Are you sure?
$ php -a
php > for ($i = 0; $i < 10; $i++) { echo $i . ' '; }
0 1 2 3 4 5 6 7 8 9
David
On 11-03-22 06:22 PM, Jim Giner wrote:
Kinda new to this, but I've been puttering/writing for about 3 weeks now and
have some good working screens up. Ran into something new while I was
debuggina script today.
Tried to echo the $i value within a for loop as part of the list of items I
was buil
On Tue, Mar 22, 2011 at 18:22, Jim Giner wrote:
[snip!]
>
> for ($i=0;$i<$rows;$i++)
> echo $i.' '.$row['itemname'];
>
> I expected to see :
>
> 1 item1
> 2 item2
> ...
> ...
>
> but instead I got
>
> 1 item1
> f item2
>
> Yes - an 'f' and not a 2.
>
> Tried it some more with this:
>
> for ($i=
Kinda new to this, but I've been puttering/writing for about 3 weeks now and
have some good working screens up. Ran into something new while I was
debuggina script today.
Tried to echo the $i value within a for loop as part of the list of items I
was building
Something like
for ($i=0;$i<$rows
I have a question regarding echo of a var/string in a loop on each instance
A shortened example:
Lets say I have an array of values (rather big), and then I loop
through this array:
for or foreach :
{
$value = $arrValAll[$i];
echo "test".$i."--> ".$value;
}
When the script runs it will
On Tue, 2008-12-09 at 16:51 -0500, Eric Wood wrote:
> I have two vars doing the same thing. One is echo'd/unset in the
> section and the other echo'd/unset in the footer of the page.
> No re-direct request is being made.
>
> Ok now check this. If I use this code:
>
> if(isset($_SESSION["Ec
I have two vars doing the same thing. One is echo'd/unset in the
section and the other echo'd/unset in the footer of the page.
No re-direct request is being made.
Ok now check this. If I use this code:
if(isset($_SESSION["Ecomm"])) {
echo $_SESSION["Ecomm"];
unset($_SESSION["Ecomm"]);
On Wed, Dec 10, 2008 at 8:11 AM, <[EMAIL PROTECTED]> wrote:
>
> Fire up Live HTTP Headers in Firefox.
>
Where is this "Live HTTP Headers in Firefox"? Is it an extension?
>
> My theory is that the browser is RE-requesting the data because of the
> private, must-revalidate.
>
> So it goes like this
On Tue, 2008-12-09 at 19:11 +, [EMAIL PROTECTED] wrote:
> Fire up Live HTTP Headers in Firefox.
>
>
>
> My theory is that the browser is RE-requesting the data because of the
> private, must-revalidate.
>
>
>
> So it goes like this:
>
>
>
> Browser -> GET -> Ecomm: fooie ; unset Ecomm
Fire up Live HTTP Headers in Firefox.
My theory is that the browser is RE-requesting the data because of the private,
must-revalidate.
So it goes like this:
Browser -> GET -> Ecomm: fooie ; unset Ecomm
Browser -> GET -> Ecomm: [not set]
If you are using Ajax and JS and whatnot, the p
I set Ecomm to a little javascript code on the previous page then echo it no
the next page.
session_cache_limiter ('private, must-revalidate');
session_start();
. stuff ...
if(isset($_SESSION["Ecomm"])) {
echo $_SESSION["Ecomm"];
unset($_SESSION["Ecomm"]);
}
. stuff ...
For
You can write 2 functions to handle this.
Value and OutputValue
Thank you,
Micah Gersten
onShore Networks
Internal Developer
http://www.onshore.com
Tyler C. wrote:
> Is the a way to have an array, or use __get() to provide different
> data if you are echoing a variable, rather than if you are
Is the a way to have an array, or use __get() to provide different data
if you are echoing a variable, rather than if you are using it in a 'if'
statement?
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Nice trick, I will remember this one.
