philippe_44 wrote:
> I'm not following. It works today on LMS (any version) and armv5+. The
> 2.x have beenc ompiled for armv6+ (better optimizations) and to avoid
> issue with automatic updates for people having a armv5, I'm limiting LMS
> support to 8.2+ as it is a bit more unlikely that
philippe_44 wrote:
> I've decided to set the min version for the updated plugins to be LMS
> 8.2 which is unlikely to be used on these very old NAS. I'm not sure
> exactly what that might imply when you have both the dev and the normal
> repo activated.
Does that also mean the the coming v 2.x
Is there any fallback version in case 3.0.3 becomes problematic?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=109624
Better to go into the plugin section in Material, then all updated
plugins will be shown at the top and you can choose which one to update
(if there are more than one). Or use the Settings window in the default
skin.
slartibartfast wrote:
> I only have 3, one of which has "Speak To Me/Breathe" as one track so it
> doesn't get used to test gapless [emoji1787]
>
Got two on LP, both gapless.
Zombie's Profile:
philippe_44 wrote:
> Rollback means rollback so unless you have added the dev repository in
> the list, then when you remove the plugin, next time you install you
> have the 1.x version. But you must remove the dev repo from the list of
> repos
Thanks, I realised that when I opened this post.
Rollback, what does it mean? I removed the 2.1.8 and reinstalled the
bridge and have 2.12.1. Is that the same as 1.x.x smth?
Or how do I proceed to get the "working" version before last weekend? I
see there are several versions, but I don't know how to install them.
Can anyone give a pointer to
A minor peculiarity: For the first time I could use the non-static
alternative (with 2.1.8) and it actually removed the small gaps between
tracks on DSOTM and other small gaps on Tidal and Radio Paradise. That
was last night. Today the streamer had lost contact to LAN. Did restarts
etc., but
Being totally without knowledge about these things, is there any
possibility that the two other UPnP-related plugins interfere?
The users that have trouble now should maybe uninstall them if they are
installed and see if things improve.
Being totally without knowledge about these things, is there any
possibility that the two other UPnP-related plugins interfere?
The users that have trouble now should maybe check and uninstall them if
they are installed and see if things improve.
Hello! 2.1.6 works for me so far. No surprises. If I install 2.1.11 but
it doesn't work, how I do I revert to 2.1.6?
By adding the direct link to 2.1.6 in the repository (or dnload it and
point to the dnload folder)?
Thanks, will check tomorrow
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=117224
___
When I pin Tidal on the home screen the menu changes from the normal
Tidal to some radio app menu after a day or less.
Anyone else experienced this?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
self, money is the least thing I'm
> interested by :)
If I'd known how to revert to an earlier version I would have used it
and shut up. This was the first time a plugin caused hickups so I have
never asked about how to revert them.
Thanks, and again, sorry. I promise
2.1.6.1 works fine with the DSOTM track 1 and 2. No gap. Thank you for
the hard work!
Don't dare to upgrade to 2.1.7 if I can't revert to 2.1.6.1, though.
(And to my defense for being grumpy: I actually posted about the problem
already on Friday/Saturday, together with log snippets etc. A short
Great. Looking forward to the update when it arrives.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116980
slartibartfast wrote:
> That sounds like my experience. Have you tried playing a gapless album?
There are gaps in the local version of DSOTM. There weren't when I
fine-tuned the plugin several weeks ago.
Zombie's
Thank for the lecture on life.
I asked earlier what version UPnP had before the recent chain of updates
started to be able to revert and stop the automatic updates.
Thank you for maintaining it, but for me it meant that my player stopped
working normally, which it did for about two months.
Sure. The whole chain of events started with you fiddling with the UPnP
plugin.
It worked fine some days ago before the series of "updates" begun.
Now I sit here for the first time with an unreachable server since began
using LMS 15 years ago.
