d6jg wrote:
> IMHO this is a waste of time. If you ever get LMS successfully installed
> on a 212 you are more than likely to find it broken after the next
> firmware update.
> Leave your music on the QNAP but get yourself a Pi3 install piCorePlayer
> and then LMS and point it at the NAS. It's no
IMHO this is a waste of time. If you ever get LMS successfully installed
on a 212 you are more than likely to find it broken after the next
firmware update.
Leave your music on the QNAP but get yourself a Pi3 install piCorePlayer
and then LMS and point it at the NAS. It's not difficult and now far
Ok I now opened a thread in qnapclub... up to now I have no answers. In
case of somebody has an idea I share the link to this thread here.
https://forum.qnapclub.de/thread/45188-spotty-auf-qnap-ts212/
Thank you for your help!!!
--
I tried with entware-ng than with cpan. No success. [emoji37] [emoji31]
I think you should try to get in touch with the QNAP community.
--
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/
mherger wrote:
> Oh, multiple rather QNAP related issues:
>
> - You need to install IO::Socket::SSL. See eg.
> http://forums.slimdevices.com/showthread.php?107615-Announce-Spotty-v1-1-0&p=890362&viewfull=1#post890362
> - I think there's a version conflict in some Perl module between system
> wid
Oh, multiple rather QNAP related issues:
- You need to install IO::Socket::SSL. See eg.
http://forums.slimdevices.com/showthread.php?107615-Announce-Spotty-v1-1-0&p=890362&viewfull=1#post890362
- I think there's a version conflict in some Perl module between system
wide installed, and LMS own. Se
I tried to install Spotty on my Qnap TS-212, CPU Marvell 6281 1.2GHz,
but it doesn't work. I can't install it. Perhaps I did something wrong.
I tried to install version 1.4.1 from the app menue, from third party
apps. I marker the box. The Squeezebox does make a reset. When I look
now again in the
Hi,
thank you for supporting spotty so well!!
I tried to install Spotty on my Qnap TS-212, CPU Marvell 6281 1.2GHz,
but it doesn't work. I can't install it. Perhaps I did something wrong.
I tried to install version 1.4.1 from the app menue, from third party
apps. I marker the box. The Squeezebox
Thanks for your testing anyway!
I indeed got it working on my ReadyNAS Duo v2 with 256MB RAM... Don't
know how reliable it would work (I'll stick with the Pi3 - it's much
faster!). It pegged the CPU for several seconds after starting playback.
And it obviously is using some swap space. But hey, i
mherger wrote:
>
> I think this has been discussed in ReadyNAS related discussions before.
>
> I'd suggest you head over to the ReadyNAS forums and ask around there.
> They should be more helpful than I can be.
>
> --
>
> Michael
Not a problem now that I have retired the ReadyNAS from LMS
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
libio-socket-ssl-perl : Depends: libnet-ssleay-perl (>= 1.35) but it is
not going to be installed
I think this has been discussed in ReadyNAS related discussions before.
I'd suggest you
mherger wrote:
> As long as this command fails you have a problem with IO::Socket::SSL
> and don't even need to continue the Spotty research... How did you
> install it?
Putty logged into root of ReadyNAS and used "sudo apt-get install
libio-socket-ssl-perl"
root@ReadyNAS:~# sudo apt-get instal
DavidBulluss wrote:
> root@ReadyNAS:~# perl -MIO::Socket::SSL -e 'print
> $IO::Socket::SSL::VERSION'
> Can't locate IO/Socket/SSL.pm in @INC (@INC contains: /etc/perl
> /usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5
> /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.1
mherger wrote:
>
> I'm confused: have you been able to enter credentials or not?
I believe so, screen appeared with a lot of info and an input for
usename and for password. Was able to enter them but "apply" caused a
new screen with "404 not found etc".
mherger wrote:
> What would the foll
Installed Perl module IO::Socket::SSL and after restart I was able to
enter my username & password in Settings/Advanced/Spotty... error
message on the LMS GUI Advanced screen "404 Not Found:
plugins/Spotty/settings/basic.html"
I'm confused: have you been able to enter credentials or not?
I wen
mherger wrote:
> > I think it is running
> a very old glibc which might still make spotty fail... But I'll try to
> come up with a build which is not depending on glibc, which might make
> it work eventually...
>
>
> I think there are instructions in the other
> thread as to how to do this
I have made a bold assumption that my ReadyNas Duo V2 runs ARMv5.
Correct? If not, read no further!:p
I _hope_ it's correct, as I have the same in the office (but I'm not
there today). But I haven't tested this yet. TBH: I think it is running
a very old glibc which might still make spotty fail
mherger wrote:
> Hi there,
>
> If you've tried to use 'Spotty'
> (http://forums.slimdevices.com/showthread.php?t=107615) on your NAS
> device but failed due to some incompatibility, here's something for you:
> Thanks to forum user jr01 and 'Jörg Krause'
> (https://github.com/joerg-krause/rust-cr
Hi there,
If you've tried to use 'Spotty'
(http://forums.slimdevices.com/showthread.php?t=107615) on your NAS
device but failed due to some incompatibility, here's something for you:
Thanks to forum user jr01 and 'Jörg Krause'
(https://github.com/joerg-krause/rust-cross-libs) I've finally been ab
19 matches
Mail list logo