Thanks for sharing,
Nitsan
On 23/05/2008, Nathan Nobbe <[EMAIL PROTECTED]> wrote:
>
> On Fri, Feb 29, 2008 at 12:16 AM, Nathan Nobbe <[EMAIL PROTECTED]>
> wrote:
>
> > wow, im going to have to stare at some of those and play around with them
> > as soon as im
On Fri, Feb 29, 2008 at 12:16 AM, Nathan Nobbe <[EMAIL PROTECTED]>
wrote:
> wow, im going to have to stare at some of those and play around with them
> as soon as im half awake :)
>
> of course i still like my solution ;) but im excited about the
> experimentation and ideas that have been shared
Nathan Rixham wrote:
> Nathan Nobbe wrote:
>> On Thu, Feb 28, 2008 at 6:14 PM, Nathan Rixham <[EMAIL PROTECTED]> wrote:
>>
>>> if I show you guys how to do this:
>>>
>>> echo sillyFunc()['a'] . PHP_EOL;
>>>
>>> using a few brackets and things do you promise not to laugh?
>>> *it's a bit weird*
>>
>
wow, im going to have to stare at some of those and play around with them as
soon as im half awake :)
of course i still like my solution ;) but im excited about the
experimentation and ideas that have been shared on this topic, very
interesting really!
-nathan
On Fri, 2008-02-29 at 05:34 +, Nathan Rixham wrote:
> Casey wrote:
> >
> > I don't know why I'm continuing this... but for the truly crazy:
> > function w(&$t) {
> > $t = array('f' => '...');
> > return 't';
> > }
> >
> > echo ${w($t)}['f'];
> >
>
>
Casey wrote:
I don't know why I'm continuing this... but for the truly crazy:
function w(&$t) {
$t = array('f' => '...');
return 't';
}
echo ${w($t)}['f'];
addictive isn't it!
casey, I truelly believe that's as short as it can
On Thu, Feb 28, 2008 at 8:42 PM, Casey <[EMAIL PROTECTED]> wrote:
>
> On Thu, Feb 28, 2008 at 8:38 PM, Nathan Rixham <[EMAIL PROTECTED]> wrote:
> >
> > Robert Cummings wrote:
> > > On Thu, 2008-02-28 at 23:27 -0500, Robert Cummings wrote:
> > >> On Fri, 2008-02-29 at 04:04 +, Nathan Rixha
On Thu, 2008-02-28 at 20:42 -0800, Casey wrote:
> On Thu, Feb 28, 2008 at 8:38 PM, Nathan Rixham <[EMAIL PROTECTED]> wrote:
> >
> > Robert Cummings wrote:
> > > On Thu, 2008-02-28 at 23:27 -0500, Robert Cummings wrote:
> > >> On Fri, 2008-02-29 at 04:04 +, Nathan Rixham wrote:
> > >>> Rober
On Thu, Feb 28, 2008 at 8:38 PM, Nathan Rixham <[EMAIL PROTECTED]> wrote:
>
> Robert Cummings wrote:
> > On Thu, 2008-02-28 at 23:27 -0500, Robert Cummings wrote:
> >> On Fri, 2008-02-29 at 04:04 +, Nathan Rixham wrote:
> >>> Robert Cummings wrote:
> On Fri, 2008-02-29 at 00:18 +,
On Fri, 2008-02-29 at 04:38 +, Nathan Rixham wrote:
> Robert Cummings wrote:
> > On Thu, 2008-02-28 at 23:27 -0500, Robert Cummings wrote:
> >> On Fri, 2008-02-29 at 04:04 +, Nathan Rixham wrote:
> >>> Robert Cummings wrote:
> On Fri, 2008-02-29 at 00:18 +, Nathan Rixham wrote:
> >
Robert Cummings wrote:
On Thu, 2008-02-28 at 23:27 -0500, Robert Cummings wrote:
On Fri, 2008-02-29 at 04:04 +, Nathan Rixham wrote:
Robert Cummings wrote:
On Fri, 2008-02-29 at 00:18 +, Nathan Rixham wrote:
don't say I didn't warn ya fellow nathan!