I removed the plugin folder (zipped it) from LMS and also the prefs file
(zipped)
Restarted LMS on the NAS and still no acces to LMS through the web.
What log file do you want to see?
Zombie's Profile:
philippe_44 wrote:
> Just remove the bridge and if you want to help then give me a log before
> so I can understand the issue.
I can't do anything because I have lost access to LMS.
Zombie's Profile:
Now I have lost access to the LMS server on my NAS for ALL devices, even
for Boom and SB Radio.
During 15 years of using LMS I have NEVER experienced anything like
this.
What the hell is going on?
Zombie's Profile:
Which one is the working version of the UPnP Bridge?
Or do we have to resort to some other UPnP Bridge to have a working
streamer?
All was working fine until some days ago and now it cocks up in every
conceivable way.
And now this in a middle on an album on Tidal
genre:TIDAL
duration:144.000
size:0
cover:
offset:1
[12:22:16.740199] sq_callback:357 [0xb3f520]: set current URI (*) (s:0)
http://192.168.10.150:54679/bridge-8.flac
[12:22:16.740261] AVTSetURI:78 [0xb3f520]: uPNP
This happens when I play Radio Paradise:
[10:18:43.411916] sq_callback:357 [0xb3f520]: set current URI (*) (s:0)
http://192.168.10.150:45949/bridge-4.flac
[10:18:43.411961] AVTSetURI:78 [0xb3f520]: uPNP setURI
http://192.168.10.150:45949/bridge-4.flac (cookie 0x29a4)
[10:18:43.412096] AVTPlay:138
slartibartfast wrote:
> In player settings/audio. Do you use replaygain for your local library?
Yes, but I wondered if Tidal follows the setting for streaming services
Zombie's Profile:
slartibartfast wrote:
> Tidal has replaygain
Where do I set that?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=117198
Is it following the general volume of streaming services (radio
streams)? Difficult to pin down because Tidal tracks seem to have
different gain.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
firedog wrote:
> modern phones have SD cards
I'm not interested in anything Apple. Tax-evading and ripping their
users off.
So, yes I am ignorant.
My suggestion still stands as the easiest and best: Get a modern
smartphone with a 128 GB SD card and copy thousands of tracks onto it.
Problem
firedog wrote:
> What's the point of your response?
The point was to show you a much simpler solution than to fiddle with
VPN etc. and expose your server.
You ask for a quite advanced solution and then play the luddite card
that you have no SD card in your phone...amusing.
Thank you.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
___
plugins mailing
Is the original Inguz thread removed? Can't find it, last post wasn't
that long ago.
Anyway, have I understood it correctly that Flatness only works if the
is a Room Correction filter activated?
How about the Quietness? Does it only work with an activated Room
Correction filter or generally
Didn't change anything, though.
Still several album recur in a less balanced or balanced shuffle.
Strange.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Brilliant! That's why I didn't find it, hidden under Performance.
Thanks! :D
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=117118
Some years ago there was a new feature that took some more system
resources, but it shuffled tracks a bit less random but more "similar".
I found the random album window where I get 50 random albums to choose
from, but many albums are the same in different shuffles. I suspect it
might be this
It is a change from plugin.xml to repo.xml?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
What's the point? I have 9500 tracks with sufficient quality on an SD
card in my phone. Also use it in the car through Bluetooth. No need to
complicate things.
Zombie's Profile:
Apesbrain wrote:
> In your system, where is LMS running?
On a NAS in the next room. The only difference was that I changed the
sensitivity from -16 to -18 and -17. Now it's back to -16 and random
tracks seem the same level
Apesbrain wrote:
> What do you mean by "the replay gain function is gone"?
While playing tracks from my NAS yesterday there was some 10 dB
difference between some tracks. I uninstalled EQ and the difference was
gone.
Noticed now that the replay gain function is gone. Uninstall EQ and it
is back.
