and install db again or
something like that?
Best regards,
--
From: Durand fabrice fdur...@inverse.ca
Sent: 5/26/2015 8:32 AM
To: packetfence-users@lists.sourceforge.net
Subject: Re: [PacketFence-users] Apply to Vlan
Hello Minh,
it miss a procedure in your
mailto:packetfence-users@lists.sourceforge.net
Subject: Re: [PacketFence-users] Apply to Vlan
Hello Minh,
it miss a procedure in your database.
Let's do:
mysqldump -uroot -p pf --no-data --routines
and compare with db/pf-schema.sql
Regards
Fabrice
Le 2015-05-25 04:57, Minh Trung
/2015 8:32 AM
To: packetfence-users@lists.sourceforge.net
packetfence-users@lists.sourceforge.net
Subject: Re: [PacketFence-users] Apply to Vlan
Hello Minh,
it miss a procedure in your database.
Let's do:
mysqldump -uroot -p pf --no-data --routines
and compare with db/pf-schema.sql
Regards
Hello,
I am still not able to resolved this issue:
Mon May 25 15:33:20 2015 : Error: [sql] Couldn't update SQL accounting
STOP record - PROCEDURE pf.acct_stop does not exist
Mon May 25 15:33:20 2015 : Error: rlm_sql_mysql: Cannot store result
Mon May 25 15:33:20 2015 : Error: rlm_sql_mysql:
Hello Minh,
it miss a procedure in your database.
Let's do:
mysqldump -uroot -p pf --no-data --routines
and compare with db/pf-schema.sql
Regards
Fabrice
Le 2015-05-25 04:57, Minh Trung a écrit :
Hello,
I am still not able to resolved this issue:
Mon May 25 15:33:20 2015 : Error:
Hello Juan,
I showed and it empty.
*mysql use pf;Database changedmysql show procedure status;Empty set (0.00
sec)*
Now, i using PF v5.0.5 and i saw many procedures just after the radius
tables at docs in db's PF directory.
Would you please point me the exact command to insert them?
Thank
Hi Minh,
I don´t have the excatly procedure write it, however is very simple.
1. Open up in a text editor, nedit is my preference, the schema of the
database that match your version of pf.
2. At the same time connect to pf database, mysql -u pf -p pf.
3. Search in the schema for the keyword
Hello Fabrice,
I was successful in configured the vmware machine in tag the vlan as above
we discussed (it take long time to figure out [?]) and i also see the
portal on device which is plugged in the port testing.
But on radius log still show the error:
*Tue Apr 28 16:53:57 2015 :
Hello Fabrice,
You are right, my VMware connected 4500 via gi7/6, here is the spaning-tree
command:
*VLAN0210 Spanning tree enabled protocol ieee Root IDPriority
32978 Address 5475.d0c3.e100 This bridge is the
root
Hello Fabrice,
I changed reg and iso interface back to 10.126.210.1, 10.126.220.1 but
still no luck.
As you comment could we call PF as a switch L2? Then after plug a device to
4500 i am not able ping to 10.126.210.1 even from 4500 can not ping
10.126.210.1 also.
Do i misconfiguration on vmware?
Hello Minh,
based on what i can see and suppose packetfence has been plugged on
Gi7/6 (vmware).
So check :
'show spanning-tree' if vlan 210 and 220 are forwarded to gi7/6
Where packetfence is connected on vmware ? is it connected to a trunk
port where the vlan 220 and 230 are allowed and
Hello Fabrice,
I already check trunk port but still problem as previously posted.
My PF as below:
PC ---+ -- Switch_L2(2960- Cisco) ---trunk-- Switch_L3(4500) ---trunk---
PF(VMware- ESX)
Here is the config interface that L2 connected on Core switch:
i
*nterface GigabitEthernet2/4
Hi Minh,
Keep in mind that reg and isol vlan are layer 2 networks, so you don't
have to assign an ip address for these 2 vlan on the cisco config
(packetfence is the only one who manage what happen on these 2 networks).
So the the ip address of the reg interface is 10.126.210.1 (ifconfig)
-
From: Durand fabrice fdur...@inverse.ca fdur...@inverse.ca
Sent: 3/26/2015 10:37 PM
To: packetfence-users@lists.sourceforge.net
packetfence-users@lists.sourceforge.net
packetfence-users@lists.sourceforge.net
packetfence-users@lists.sourceforge.net
Subject: Re: [PacketFence-users] Apply
...@inverse.ca
Sent: 3/26/2015 10:37 PM
To: packetfence-users@lists.sourceforge.net
packetfence-users@lists.sourceforge.net
Subject: Re: [PacketFence-users] Apply to Vlan
Hi Minh,
If you already created a reg and isol interfaces then the dhcp will be enabled
by default.
Just plug a device
:37 PM
To: packetfence-users@lists.sourceforge.net
packetfence-users@lists.sourceforge.net
Subject: Re: [PacketFence-users] Apply to Vlan
Hi Minh,
If you already created a reg and isol interfaces then the dhcp will be enabled
by default.
Just plug a device on the vlan 210 to see if you have
Hello Fabrice,
It seem be working fine after used (mysql -u root -p pf -v
/usr/local/pf/db/upgrade-4.6.0-4.7.0.sql). But i think i installed PF from
refresh so it included packet.
So, what's next steps i have to do to supply DHCP for users which are Vlan
210, and 220?
How to scan clients by
Hello Minh,
You have to update the mysql schema.
Take a look at the upgrade file.
Regards
Fabrice
Le 20 mars 2015 05:21:00 GMT-04:00, Minh Trung mvtrun...@gmail.com a écrit :
Hello Fabrice,
I did as you recommended but error appeared while i don't know how to
resolved.
These are some errors
Hello Fabrice,
I did as you recommended but error appeared while i don't know how to
resolved.
These are some errors related that i look on radius.log and packetfence.log
*#packetfence.log:*
*Mar 20 15:53:45 httpd.aaa(6337) INFO: [2c:27:d7:c3:c0:08] handling radius
autz request: from
Hello Fabrice,
Thank you for your quick responded,
My LAN Cisco switches 2960 are almost using Version 12.2(44)SE6, does this
version enough condition to MAB configured?
And Core switches are 4500 model, Version 12.2(50)SG3.
I did as you recommended but after configuration radius on switch then
Hello Minh,
your packetfence config looks ok, now next step is to configure your
cisco switch, so let's check the documentation:
https://github.com/inverse-inc/packetfence/blob/devel/docs/PacketFence_Network_Devices_Configuration_Guide.asciidoc#cisco
If your cisco switch support MAB then use
Hello experts,
I am newbie.
My network as attached file and i suggested i should use PF as Vlan
enforcement.
My infrastructure already has:
Vlan122: Servers (including PF server, pf is vmware)
Vlan123: Office Users (PCs, Desktops, IP Phone, Printer)
Vlan124: Telephone
Vlan:125 Firewall
22 matches
Mail list logo