#!/usr/bin/php
1, 'b' => 2, 'c' =
On Thu, 2008-02-28 at 23:27 -0500, Robert Cummings wrote:
> On Fri, 2008-02-29 at 04:04 +, Nathan Rixham wrote:
> > Robert Cummings wrote:
> > > On Fri, 2008-02-29 at 00:18 +, Nathan Rixham wrote:
> > >> don't say I didn't warn ya fellow nathan!
> > >>
> > >> #!/usr/bin/php
> > >> > >> fu
On Fri, 2008-02-29 at 04:04 +, Nathan Rixham wrote:
> Robert Cummings wrote:
> > On Fri, 2008-02-29 at 00:18 +, Nathan Rixham wrote:
> >> don't say I didn't warn ya fellow nathan!
> >>
> >> #!/usr/bin/php
> >> >> function sillyFunc() {
> >>return array('a' => 1, 'b' => 2, 'c' => 3, 'd
Robert Cummings wrote:
On Fri, 2008-02-29 at 00:18 +, Nathan Rixham wrote:
don't say I didn't warn ya fellow nathan!
#!/usr/bin/php
1, 'b' => 2, 'c' => 3, 'd' => 4, 'e'=>'some
string');
}
echo !${~${''}='sillyFunc'}=&${''}().${~${''}}['e'] . PHP_EOL;
I was ready to use this system eve
Robert Cummings wrote:
On Fri, 2008-02-29 at 00:18 +, Nathan Rixham wrote:
don't say I didn't warn ya fellow nathan!
#!/usr/bin/php
1, 'b' => 2, 'c' => 3, 'd' => 4, 'e'=>'some
string');
}
echo !${~${''}='sillyFunc'}=&${''}().${~${''}}['e'] . PHP_EOL;
I was ready to use this system eve
On Fri, 2008-02-29 at 00:18 +, Nathan Rixham wrote:
>
> don't say I didn't warn ya fellow nathan!
>
> #!/usr/bin/php
> function sillyFunc() {
> return array('a' => 1, 'b' => 2, 'c' => 3, 'd' => 4, 'e'=>'some
> string');
> }
>
> echo !${~${''}='sillyFunc'}=&${''}().${~${''}}['e'] . PHP
Nathan Nobbe wrote:
On Thu, Feb 28, 2008 at 6:14 PM, Nathan Rixham <[EMAIL PROTECTED]> wrote:
if I show you guys how to do this:
echo sillyFunc()['a'] . PHP_EOL;
using a few brackets and things do you promise not to laugh?
*it's a bit weird*
id like to see it.
-nathan
don't say I didn'
On Thu, Feb 28, 2008 at 6:14 PM, Nathan Rixham <[EMAIL PROTECTED]> wrote:
> if I show you guys how to do this:
>
> echo sillyFunc()['a'] . PHP_EOL;
>
> using a few brackets and things do you promise not to laugh?
> *it's a bit weird*
id like to see it.
-nathan
On Thu, Feb 28, 2008 at 4:22 PM, Jim Lucas <[EMAIL PROTECTED]> wrote:
> So, I guess my question would be, why not take it one level deeper.