Didn't notice that earlier today.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
I have not much knowledge about digital audio techniques, I'll have to
do a "for dummies>" readup on the most important concepts for my room
correction attempts.
I have correction files from REW (I think) separated for left and right,
but don't know how to apply them. I read a simple explanation
Sry for serial posting. :)
Concerning keeping the last preset, if I understand right it is
server-based, not player-based.
If so, is it possible to make it player-based instead?
I have a preset with 9 dB lift at 60 Hz (room thing), but that would be
quite overwhelming for a Boom or SB Radio.
foxesden wrote:
>
> /var/lib/squeezeboxserver/prefs/InguzEQ on linux.
I find the Settings folder and the log here:
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/prefs/InguzEQ$
ยด
Difficult to find with the NAS browser, must use SSH, but convention is
convention.
About presets...will the server restart with the latest used preset
before shutdown?
It seems it does but the active preset is not shown in the field Load a
preset
It would be "reassuring" to see the active preset in the window after a
restart. :)
I have adjusted some dips and peak in the freq
Another function: separate adjustment for left and right channel
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=117091
Apesbrain wrote:
> Exactly.
Great. I suspect I must have one brain cell bouncing about in that empty
head of mine. ;)
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Apesbrain wrote:
> If you see CLIPPING+ in the log, then you need to reduce the Inguz
> "gain" value. You do this in the following file:
> "C:\Program Files
> (x86)\Squeezebox\server\Bin\MSWin32-x86-multi-thread\InguzDSP.exe.config"
I use the Linux x64 I think, but can't find any .config file
I use Replay Gain and all files were recently analysed and tagged with
Foobar (did it better than MP3Tag). I use fixed volume on the
streamer/DAC (non-SB).
I'll check the peak tag for the files that had distortion. Easier to
hear in transistor radio mode, otherwise it is masked.
I don't have MQA
Corrections without delay would also be nice.
Adjust a slider and the sound changes almost immediately :p
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Got it working on the big system now, but there were three "issues":
1. I used the "transistor radio" setting and I could hear clipping of
the signal, which is worrying
2. When random play plays a Tidal track (flac), the EQ settings are
inactivated. (Didn't test if they were activated again if
foxesden wrote:
> NB there is nothing wrong with what C3PO is doing, just that it and
> Inguz don't play nicely together.
I don't know what C3PO is and haven't seen it installed.
It struck me that there might a conflict between what UPnP does and the
LMS. If the LMS is set to send out FLACs to
I bought the Umik1 and dnloaded REW to correct the frequency response in
the room.
I don't know much about DSP (yet) and room correction, but an easy
import function for correction parameters would be welcome.
Zombie's
The stream was Radio FIP Rock, 252kbit/s CBR AAC (HLS), played on a SB
Boom. I could adjust he sound with the 5-band equaliser. Changes took
effect after stopping and restarting the stream.
Later I tried to play FLACs from the NAS through the UPnP plugin in LMS
and I have set the stream to PCM,
Tested this morning and it worked nicely on two radio streams, but when
I played files on my NAS just now, nothing happened.
A uninstall and I could play files from NAS again. Good to see it worked
with smth at least :)
Installation was quick, I didn't even noticed it happened.
Did some adjustments on my Boom and it seems to work.
You are a genius!
Thank you for you hard work!
Now I have to figure out how to get the measured compensations into the
plugin :)
philippe_44 wrote:
> If your player is not capable of 24/96kHz (I mean the capabilities that
> the bridge reports to LMS, not the real player itself)
I solved it. Unmarked the Flow box.
Zombie's Profile:
I removed the tick in the box Flow to show correct sampling freq in the
streamer display and set Transcoding to PCM to get replay gain
Will remove the previous post.
Zombie's Profile:
philippe_44 wrote:
> If your player is not capable of 24/96kHz (I mean the capabilities that
> the bridge reports to LMS, not the real player itself)
I have set 192 in UPnP settings. The questions is if it plays 24/96 or
if smth downsamples it to 44,1.
