parse_active()',
and this function blocks when it calls dns_resolve().
On Mon, Oct 22, 2018 at 11:21 PM Mark Michelson wrote:
> On 10/22/2018 11:49 AM, nusid...@redhat.com wrote:
> > From: Numan Siddique
> >
> > The test "ovn-nbctl: LBs - daemon" fails when it runs the command
> > "ovn-nbctl lb-add lb0 30.0.0.1a 192.168.10.10:80,192.168.10.20:80".
> ovn-nbctl
> >
On Tue, Oct 23, 2018 at 3:54 AM Mary Manohar
wrote:
> This patch series implements policy-based routing.
> Policy-based routing (PBR) provides a mechanism to configure permit/deny
> and reroute policies on the router.
> Permit/deny policies are similar to OVN ACLs, but exist on the
>
Hi,
Nice document, you are capturing the nuisances of handling VLAN very
well,
I agree that we need a chassis specific mac for the distributed routers,
when
handling E/W traffic, otherwise you end up with the situation described in
[1] making
the router port MAC flip.
That is also an
Add the possibility to specify a given mac address prefix for
dynamically generated mac address. Mac address prefix can be
specified in nbdb NB_Global table, options:mac_prefix=
This patch fix a possible issue of L2 address duplication if
multiple OVN deployments share a single broadcast domain
Hi Manojawa,
So is there any remaining entry br-flat entry in the ovsdb? Does it give any
clue to the reason – there may be a free-form ‘status’ or ‘info’ field for that
purpose.
I can understand the situation where a bridge might get incorrectly configured
but I can’t understand why it is
Hi Lorenzo,
Lorenzo Bianconi writes:
> Add the possibility to specify a given mac address prefix for
> dynamically generated mac address. Mac address prefix can be
> specified in nbdb NB_Global table, options:mac_prefix=
> This patch fix a possible issue of L2 address duplication if
> multiple
Aaron Conole writes:
> Hi Lorenzo,
>
> Lorenzo Bianconi writes:
>
>> Add the possibility to specify a given mac address prefix for
>> dynamically generated mac address. Mac address prefix can be
>> specified in nbdb NB_Global table, options:mac_prefix=
>> This patch fix a possible issue of L2
Hi,
I don't see any errors relating to the dpdk interfaces. But it is also not
clear where the user-space drivers are bound and the hugepage memory is set up.
So double check those two items.
Is the dpdk-p0 interface being attached to br-flat? Even if there are issues
with the dpdk port the
Bleep bloop. Greetings Mary Manohar, I am a robot and I have tried out your
patch.
Thanks for your contribution.
I encountered some error that I wasn't expecting. See the details below.
checkpatch:
ERROR: Author Mary Manohar needs to sign off.
WARNING: Line lacks whitespace around operator
Bleep bloop. Greetings Mary Manohar, I am a robot and I have tried out your
patch.
Thanks for your contribution.
I encountered some error that I wasn't expecting. See the details below.
checkpatch:
ERROR: Author Mary Manohar needs to sign off.
WARNING: Line is 82 characters long
Hi Billy,
Thank you for your reply.
1. Huge pages are properly set. Based on the dpdk configuration
dpdk-socket-mem="4096,4096", 8 pages were created under /dev/hugepages.
2. dpdk-p0 is not attached to br-flat1. Actually I defined the bridge as
br-flat1.
3. Yes, 'ovs-vsctl show' does not show
From: Numan Siddique
When a container port is created inside a VM, the below kernel message
is seen and IPv6 doesn't work on that interface.
[ 138.000753] IPv6: vlan4: IPv6 duplicate address detected!
When a container port sends a ethernet broadcast packet, OVN delivers the same
packet back
On 22/10/2018 11:31, Stokes, Ian wrote:
>> When a dp_packet is from a DPDK source, and it contains multi-segment
>> mbufs, the data_len is not equal to the packet size, pkt_len. Instead, the
>> data_len of each mbuf in the chain should be considered while distributing
>> the new (provided) size.