>
> include('ArrayClass.php');
>
> function sillyFunc() {
> return ArrayClass::create(array('a' => 1, 'b' => 2, 'c' => 3, 'd' =>
> 4));
> }
>
> echo sil
Nathan Nobbe wrote:
On Thu, Feb 28, 2008 at 2:36 PM, Ray Hauge <[EMAIL PROTECTED]>
wrote:
That's pretty cool. I wasn't sure if it would work with numerically
indexed arrays, so I tried:
// sillyFunc returns array(0=>1, 1=>2);
ArrayClass::create(sillyFunc())->{"0"}
I just tested it, and that
Nathan Nobbe wrote:
all,
as we have discussed previously, php does not have support for retrieving
array values on the same line in which they are returned. i have created a
simple workaround, and would like to share. first there is the class (w/
other features omitted for the post)
theArray =
On Thu, Feb 28, 2008 at 2:16 PM, Nathan Nobbe <[EMAIL PROTECTED]> wrote:
> all,
>
> as we have discussed previously, php does not have support for retrieving
> array values on the same line in which they are returned. i have created a
> simple workaround, and would like to share. first there i
On Thu, Feb 28, 2008 at 2:36 PM, Ray Hauge <[EMAIL PROTECTED]>
wrote:
> That's pretty cool. I wasn't sure if it would work with numerically
> indexed arrays, so I tried:
>
> // sillyFunc returns array(0=>1, 1=>2);
>
> ArrayClass::create(sillyFunc())->{"0"}
>
> I just tested it, and that works. I
Nathan Nobbe wrote:
all,
as we have discussed previously, php does not have support for retrieving
array values on the same line in which they are returned. i have created a
simple workaround, and would like to share. first there is the class (w/
other features omitted for the post)
theArray =
all,
as we have discussed previously, php does not have support for retrieving
array values on the same line in which they are returned. i have created a
simple workaround, and would like to share. first there is the class (w/
other features omitted for the post)
theArray = $theArray;
}
That's just the case : "too see what happens if ...".
I agree that anyone will never meet such a case in everydays' programming.
;-)
2007/10/23, Andrew Ballard <[EMAIL PROTECTED]>:
>
> On 10/23/07, Robert Cummings <[EMAIL PROTECTED]> wrote:
> > My bad, print is not a function, and so:
> >
> >
On 10/23/07, Robert Cummings <[EMAIL PROTECTED]> wrote:
> My bad, print is not a function, and so:
>
> print( 'toctoc ' ).'hihi ';
>
> is equivalent to:
>
> print( 'tocktoc '.'hihi ' );
>
Ah. I see. I knew they were optional, but I didn't know that when you
include them PHP evaluates ('toc
On Tue, 2007-10-23 at 11:54 -0400, Andrew Ballard wrote:
> On 10/23/07, Robert Cummings <[EMAIL PROTECTED]> wrote:
> > On Tue, 2007-10-23 at 17:34 +0200, Julien Pauli wrote:
> > > > > echo "coucou " . print('v ' . print('u ' . print('toctoc ') . 'hihi
> > > ') ) .
> > > 'tata ' . print('zozo ' . p
> Hello everyone.
>
> We all know the difference between print and echo, but has someone ever
> tried to combine them together ??
>
> Right, try this :
>
> echo "coucou " . print('v ' . print('u ' . print('toctoc ') . 'hihi ') ) .
> 'tata ' . print('zozo ' . print('pupu '));
>
>
> And guess
At 11:46 AM -0400 10/23/07, Robert Cummings wrote:
On Tue, 2007-10-23 at 17:34 +0200, Julien Pauli wrote:
That's not cool, that's a mess. Why doe sit happen the way it does?
First off, print() is a function so nesting functions means the
innermost functions get processed first, this is why th
On 10/23/07, Robert Cummings <[EMAIL PROTECTED]> wrote:
> On Tue, 2007-10-23 at 17:34 +0200, Julien Pauli wrote:
> > > echo "coucou " . print('v ' . print('u ' . print('toctoc ') . 'hihi
> > ') ) .
> > 'tata ' . print('zozo ' . print('pupu '));
>
> That's not cool, that's a mess. Why doe sit happe
On Tue, 2007-10-23 at 17:34 +0200, Julien Pauli wrote:
> echo "coucou " . print('v ' . print('u ' . print('toctoc ') . 'hihi
> ') ) .
> 'tata ' . print('zozo ' . print('pupu '));
That's not cool, that's a mess. Why doe sit happen the way it does?
First off, print() is a function so nesting functi
Hello everyone.
We all know the difference between print and echo, but has someone ever
tried to combine them together ??
Right, try this :
Use the MySQL function that converts timestamp into Unixtime.
Or, better yet, use the MySQL function that outputs exactly the date
format you want, without dinking around with Unix timestamp in the
middle.
http://dev.mysql.com/
Search for date_format() I do believe.