Under what circumstances would a 24/96 stream show as PCM 44.1 kHz on
the streamer/DAC screen?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
I was thinking about menu items for mood/style/theme to choose from. But
there might be a problem to associate the local/remote albums/tracks
with such tags if they're not already present. I haven't found any tool
for adding such tags to my existing files, nor any tags database that is
available
Btw, here's the log from the evening of the 21 Oct before I gave up
(Part 1):
https://drive.google.com/file/d/1O8yIWwsBmKKm5b6Kz_oLvIHw9qfHnndh/view?usp=share_link
Zombie's Profile:
Found this in the log:
[22-10-30 07:23:50.7831] Slim::Networking::Repositories::__ANON__ (147)
Failed to fetch
http://downloads.sourceforge.net/project/lms-to-upnp/dev/repo-sf.xml:
404 Not Found
Has the address changed?
mherger wrote:
> >Would you want to have this for non-local tracks only?
It would be nice to have it for all tracks since the integration is very
good and useful.
Zombie's Profile:
I noticed when I play tracks from Radio Paradise or FIP Rock that there
are some menus under [Three dots] -> More -> Album information -> Album
details -> Genre/Mood/Styles (Material skin)
Does this info come from allmusic?
I would be neat to have this list handy under My music (yes, genres are
I was told by Material to restart the server and that usually means a
plugin update. This time it took a bit longer. It was the UPnP plugin
that updated, but I didn't know that until just now.
But after the restart I thought to myself: "Strange, it sounds a little
better after the restart.
Thank you. I used the docker before QLogitechMediaServer saved me :)
https://forums.slimdevices.com/showthread.php?108702-QLogitechMediaServer-for-Qnap-with-QTS-4-2-or-higher-and-x86_64-I686-X86-support-!=Qlogitech
I didn't run the picore ph script yesterday because I already had the
files on disk. I also modified it to change the folder locations.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this
The LMS is running in a QNAP app called QLogitechMediaServer. Earlier it
ran in a container. The QNAP LMS app is documented in this forum.
When I started playing music this morning it didn't play, just jumped
from song to song, but no sound. Like it behaved during the early
installation
Nope. No files or folders in InguzEQ.
I have been using a player all night. Apart from the restarts.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
It exists: admin@192.168.10.150:/usr/share/InguzEQ$
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
foxesden wrote:
>
>
> 38946
I don't have this. It is empty. That's the error.
I save a change in EQ as Test. It is saved but doesn't show up in the
list of settings.
But in the folder
/share/CACHEDEV1_DATA/.qpkg/LogitechMediaServer/SlimServer/prefs/plugin
the conf file points to a
I do sudo chmod 777 InguzDSP in usr/share but get:
chmod: InguzDSP: No such file or directory
I don't understand.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Not execute the picore-setup.sh
Should the .1 files also be there or are they just double dnloads?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
So the actual plugin I install (the one on the plugin page) is not
important at all? Or should I install it, too?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Hello
Sry to be a blockhead. I'm trying to get what is what here.
I install a plugin, but is that the actual program and configuration
file or just a shell with a layout?
What is the name of the "program" and "its configuration file"?
I put the InguzDSP and its .dll in
Nothing works.
"on this install the program files (executable) should be installed
here
/usr/share/squeezeboxserver/Bin/x86_64-linux"
What does the above mean, what program files (executable)?
"cd /usr/share/squeezeboxserver/Bin/x86_64-linux (or equivalent
folder)"
What does equivalent folder
Great. I'll try tonight and hope for the best. Thank you.
I assume I execute the commands above in the SSH window.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
OK, thank you.
It's no inconvenience, I appreciate your effort.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116119
I asked in the LMS forum and got this answer:
"Every OS handles files slightly different. QNAP being a NAS, not a
standard Linux, means it's likely to do things differently than your
desktop OS. See Settings/Information in LMS for the relevant paths."