Natwest Bank Plc London
I35 Bishops gate Plaza
London, United Kingdom
(Offshore Office)
Attention:
It was resolved and agreed that your inheritance/contract payment sum of US
$15.5 million should be release and send to you on a special method of payment
tagged Cash Payment/Home Delivery in
Natwest Bank Plc London
I35 Bishops gate Plaza
London, United Kingdom
(Offshore Office)
Attention:
It was resolved and agreed that your inheritance/contract payment sum of US
$15.5 million should be release and send to you on a special method of payment
tagged Cash Payment/Home Delivery in
Hi Customer d...@openvswitch.org
___
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
On Thu, Oct 18, 2018 at 02:10:47PM -0700, Yifeng Sun wrote:
> Counters in ops->custom_stats may already be valid at this error point.
> This patch frees the leaked memory.
>
> Reported-at: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10322
> Signed-off-by: Yifeng Sun
Thanks, applied
Hi Customer d...@openvswitch.org
___
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
On Thu, Oct 18, 2018 at 02:10:49PM -0700, Yifeng Sun wrote:
> For function odp_nsh_hdr_from_attr, paramemter `attr` may not contain
> all necessary OVS_NSH_KEY_ATTR_ to fully initialize data of nsh_hdr.
> On return, nsh_hdr can contain uninitialized values in its fields.
>
> This patch zeroes out
Reported-by: lidejun
Signed-off-by: Ben Pfaff
---
utilities/ovs-ofctl.8.in | 12 +++-
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index aefea16ee34d..659406de57b4 100644
--- a/utilities/ovs-ofctl.8.in
+++
Hi Billy,
There are no br-flat1 entries in ovsdb.
As suggested I increased the log level to debug and then tried the same
scenario again. Though the result was same (br-flat1 getting deleted), I
observed the below 2 issues (i assume).
Issue-1 :-
1. Everything is up and running. That is all the
>
> Remove note regarding zero-copy compatibility with QEMU >= 2.7.
>
> When zero-copy was introduced to OVS it was incompatible with QEMU >=
> 2.7. This issue has since been fixed in DPDK with commit
> 803aeecef123 ("vhost: fix dequeue zero copy with virtio1") and
> backported to DPDK LTS
On Sat, Oct 20, 2018 at 06:10:52AM +, lidejun wrote:
> Has anybody found this issue: when using userspace ovs + dpdk with ipv6 vxlan
> tunnel, if too many ipv6 route changes in a short time, ovs main thread will
> stuck at recvmsg?
> Call chain is:
> route_table_run ---> nln_run --->
On Tue, Oct 23, 2018 at 11:48:58AM +0530, nusid...@redhat.com wrote:
> From: Numan Siddique
>
> The test "ovn-nbctl: LBs - daemon" fails when it runs the command
> "ovn-nbctl lb-add lb0 30.0.0.1a 192.168.10.10:80,192.168.10.20:80". ovn-nbctl
> extracts the vip by calling the socket util function
On Tue, Oct 23, 2018 at 09:49:15AM -0700, Ben Pfaff wrote:
> On Tue, Oct 23, 2018 at 11:48:58AM +0530, nusid...@redhat.com wrote:
> > From: Numan Siddique
> >
> > The test "ovn-nbctl: LBs - daemon" fails when it runs the command
> > "ovn-nbctl lb-add lb0 30.0.0.1a
On Tue, Oct 23, 2018 at 10:20 PM Ben Pfaff wrote:
> On Tue, Oct 23, 2018 at 09:49:15AM -0700, Ben Pfaff wrote:
> > On Tue, Oct 23, 2018 at 11:48:58AM +0530, nusid...@redhat.com wrote:
> > > From: Numan Siddique
> > >
> > > The test "ovn-nbctl: LBs - daemon" fails when it runs the command
> > >
Backported OFPT14_REQUESTFORWARD to OF1.0-1.3 as a Nicira
extension. Will only forward GROUP_MOD messages in OF
1.0 through 1.2, since METER_MOD was only added in 1.3.