It's gonna be a whole lot li
2:05 AM
To: PHP-General
Cc: John Taylor-Johnston
Subject: [PHP] echo date('Y-m-d', $mydata->timestamp);
$mydata->timestamp = "20070419162123";
echo date('Y-m-d', $mydata->timestamp);
result: 2038-01-18
?? What is wrong?? Should be 2007-04-19?
--
PHP G
John Taylor-Johnston wrote:
>
> It is actually a generated timestamp in MySQL.
> timestamp(14)
> Now what? I was hoping to avoid:
> |echo substr(|$mydata->timestamp|, 0, 8);
the simplest answer is actually yto make mySQL give you
the data in unix timestamp format in the first place:
SELECT UNIX_
On Sunday 22 April 2007 08:33, John Taylor-Johnston wrote:
> It is actually a generated timestamp in MySQL.
> timestamp(14)
Well, then just use the query to decide how it should look like.
Mysql timestamp is amazingly easy to work with.
whatevertable,date_format(timestamp_table, 'what should it lo
It is actually a generated timestamp in MySQL.
timestamp(14)
Now what? I was hoping to avoid:
|echo substr(|$mydata->timestamp|, 0, 8);
John
|Richard Lynch wrote:
On Sun, April 22, 2007 1:05 am, John Taylor-Johnston wrote:
$mydata->timestamp = "20070419162123";
echo date('Y-m-d', $mydata-
On Sun, April 22, 2007 1:05 am, John Taylor-Johnston wrote:
> $mydata->timestamp = "20070419162123";
>
> echo date('Y-m-d', $mydata->timestamp);
>
>
> result: 2038-01-18
>
> ?? What is wrong?? Should be 2007-04-19?
date() takes a Unix timestamp as its input.
Unix timestamps are measured as number
$mydata->timestamp = "20070419162123";
echo date('Y-m-d', $mydata->timestamp);
result: 2038-01-18
?? What is wrong?? Should be 2007-04-19?
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
On Sat, April 21, 2007 5:20 pm, Tijnema ! wrote:
> But what else would you use a lot in your code?
> all commonly used things (like while, if, echo, etc) are just (nearly)
> as fast as their alternatives (for, print, etc).
> Other functions (like file/stream) might be some performance
> difference,
Tijnema ! wrote:
On 4/22/07, Stut <[EMAIL PROTECTED]> wrote:
Tijnema ! wrote:
> But what else would you use a lot in your code?
> all commonly used things (like while, if, echo, etc) are just (nearly)
> as fast as their alternatives (for, print, etc).
> Other functions (like file/stream) might b
On 4/22/07, Stut <[EMAIL PROTECTED]> wrote:
Tijnema ! wrote:
> But what else would you use a lot in your code?
> all commonly used things (like while, if, echo, etc) are just (nearly)
> as fast as their alternatives (for, print, etc).
> Other functions (like file/stream) might be some performance
Tijnema ! wrote:
But what else would you use a lot in your code?
all commonly used things (like while, if, echo, etc) are just (nearly)
as fast as their alternatives (for, print, etc).
Other functions (like file/stream) might be some performance
difference, but you probably use this only a few ti
On 4/21/07, Stut <[EMAIL PROTECTED]> wrote:
Tijnema ! wrote:
> On 4/21/07, Stut <[EMAIL PROTECTED]> wrote:
>> Tijnema ! wrote:
>> > There is a difference, echo is slightly faster.
>> > code used for benchmark:
>> > > > $start = microtime(TRUE);
>> > for ($i=0; $i<10; ++$i) { print "ABC"; }
>>
Tijnema ! wrote:
On 4/21/07, Stut <[EMAIL PROTECTED]> wrote:
Tijnema ! wrote:
> There is a difference, echo is slightly faster.