Thank you for taking your time.
I have admin rights and with SSH I see it all, I think.
Here are the dirs on the NAS:
- The plugin dir where it installs the main files:
admin@192.168.10.150:/share/Logitech Media
Server/SlimServer/Cache/InstalledPlugins/Plugins/InguzEQ$
- The sox dir which is
foxesden wrote:
> I have compiled a linux x64 version and it is available here
> https://github.com/Foxenfurter/inguz-InguzDSP/tree/Upgrade2Net6/publishLinux-x64
I'm in deep waters now, but I change the contents of the picore-setup.sh
file to:
#!/bin/sh
#
# picore-setup.sh
#create missing
foxesden wrote:
> I have compiled a linux x64 version and it is available here
> https://github.com/Foxenfurter/inguz-InguzDSP/tree/Upgrade2Net6/publishLinux-x64
Great! Thank you. Will test it tomorrow.
Zombie's
foxesden wrote:
> What QNAP box are you using? I maybe able to figure out what combination
> to build from that and upload a version.
Thanks, I have a TS-251+
Zombie's Profile:
It works fine. :)
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=103728
___
plugins
Ping!
Anyone know where I can find files for other OSs that Win and Debian to
get Inguz working?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Thank you for the support. Have a nice weekend!
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=103728
Would this be OK:
Transcode - flac
Flow 24 bits PCM - packed type 1
Show advanced options
Flac compression - 0
Resample at - source
Sample size - source
I assume resample at source would mean to not resample?
(Quite complicated stuff)
slartibartfast wrote:
> As far as I know replaygain only works in the upnp/DNLA bridge if
> transcoding is turned on.
Do you mean passthrough or full processing?
Zombie's Profile:
Got my new baby up and running, but during random playback it doesn't
seem to follow the replay_gain tag in the (mostly) FLAC files.
It's quite disturbing when the -10 dB tracks come up.
I have activated to send metadata to the streamer in the UPnP plugin
(without cover art).
What might be
Is there any new manual for the bridge? Seems the instruction don't
always correspond to the existing interface.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
I figured out that the directories weren't correct and found the
corresponding directories in my NAS and pasted the config and dll file
into all three suspects, arm, i386 and x386.
The file types showed InguzDSp, but didn't play. Removed the dll and the
config from all folders and added them to
OK, so I ran sh picore-etc.sh in its directory and a dnload started.
The directory structure is not the same so I need to find which files to
copy to my structure...
The file types are not configured as the pic above, but greyed out. The
balance test doen't change anyting.
Welcome to Smart
Hello
I installed the plugin but I am at loss with the DSP stuff.
How do I do if my LMS runs on a QNAP NAS, TS-251+?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Thanks! Did a search for Inguz EQ. Only old hits.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116847
Doesn't seem too popular, though. Most posts are ten years old.
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=116847
Is there any room correction plugin that cooperates with room correction
software like REW or similar?
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread:
Thanks for the clarification, Paul
Zombie's Profile: http://forums.slimdevices.com/member.php?userid=25009
View this thread: http://forums.slimdevices.com/showthread.php?t=103728
castalla wrote:
> Everything depends on how a streamer device has dlna/upnp implemented -
> some will work with no issues, others can prove complicated to fine
> tune.
> Also, do you want a streamer with a display? If so, then this can also
> prove problematical to get metadata (album art)
Thinking abut buying a streamer/DAC and connect it to LMS (used a Touch
for ages).
There are so may pages to read in this thread so I ask you users: Does
this app work well?
Is it exactly like having a Touch connected to LMS using the web
interface, especially the ability to mix freely randomly
You're lucky. My Boom always goes to 99 after the server restarts.
Nobody seem to know what it might be or where in the config files the
setting changes. Only solution seems to be a clean reinstall of the
server.
Zombie's
1 - 100 of 196 matches
Mail list logo