Dr. Trigon
owfs-debug-log
Description:
--
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
Am 06.07.2016 um 07:45 schrieb Dr. Trigon:
>
> Thanks a lot for the patch. To summarize; its still the same
> situation, do not see any dots/pixels.
>
I'm out of ideas.
> So I am wondering; can or shall I play with contrast values? Should I
> measure the voltages at the lcds pins? I could e.g.
Hello Jan
Thanks a lot for the patch. To summarize; its still the same situation, do not
see any dots/pixels.
So I am wondering; can or shall I play with contrast values? Should I measure
the voltages at the lcds pins? I could e.g. compare the patch applied against
the voltage measured?
Here
Am 05.07.2016 um 07:41 schrieb Dr. Trigon:
> The
> datasheet sais "software controlled contrast" not more. The code
> example [1] they provide mentions a ST7036 display controller [2].
> May be that is related as I never saw any dots of the matrices.
>
Please rollback the previous patch, then appl
Am 05.07.2016 um 07:41 schrieb Dr. Trigon:
>>> $ module/owserver/src/c/owserver --debug
>>> --link=192.168.11.5:10001
>>>
>> Yes.
>
> Disconnected all devices and connected the LCD instead, then:
>
> ~/owfs-code$ module/owserver/src/c/owserver --debug
> --link=192.168.11.5:10001 in another windo
>> $ module/owserver/src/c/owserver --debug --link=192.168.11.5:10001
>>
>Yes.
Disconnected all devices and connected the LCD instead, then:
~/owfs-code$ module/owserver/src/c/owserver --debug --link=192.168.11.5:10001
in another window:
~/owfs-code$ module/owshell/src/c/owwrite /29.2F721400
# Sample configuration file for the OWFS suite for Debian GNU/Linux.
#
#
# This is the main OWFS configuration file. You should read the
# owfs.conf(5) manual page in order to understand the options listed
# here.
SOURCES
#
# With this setup, any c
Am 03.07.2016 um 13:48 schrieb Dr. Trigon:
>
> I tried again without the -u param but it did not make any change.
> Still lcd background goes on after clear command. May be I need to
> test using the other master.
>
Please test it all with a minimal setup. A single host adaptor. A single
cable. A
Hello Jan
I should have had included more info. So I am running owfs on a raspi. It
accesses ethernet 1wire masters through lan (linkhub, owserver enet).
1. login to raspi, run killall to shut owfs down
2. start owfs as described here on another machine for testing (as I can access
the master f
Am 02.07.2016 um 15:08 schrieb Dr. Trigon:
>
> $ git clone git://git.code.sf.net/p/owfs/code owfs-code
> $ cd owfs-code/
> ~/owfs-code$ ./bootstrap
> ~/owfs-code$ ./configure
> (get patch from
> https://sourceforge.net/p/owfs/mailman/owfs-developers/?viewmonth=201606&viewday=28)
> ~/owfs-code$
>>> Any news on this? Patch for testing ready? ;)
>>>
>>A quick&dirty patch is appended. I have tested it myself with a DS2408
>>plus HD44780 LCD connected as described in the eservice documentation.
>>
>>Don't forget to install automake and pkgconfig. Use the current git
>>archive clone as your ba
Am 27.06.2016 um 18:06 schrieb Dr. Trigon:
>
> Any news on this? Patch for testing ready? ;)
>
A quick&dirty patch is appended. I have tested it myself with a DS2408
plus HD44780 LCD connected as described in the eservice documentation.
Don't forget to install automake and pkgconfig. Use the curre
Am 21.06.2016 um 08:04 schrieb Johan Ström:
> On 20/06/16 16:12, Jan Kandziora wrote:
>
>> Am 20.06.2016 um 07:39 schrieb Dr. Trigon:
>>> Hello
>>>
>>> I bought an eservice LCD [1] but it does not work. Can somebody give me
>>> some advice what to do?
>>>
>>> [1] https://www.eservice-online.de/sh
Sorry the response was regarding: "Communication to DS9097U not working"
mixed the emails up sorry
Gesendet: Montag, 27. Juni 2016 um 18:40 Uhr
Von: samuix
An: owfs-developers@lists.sourceforge.net
Betreff: Re: [Owfs-developers] How to use eservice LCD
Hi,
with t
154) Not found
DEBUG: ow_regex.c:(154) Not found
DEBUG: ow_regex.c:(154) Not found
DEBUG: ow_parsename.c:(63) /uncached/alarm
DEBUG: ow_dir.c:(199) ret=0
DEBUG: ow_parsename.c:(63) /uncached
DEBUG: data.c:(193) DataHandler: FS_ParsedName_destroy done
DEBUG: data.c:(207) DataHandler: cm.re
>Message: 5
>Date: Tue, 21 Jun 2016 08:04:02 +0200
>From: Johan Str?m
>Subject: Re: [Owfs-developers] How to use eservice LCD
>To: "OWFS (One-wire file system) discussion and help"
>
>Message-ID: <5da32148-2223-33ab-8ba9-5bdd7e639...@stromnet.se&g
>Message: 5
>Date: Tue, 21 Jun 2016 08:04:02 +0200
>From: Johan Str?m
>Subject: Re: [Owfs-developers] How to use eservice LCD
>To: "OWFS (One-wire file system) discussion and help"
>
>Message-ID: <5da32148-2223-33ab-8ba9-5bdd7e639...@stromnet.se&g
On 20/06/16 16:12, Jan Kandziora wrote:
> Am 20.06.2016 um 07:39 schrieb Dr. Trigon:
>> Hello
>>
>> I bought an eservice LCD [1] but it does not work. Can somebody give me some
>> advice what to do?
>>
>> [1] https://www.eservice-online.de/shop/e-service-1-wire-bus/display-lcd/
>> Dr. Trigon
>>
>
Am 20.06.2016 um 07:39 schrieb Dr. Trigon:
> Hello
>
> I bought an eservice LCD [1] but it does not work. Can somebody give me some
> advice what to do?
>
> [1] https://www.eservice-online.de/shop/e-service-1-wire-bus/display-lcd/
> Dr. Trigon
>
That display isn't supported by the current versi
Hello
I bought an eservice LCD [1] but it does not work. Can somebody give me some
advice what to do?
[1] https://www.eservice-online.de/shop/e-service-1-wire-bus/display-lcd/
Dr. Trigon--
What NetFlow Analyzer can do fo
20 matches
Mail list logo