> code used for benchmark:
> $start = microtime(TRUE);
> for ($i=0; $i<10; ++$i) { print "ABC"; }
> echo sprintf("With print ($i): %0.3f\n",microtime(TRUE) - $star
On 4/21/07, Stut <[EMAIL PROTECTED]> wrote:
Tijnema ! wrote:
> On 4/18/07, Richard Lynch <[EMAIL PROTECTED]> wrote:
>> On Tue, April 17, 2007 1:40 am, Christian Haensel wrote:
>> > Whenever I see people put their code up for review, I realize they
>> > mostly
>> > use print instead of echo, while
Tijnema ! wrote:
On 4/18/07, Richard Lynch <[EMAIL PROTECTED]> wrote:
On Tue, April 17, 2007 1:40 am, Christian Haensel wrote:
> Whenever I see people put their code up for review, I realize they
> mostly
> use print instead of echo, while I am using echo 99% of the time.
> Actually,
> I can't e
On 4/18/07, Richard Lynch <[EMAIL PROTECTED]> wrote:
On Tue, April 17, 2007 1:40 am, Christian Haensel wrote:
> Whenever I see people put their code up for review, I realize they
> mostly
> use print instead of echo, while I am using echo 99% of the time.
> Actually,
> I can't even remember when
On Tue, April 17, 2007 1:40 am, Christian Haensel wrote:
> Whenever I see people put their code up for review, I realize they
> mostly
> use print instead of echo, while I am using echo 99% of the time.
> Actually,
> I can't even remember when I last used the regular print.
There used to be a diff
:
Sent: Tuesday, April 17, 2007 9:48 AM
Subject: Re: [PHP] echo or print ?
On 4/17/07, Christian Haensel <[EMAIL PROTECTED]> wrote:
Good morning fellow coders
I've been working with PHP for a little over 5 years now, and it even got
me
a cute office and a good salary... but even t
On 4/17/07, Christian Haensel <[EMAIL PROTECTED]> wrote:
Good morning fellow coders
I've been working with PHP for a little over 5 years now, and it even got me
a cute office and a good salary... but even though I can make a living off
of it, I am still wondering about a few little things.
When
Me too. I use echo. Print is a function.
There's no significant difference between them. My advice: choose one,
and stick with it.
On 4/16/07, clive <[EMAIL PROTECTED]> wrote:
> What do you guys use, and what is the advantage (if ther is any) of
> print over echo? And I am not talking about pr
What do you guys use, and what is the advantage (if ther is any) of
print over echo? And I am not talking about print_r or anything, just
the regular print. :o)
print returns a result, echo doesn't. This makes echo slightly faster
than print, but I doubt theres any significant speed improvem
Good morning fellow coders
I've been working with PHP for a little over 5 years now, and it even got me
a cute office and a good salary... but even though I can make a living off
of it, I am still wondering about a few little things.
Whenever I see people put their code up for review, I reali
Richard Lynch wrote:
> You could also use %XX in HEX on the mailto:
you can actually randomly mix and match hex and entity encoding,
which is what the function I posted elsewhere in the thread does.
My function also does that: http://themfund.com/snippets/test.php
On 3/1/07, Jochem Maas <[EM
Richard Lynch wrote:
> You could also use %XX in HEX on the mailto:
you can actually randomly mix and match hex and entity encoding,
which is what the function I posted elsewhere in the thread does.
>
> On Tue, February 27, 2007 11:09 pm, Casey Chu wrote:
>> It works. =P I tested it.
>>
>> Try i
http://themfund.com/snippets/test.php
Has %HEX, &#entity;, and even a entity version of the hex!
On 2/28/07, Richard Lynch <[EMAIL PROTECTED]> wrote:
On Wed, February 28, 2007 1:20 am, Stut wrote:
> Of all the possible methods, entities are the easiest for bots to
> handle. They just need to de
On Wed, February 28, 2007 1:20 am, Stut wrote:
> Of all the possible methods, entities are the easiest for bots to
> handle. They just need to decode the entities.
>
> More reliable methods involve using javascript to write out the
> mailto:
> tag. Do it in several statements. But even then, some o
You could also use %XX in HEX on the mailto:
On Tue, February 27, 2007 11:09 pm, Casey Chu wrote:
> It works. =P I tested it.