VMware-BZ: 2136594
Signed-off-by: Zak Whittington
---
include/openvswitch/ofp-monitor.h | 1 +
include/openvswitch/ofp-msgs.h
On Tue, Oct 23, 2018 at 11:24:39PM +0530, Numan Siddique wrote:
> On Tue, Oct 23, 2018 at 10:20 PM Ben Pfaff wrote:
>
> > On Tue, Oct 23, 2018 at 09:49:15AM -0700, Ben Pfaff wrote:
> > > On Tue, Oct 23, 2018 at 11:48:58AM +0530, nusid...@redhat.com wrote:
> > > > From: Numan Siddique
> > > >
>
On Tue, Oct 23, 2018 at 11:23:32AM -0700, Zak Whittington wrote:
> Backported OFPT14_REQUESTFORWARD to OF1.0-1.3 as a Nicira
> extension. Will only forward GROUP_MOD messages in OF
> 1.0 through 1.2, since METER_MOD was only added in 1.3.
>
> VMware-BZ: 2136594
> Signed-off-by: Zak Whittington
On Thu, Oct 18, 2018 at 02:10:48PM -0700, Yifeng Sun wrote:
> When parse_odp_key_mask_attr runs into ufid, it returns length of ufid
> without further parsing. This causes problem to set action in function
> parse_odp_action where nested nlattrs are expected from ofpbuf after.
>
> Since in all
On Thu, Oct 18, 2018 at 04:47:05PM +0530, nusid...@redhat.com wrote:
> From: Numan Siddique
>
> We see the below trace when a port is added to a bridge and the configured
> controller is down
>
> 0x7fb002f8b207 in raise () from /lib64/libc.so.6
> 0x7fb002f8c8f8 in abort () from
On Mon, Oct 22, 2018 at 10:24:03PM +, Mary Manohar wrote:
> This patch series implements policy-based routing.
> Policy-based routing (PBR) provides a mechanism to configure permit/deny and
> reroute policies on the router.
> Permit/deny policies are similar to OVN ACLs, but exist on the
On Mon, Oct 15, 2018 at 11:23:33AM +0200, bshas...@sect.tu-berlin.de wrote:
> From: Bhargava Shastry
>
> This patch adds a new target called ofctl_parse_target to
> ossfuzz. The main idea is to begin to fuzz APIs from the ofctl utility
> program. At a later point, these may be added. For the
> On Aug 30, 2018, at 1:00 PM, Ben Pfaff wrote:
>
> OpenFlow table feature replies contain a per-table bitmap that indicates
> which tables a flow can point to in goto_table actions. OpenFlow requires
> that a table only be able to go to higher-numbered tables. This means that
> a switch
> On Oct 23, 2018, at 9:26 AM, Ben Pfaff wrote:
>
> Reported-by: lidejun
> Signed-off-by: Ben Pfaff
Acked-by: Justin Pettit
--Justin
___
dev mailing list
d...@openvswitch.org
https://mail.openvswitch.org/mailman/listinfo/ovs-dev
> On Aug 30, 2018, at 1:00 PM, Ben Pfaff wrote:
>
> Sometimes the 'errors' list is passed as null, and in that case it should
> not be used.
>
> Found by inspection.
>
> Signed-off-by: Ben Pfaff
Acked-by: Justin Pettit
--Justin
___
dev
> On Aug 30, 2018, at 1:00 PM, Ben Pfaff wrote:
>
> Before this patch, most dump-table-stats outputs would contain about
> 250 lines of the form:
>
> table #: ditto
>
> With this patch, they have one line like this:
>
> tables 2...254: ditto
>
> which is much easier to read.
>
>
> On Aug 30, 2018, at 1:00 PM, Ben Pfaff wrote:
>
> Table features should indicate the table number as well as the table
> name. Before this, the first line for each table looked like this:
> table myname ("myname"):
> but it's more useful if it's:
> table 123 ("myname"):
>
>
Backported OFPT14_REQUESTFORWARD to OF1.0-1.3 as a Nicira
extension.
VMware-BZ: 2136594
Signed-off-by: Zak Whittington
---
include/openvswitch/ofp-monitor.h | 1 +
include/openvswitch/ofp-msgs.h| 5 +-
lib/ofp-monitor.c | 11 +++--
ofproto/connmgr.c | 6
40 matches
Mail list logo