Re: [HACKERS] msvc failure in largeobject regression test
Tom Lane wrote: Andrew Dunstan <[EMAIL PROTECTED]> writes: Magnus Hagander wrote: I wonder if this is a line-end issue? Assuming you are working from CVS, does your client turn \n into \r\n ? I have just run into this today while trying to get buildfarm working for MSVC. After some consideration I think an alternative result file is the best solution. I have looked at switches for cnsnt, but they are likely to be fragile at best. Are you proposing an alternate result file that has a different linefeed style? I would really really rather that we not go there, because it will be impossibly fragile to maintain. Or are you willing to accept that the Windows builds will break every time someone changes that regression test, until someone else with a Windows machine fixes the result file? I would find it preferable to make pg_regress compensate for this issue somehow ... No, the alternate results file does not use different line feeds, and is as you would wish not sensitive to line-end style. I was careful (I hope careful enough) to make sure that the file I checked in didn't have a single CR in it. It just reflects the results obtained when tenk.data file is checked out with CRLF line endings and then used for LO input. The alternative as you say is that we make pg_regress perform some sort of dos2unix on the data file. I note that tenk.data hasn't changed in 4 years. cheers andrew ---(end of broadcast)--- TIP 3: Have you checked our extensive FAQ? http://www.postgresql.org/docs/faq
Re: [HACKERS] msvc failure in largeobject regression test
Andrew Dunstan <[EMAIL PROTECTED]> writes: > Magnus Hagander wrote: > I wonder if this is a line-end issue? Assuming you are working from CVS, > does your client turn \n into \r\n ? > I have just run into this today while trying to get buildfarm working > for MSVC. After some consideration I think an alternative result file is > the best solution. I have looked at switches for cnsnt, but they are > likely to be fragile at best. Are you proposing an alternate result file that has a different linefeed style? I would really really rather that we not go there, because it will be impossibly fragile to maintain. Or are you willing to accept that the Windows builds will break every time someone changes that regression test, until someone else with a Windows machine fixes the result file? I would find it preferable to make pg_regress compensate for this issue somehow ... regards, tom lane ---(end of broadcast)--- TIP 7: You can help support the PostgreSQL project by donating at http://www.postgresql.org/about/donate
Re: [HACKERS] msvc failure in largeobject regression test
Magnus Hagander wrote: On Tue, Jan 23, 2007 at 11:39:23AM -0800, Jeremy Drake wrote: On Tue, 23 Jan 2007, Magnus Hagander wrote: On Tue, Jan 23, 2007 at 09:31:40AM -0500, Andrew Dunstan wrote: Magnus Hagander wrote: Hi! I get failures for the largeobject regression tests on my vc++ build. I don't think this has ever worked, given that those tests are fairly new. Any quick ideas on what's wrong before I dig deeper? [snip] I wonder if this is a line-end issue? Assuming you are working from CVS, does your client turn \n into \r\n ? I see that other windows boxes are happily passing this test on the buildfarm, and of course the mingw cvs doesn't adjust line endings. Bingo! That's it. I copeid the file in binary mode from a linux box and now it passes. I thought about that when I wrote it, and thus tried it under mingw and cygwin without issue ;) I don't think the regression tests were in a position of running on the msvc build at the time... My thought for what to do if this did run into a problem would be an alternate output file that is also acceptable (I don't know what they're called but other tests have them IIRC). Either that, or we require a checkout using Unix style linefeeds. I've confirmed that removing the file and checking it back out with "cvs --lf update tenk.data" works - tests pass fine. Yet another option might be to flag that file as binary in cvs, in which case I think cvsnt shouldn't go mess with it. I have just run into this today while trying to get buildfarm working for MSVC. After some consideration I think an alternative result file is the best solution. I have looked at switches for cnsnt, but they are likely to be fragile at best. cheers andrew ---(end of broadcast)--- TIP 6: explain analyze is your friend
Re: [HACKERS] msvc failure in largeobject regression test