>
> Try it here! =P
>
> http://themfund.com/snippets/test.php
>
> On 2/27/07, Casey Chu <[EMAIL PROTECTED]> wrote:
>> I'm not sure with both of your questions. I'm too lazy
On Tue, February 27, 2007 10:22 pm, John Taylor-Johnston wrote:
> I need an anti-spam-spider measure for my site. Too many addresses are
> getting raked. In once instance, I created a flash page:
> http://erasethis.glquebec.org/English/contact.htm
> But I just don't have the time to create a flash
Can I PHP generate a flash *.swf? How?
If not how do I PHP generate a *.png or gif?
Jochem Maas wrote:
Stut wrote:
Of course the best way is to use an image and don't link it.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
On 2/28/07, tedd <[EMAIL PROTECTED]> wrote:
At 11:22 PM -0500 2/27/07, John Taylor-Johnston wrote:
>I need an anti-spam-spider measure for my site. Too many addresses
>are getting raked. In once instance, I created a flash page:
>http://erasethis.glquebec.org/English/contact.htm
>But I just don'
At 11:22 PM -0500 2/27/07, John Taylor-Johnston wrote:
I need an anti-spam-spider measure for my site. Too many addresses
are getting raked. In once instance, I created a flash page:
http://erasethis.glquebec.org/English/contact.htm
But I just don't have the time to create a flash image for ever
Stut wrote:
> John Taylor-Johnston wrote:
>> Neat, and thnaks.
>> How spam-spider-proof is it? I will try this though.
>> But I will also try it with "mailto:"; in entities as well.
>> Thanks!
>> John
>>
>>
>> > href="mailto:me@somewhere.com";>me@somewhere.com
>>
>>
>
> Of all the possible metho
John Taylor-Johnston wrote:
Neat, and thnaks.
How spam-spider-proof is it? I will try this though.
But I will also try it with "mailto:"; in entities as well.
Thanks!
John
href="mailto:me@somewhere.com";>me@somewhere.com
Of all the possible methods, entities are the easiest for bots to
h
Neat, and thnaks.
How spam-spider-proof is it? I will try this though.
But I will also try it with "mailto:"; in entities as well.
Thanks!
John
mailto:me@somewhere.com";>me@somewhere.com
Casey Chu wrote:
It works. =P I tested it.
Try it here! =P
http://themfund.com/snippets/test.php
On 2
Try using Javascript? Or use all entities? For example:
mailto:php-general@lists.php.net would turn into
mailto:php-general@lists.php.net
On 2/27/07, John Taylor-Johnston
<[EMAIL PROTECTED]> wrote:
I need an anti-spam-spider measure for my site. Too many addresses are
getting raked. In once in
^ So put that into a tag.
On 2/27/07, Casey Chu <[EMAIL PROTECTED]> wrote:
Try using Javascript? Or use all entities? For example:
mailto:php-general@lists.php.net would turn into
mailto:php-general@lists.php.net
On 2/27/07, John Taylor-Johnston
<[EMAIL PROTECTED]> wrote:
> I need an anti-sp
I need an anti-spam-spider measure for my site. Too many addresses are
getting raked. In once instance, I created a flash page:
http://erasethis.glquebec.org/English/contact.htm
But I just don't have the time to create a flash image for every single
instance, most of which come from dynamically
It works. =P I tested it.
Try it here! =P
http://themfund.com/snippets/test.php
On 2/27/07, Casey Chu <[EMAIL PROTECTED]> wrote:
I'm not sure with both of your questions. I'm too lazy to try.
Untested: But to encode it, you would use
preg_replace_callback('~([\d\w])~', create_function('$a',
I'm not sure with both of your questions. I'm too lazy to try.
Untested: But to encode it, you would use
preg_replace_callback('~([\d\w])~', create_function('$a', 'return
"&#".ord($a[0]).";";'), $theEmail);
Hopefully that works?
On 2/27/07, John Taylor-Johnston
<[EMAIL PROTECTED]> wrote:
How
How do I encode it? And would the href tag work?
Casey Chu wrote:
^ So put that into a tag.
