Hi Jimmy and Fabrice,
I would like to report the same experience. I have a realm
(OPTIONS-AD-REALM) and it is associated with the AD domain (optionsad), i.e.
[OPTIONS-AD-REALM]
domain=optionsad
options=strip
I had similar problems with winbind, same errors in the output of RADIUS
Hello Ian,
there is a configuration parameter that can be change to raise the time
between the deauth order and the CoA request.
It's Config{'fencing'}{'wait_for_redirect'} , so in pf.conf:
[fencing]
#
# fencing.wait_for_redirect
#
# How many seconds should the WebAPI sleep before actually
Hello Sergio,
Le 2018-03-06 à 11:54, Sergio Rizzi via PacketFence-users a écrit :
Hi,
i'm using PF 7.3.0 with active cluster and i have some trouble using
CoA deauth.
These are the code changes to make it works (sorry for a non
patch-like code):
lib/pf/accounting.pm: on clusters,
Hello Ebrar,
This should work:
[192.168.56.100]
description=IOUvL2
type=Cisco::Catalyst_2960
radiusSecret=useStrongerSecret
deauthMethod=RADIUS
Regards
Fabrice
Le 2018-03-06 à 08:49, ebrar via PacketFence-users a écrit :
Hi All,
I have set up PF on a virtual machine whose OS is Centos
Considering that Meru as a company is 404 and the brain-drain following
the Fortinet acquisition essentially put the whole product line into
life support mode in terms of customer support, I would not hold my
breath waiting for someone to fix any Meru problems in PF.
We are running PF 5.x with
Well,
We easily narrowed this down to a timing issue related to the
Access-Accept(2) messages and how long an authorization is considered valid
by hostapd.
In short, we need to make sure that the CoA from portal activation is NOT
sent to the AP within 30 seconds of the initial connection to the
Hi,
i'm using PF 7.3.0 with active cluster and i have some trouble using
CoA deauth.
These are the code changes to make it works (sorry for a non patch-like
code):
lib/pf/accounting.pm: on clusters, cache seems not to work
[...]
+use pf::cluster;
[...]
sub
seeing as packetfence won't connect to the meru controller either via telnet or
ssh to de-associate
macs ?
(see previous posts on this issue Meru 3200)
--
Check out the vibrant tech community on one of the world's
Eugene,
I think a good old fashioned network diagram could be of help here. I am
not sure which linux flavour your running, but I can see one problem that
might be confusing your forwarding/arp/iptables.
You have two IP addresses on the same subnet configured both on the raw
device (eth0) and a
I've been trying to figure out this problem for days, whenever I try to
authenticate a user on Windows, I get the following error while the login is
correct:
[cid:image001.png@01D3B54D.1667FFA0]
'wbinfo -p' fails aswell:
[cid:image002.png@01D3B54D.1667FFA0]
Winbind service is running:
Hi All,
I have set up PF on a virtual machine whose OS is Centos and i have set
up a switch on GNS3 by using the image below :
i86bi-linux-l2-adventerprisek9-15.1a
This SW lets me do all the configurations mentioned on PacketFence
Out-of-Band Deployment Quick Guide. You can see the related
We have packetfence 7.4 instances out-of-band running on Debian 8, and use
the captive portal with hostapd for WiFi client access.
Our clients register using an email source for activation.
Our configuration uses all captive_portal defaults except for the network
detection IP, shown below.
Hubert,
I would assume you mean upgraded from 7.3.0 to 7.4.0;
I think by default, connection profiles support whatever locale your
browser requests. Maybe confirm your local setup using mybrowserinfo.com
and make sure you are requesting the language you want.
Using locale= will let your
13 matches
Mail list logo