No. I think one option is "fix it in the cvs client". There are options there to do it if you use cvsnt. FWIW, if I built off the snapshot tarballs things work, since they have unix linefeeds. //Magnus On Tue, Feb 20, 2007 at 05:11:41PM -0500, Bruce Momjian wrote: > > Was this problem addressed? > > --- > > Magnus Hagander wrote: > > On Tue, Jan 23, 2007 at 11:39:23AM -0800, Jeremy Drake wrote: > > > On Tue, 23 Jan 2007, Magnus Hagander wrote: > > > > > > > On Tue, Jan 23, 2007 at 09:31:40AM -0500, Andrew Dunstan wrote: > > > > > Magnus Hagander wrote: > > > > > >Hi! > > > > > > > > > > > >I get failures for the largeobject regression tests on my vc++ > > > > > >build. I > > > > > >don't think this has ever worked, given that those tests are fairly > > > > > >new. > > > > > >Any quick ideas on what's wrong before I dig deeper? > > > > > > > > > > > > > > > > > [snip] > > > > > > > > > > I wonder if this is a line-end issue? Assuming you are working from > > > > > CVS, > > > > > does your client turn \n into \r\n ? I see that other windows boxes > > > > > are > > > > > happily passing this test on the buildfarm, and of course the mingw > > > > > cvs > > > > > doesn't adjust line endings. > > > > > > > > Bingo! > > > > > > > > That's it. I copeid the file in binary mode from a linux box and now it > > > > passes. > > > > > > I thought about that when I wrote it, and thus tried it under mingw and > > > cygwin without issue ;) I don't think the regression tests were in a > > > position of running on the msvc build at the time... My thought for what > > > to do if this did run into a problem would be an alternate output file > > > that is also acceptable (I don't know what they're called but other tests > > > have them IIRC). > > > > Either that, or we require a checkout using Unix style linefeeds. I've > > confirmed that removing the file and checking it back out with "cvs --lf > > update tenk.data" works - tests pass fine. > > > > Yet another option might be to flag that file as binary in cvs, in which > > case I think cvsnt shouldn't go mess with it. > > > > //Magnus > > > > ---(end of broadcast)--- > > TIP 1: if posting/reading through Usenet, please send an appropriate > >subscribe-nomail command to [EMAIL PROTECTED] so that your > >message can get through to the mailing list cleanly > > -- > Bruce Momjian <[EMAIL PROTECTED]> http://momjian.us > EnterpriseDB http://www.enterprisedb.com > > + If your life is a hard drive, Christ can be your backup. + ---(end of broadcast)--- TIP 9: In versions below 8.0, the planner will ignore your desire to choose an index scan if your joining column's datatypes do not match
Re: [HACKERS] msvc failure in largeobject regression test
Was this problem addressed? --- Magnus Hagander wrote: > On Tue, Jan 23, 2007 at 11:39:23AM -0800, Jeremy Drake wrote: > > On Tue, 23 Jan 2007, Magnus Hagander wrote: > > > > > On Tue, Jan 23, 2007 at 09:31:40AM -0500, Andrew Dunstan wrote: > > > > Magnus Hagander wrote: > > > > >Hi! > > > > > > > > > >I get failures for the largeobject regression tests on my vc++ build. I > > > > >don't think this has ever worked, given that those tests are fairly > > > > >new. > > > > >Any quick ideas on what's wrong before I dig deeper? > > > > > > > > > > > > > > [snip] > > > > > > > > I wonder if this is a line-end issue? Assuming you are working from CVS, > > > > does your client turn \n into \r\n ? I see that other windows boxes are > > > > happily passing this test on the buildfarm, and of course the mingw cvs > > > > doesn't adjust line endings. > > > > > > Bingo! > > > > > > That's it. I copeid the file in binary mode from a linux box and now it > > > passes. > > > > I thought about that when I wrote it, and thus tried it under mingw and > > cygwin without issue ;) I don't think the regression tests were in a > > position of running on the msvc build at the time... My thought for what > > to do if this did run into a problem would be an alternate output file > > that is also acceptable (I don't know what they're called but other tests > > have them IIRC). > > Either that, or we require a checkout using Unix style linefeeds. I've > confirmed that removing the file and checking it back out with "cvs --lf > update tenk.data" works - tests pass fine. > > Yet another option might be to flag that file as binary in cvs, in which > case I think cvsnt shouldn't go mess with it. > > //Magnus > > ---(end of broadcast)--- > TIP 1: if posting/reading through Usenet, please send an appropriate >subscribe-nomail command to [EMAIL PROTECTED] so that your >message can get through to the mailing list cleanly -- Bruce Momjian <[EMAIL PROTECTED]> http://momjian.us EnterpriseDB http://www.enterprisedb.com + If your life is a hard drive, Christ can be your backup. + ---(end of broadcast)--- TIP 1: if posting/reading through Usenet, please send an appropriate subscribe-nomail command to [EMAIL PROTECTED] so that your message can get through to the mailing list cleanly
Re: [HACKERS] msvc failure in largeobject regression test