On 2/27/07, Casey Chu <[EMAIL PROTECTED]> wrote:
Try using Javascript? Or use all entities? For example:
mailto:php-general@lists.php.net would turn into
mailto:php-general@lists.php.net
On 2/27/
Fahad Pervaiz wrote:
> ECHO is a language construct but still is there any work around to override
> it or change its functionality???
if your willing to hack the php source then you can pretty much do whatever you
want;
that said there is no mechanism for overriding echo or any other language
c
Fahad Pervaiz wrote:
ECHO is a language construct but still is there any work around to override
it or change its functionality???
Nope. You're stuck with how it works now.
--
Postgresql & php tutorials
http://www.designmagick.com/
--
PHP General Mailing List (http://www.php.net/)
To unsubscr
Why do you need to change its functionality?
On 12/18/06, Fahad Pervaiz <[EMAIL PROTECTED]> wrote:
ECHO is a language construct but still is there any work around to override
it or change its functionality???
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www
ECHO is a language construct but still is there any work around to override
it or change its functionality???
thank you for schooling me :) i learn something new everyday!
- Original Message -
From: "Richard Lynch" <[EMAIL PROTECTED]>
To: "benifactor" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, October 09, 2006 11:02 AM
Subject: Re: [PHP] ECHO $variable
> On Mon,
On Mon, October 9, 2006 7:45 am, benifactor wrote:
> the way i posted worked fine with out either... he doesn't need to use
> these
> to format the way his output is displayed, he only needs to use the
> proper
> php syntax if i am correct.
You were wrong, and you're still wrong. :-)
Try it and s
On Sun, October 8, 2006 1:39 am, Ron Piggott (PHP) wrote:
> In one of my scripts I have
>
> value=" $saved_message_title;?>">
>
> where
>
> $saved_message_title is 1 Peter 5:7 "Cast all your cares on Him for He
> cares about you"
> --- note the "
>
> When this is displayed on the screen $saved_mes
e quotes as well?
Then your solution breaks anyway...
Like Chris said, you should be using htmlentities for output...
John W
- Original Message -
From: "Penthexquadium" <[EMAIL PROTECTED]>
To:
Sent: Sunday, October 08, 2006 1:41 AM
Subject: Re: [PHP] ECHO $variable
&g
Ron Piggott wrote:
> When this is displayed on the screen $saved_message_title reads
>
> 1 Peter 5:7
>
> I am assuming the " closes the value=
>
> How may I echo this to the screen and have the full text be
> displayed, not just 1 Peter 5:7 ?
http://php.net/htmlentities
You should really be u
ober 08, 2006 1:41 AM
Subject: Re: [PHP] ECHO $variable
> On Mon, 9 Oct 2006 00:23:00 -0700, "benifactor" <[EMAIL PROTECTED]> wrote:
> > you should try this...
> >
> > $saved_message_title = '1 Peter 5:7 "Cast all your cares on Him for He
> > c
t;Ron Piggott (PHP)" <[EMAIL PROTECTED]>
> To: "PHP General"
> Sent: Saturday, October 07, 2006 11:39 PM
> Subject: [PHP] ECHO $variable
>
>
> > In one of my scripts I have
> >
> >
> >
> > where
> >
> > $saved_messag
you should try this...
$saved_message_title = '1 Peter 5:7 "Cast all your cares on Him for He
cares about you"';
- Original Message -
From: "Ron Piggott (PHP)" <[EMAIL PROTECTED]>
To: "PHP General"
Sent: Saturday, October 07, 2006 11:39 PM
In one of my scripts I have
where
$saved_message_title is 1 Peter 5:7 "Cast all your cares on Him for He
cares about you"
--- note the "
When this is displayed on the screen $saved_message_title reads
1 Peter 5:7
I am assuming the " closes the value=
How may I echo this to the screen and
Dave Goodchild wrote:
This may clarify - in php, integer and associate arrays are created
arbitrarily, ie keys can be numbers or strings. So, either create an array
like this:
array('1' => 'first element',
'2' => 'second element');
if I'm not mistaken the above example will result in an
1 - 100 of 291 matches
Mail list logo