On Tue, Jan 23, 2007 at 11:39:23AM -0800, Jeremy Drake wrote: > On Tue, 23 Jan 2007, Magnus Hagander wrote: > > > On Tue, Jan 23, 2007 at 09:31:40AM -0500, Andrew Dunstan wrote: > > > Magnus Hagander wrote: > > > >Hi! > > > > > > > >I get failures for the largeobject regression tests on my vc++ build. I > > > >don't think this has ever worked, given that those tests are fairly new. > > > >Any quick ideas on what's wrong before I dig deeper? > > > > > > > > > > > [snip] > > > > > > I wonder if this is a line-end issue? Assuming you are working from CVS, > > > does your client turn \n into \r\n ? I see that other windows boxes are > > > happily passing this test on the buildfarm, and of course the mingw cvs > > > doesn't adjust line endings. > > > > Bingo! > > > > That's it. I copeid the file in binary mode from a linux box and now it > > passes. > > I thought about that when I wrote it, and thus tried it under mingw and > cygwin without issue ;) I don't think the regression tests were in a > position of running on the msvc build at the time... My thought for what > to do if this did run into a problem would be an alternate output file > that is also acceptable (I don't know what they're called but other tests > have them IIRC). Either that, or we require a checkout using Unix style linefeeds. I've confirmed that removing the file and checking it back out with "cvs --lf update tenk.data" works - tests pass fine. Yet another option might be to flag that file as binary in cvs, in which case I think cvsnt shouldn't go mess with it. //Magnus ---(end of broadcast)--- TIP 1: if posting/reading through Usenet, please send an appropriate subscribe-nomail command to [EMAIL PROTECTED] so that your message can get through to the mailing list cleanly
Re: [HACKERS] msvc failure in largeobject regression test
On Tue, 23 Jan 2007, Magnus Hagander wrote: > On Tue, Jan 23, 2007 at 09:31:40AM -0500, Andrew Dunstan wrote: > > Magnus Hagander wrote: > > >Hi! > > > > > >I get failures for the largeobject regression tests on my vc++ build. I > > >don't think this has ever worked, given that those tests are fairly new. > > >Any quick ideas on what's wrong before I dig deeper? > > > > > > > > [snip] > > > > I wonder if this is a line-end issue? Assuming you are working from CVS, > > does your client turn \n into \r\n ? I see that other windows boxes are > > happily passing this test on the buildfarm, and of course the mingw cvs > > doesn't adjust line endings. > > Bingo! > > That's it. I copeid the file in binary mode from a linux box and now it > passes. I thought about that when I wrote it, and thus tried it under mingw and cygwin without issue ;) I don't think the regression tests were in a position of running on the msvc build at the time... My thought for what to do if this did run into a problem would be an alternate output file that is also acceptable (I don't know what they're called but other tests have them IIRC). -- Fifth Law of Procrastination: Procrastination avoids boredom; one never has the feeling that there is nothing important to do. ---(end of broadcast)--- TIP 9: In versions below 8.0, the planner will ignore your desire to choose an index scan if your joining column's datatypes do not match
Re: [HACKERS] msvc failure in largeobject regression test
On Tue, Jan 23, 2007 at 09:31:40AM -0500, Andrew Dunstan wrote: > Magnus Hagander wrote: > >Hi! > > > >I get failures for the largeobject regression tests on my vc++ build. I > >don't think this has ever worked, given that those tests are fairly new. > >Any quick ideas on what's wrong before I dig deeper? > > > > > [snip] > > I wonder if this is a line-end issue? Assuming you are working from CVS, > does your client turn \n into \r\n ? I see that other windows boxes are > happily passing this test on the buildfarm, and of course the mingw cvs > doesn't adjust line endings. Bingo! That's it. I copeid the file in binary mode from a linux box and now it passes. //Magnus ---(end of broadcast)--- TIP 9: In versions below 8.0, the planner will ignore your desire to choose an index scan if your joining column's datatypes do not match
Re: [HACKERS] msvc failure in largeobject regression test
Magnus Hagander wrote: Hi! I get failures for the largeobject regression tests on my vc++ build. I don't think this has ever worked, given that those tests are fairly new. Any quick ideas on what's wrong before I dig deeper? [snip] I wonder if this is a line-end issue? Assuming you are working from CVS, does your client turn \n into \r\n ? I see that other windows boxes are happily passing this test on the buildfarm, and of course the mingw cvs doesn't adjust line endings. cheers andrew ---(end of broadcast)--- TIP 1: if posting/reading through Usenet, please send an appropriate subscribe-nomail command to [EMAIL PROTECTED] so that your message can get through to the mailing list cleanly
Re: [HACKERS] msvc failure in largeobject regression test
Magnus Hagander wrote: Hi! I get failures for the largeobject regression tests on my vc++ build. I don't think this has ever worked, given that those tests are fairly new. Any quick ideas on what's wrong before I dig deeper? FWIW: emu managed to trigger a largeobject related failure too (though it looks different then yours): http://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=emu&dt=2007-01-22%2023:35:03 Stefan ---(end of broadcast)--- TIP 2: Don't 'kill -9' the postmaster