Excellent. Thanks Ronnie. That last set of instructions worked. The Main
Mix is playing now and I have saved it to my Favourites.
It's showing that it's a chunk about 20 minutes long. What happens when
it reaches the end? Will it just stop or will it carry on to the next
bit?
Right, go to Squuezebox Server tab on the max2play web gui
Scroll down to Squeezebox Server Start Installation
1)Select Nightly 7.9
2)Check box ends in .deb
3)Start installation
26125
+---+
|Filename: anick.png
OK Nick, this afternoon I download the old Jessie from max2play and
installed it on a rpi2B.
I had to update the package and then had a problem with it downloading
LMS, but eventually got the latest .deb package and installed it
manually.
The terminal print out told me
> dpkg: dependency
Nick_G wrote:
> Thanks Ronnie. I'm using Max2Play version 2.47. I think I updated that
> fairly recently. LMS is version 7.9.0. I don't see any obvious options
> to update LMS.There should be a drop down box on the max2play update page
> where you
can choose the 7.9.2 nightly. The nightly is
Man in a van wrote:
> Nick, have you updated the Max2Play package and also LMS?
>
> Our last contact was a while ago, I think you were using the Max2Play
> Jessie download.
>
> I'll try that out this afternoon, just to load Radio Paradise.
>
> ronnie.
Thanks Ronnie. I'm using Max2Play
Nick, have you updated the Max2Play package and also LMS?
Our last contact was a while ago, I think you were using the Max2Play
Jessie download.
I'll try that out this afternoon, just to load Radio Paradise.
ronnie.
^Thanks Ronnie.
I've done all that in Terminal, didn't get any error messages, but I'm
getting the same message as before, so nothing appears to have changed.
Nick_G's Profile:
Open Terminal and type
Code:
ssh pi@ 192.168.1.xxx
(whatever the IP is) press enter.
for the password type raspberry and press enter (there will be no text
displayed).
Max2play or max2play for the password, again press enter.
When you are
mherger wrote:
> > Thanks. Yes I have the Max2Play homepage.
>
> Then you should be able to run:
>
> sudo apt-get install libio-socket-ssl-perl libnet-ssleay-perl
>
> to get the necessary packages.
>
> --
>
> Michael
Thanks Michael, but you're going to have to give me more detail than
Thanks. Yes I have the Max2Play homepage.
Then you should be able to run:
sudo apt-get install libio-socket-ssl-perl libnet-ssleay-perl
to get the necessary packages.
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
Man in a van wrote:
> Max2Play I think.
>
> Can you type
>
> >
Code:
> > http://max2play
> >
>
> into your browser to bring up the web access gui
>
> I think that's the command
Thanks. Yes I have the Max2Play homepage.
Max2Play I think.
Can you type
Code:
http://max2play
into your browser to bring up the web access gui
I think that's the command
Man in a van's Profile:
Nick_G wrote:
> It's a Pi yes but I don't know if it's picoreplayer.Is it still this one?
https://forums.slimdevices.com/showthread.php?p=809002
Sent from my SM-G900F using Tapatalk
slartibartfast's Profile:
Man in a van wrote:
> Nick, remind me on what your LMS is running , Is it a pi with
> picoreplayer?
It's a Pi yes but I don't know if it's picoreplayer.
Nick_G's Profile:
Nick, remind me on what your LMS is running , Is it a pi with
picoreplayer?
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread:
Thanks guys.
OK it did install as the icon is there in LMS > Home > Apps. However,
when I click on it I got this:
"Radio Paradsie lossless streaming requires the Perl module
IO::Socket::SSL. Please use your operating system's package manager to
install it. "
Erm, as Manuel might say, "¿Que?"
26112
as kidstypike says then click on the heart to add to favourites
hope your well Nick
+---+
|Filename: 1.png|
|Download:
Nick_G wrote:
> Hi all.
>
> I just thought I'd try this plugin and have apparently installed it
> successfully according to the Plugins list on LMS. I put the
> 'radioparadise://4.flac' url in on my Favourites in the Radio stations
> directory, refreshed my Favourites, went to play it and the
Hi all.
I just thought I'd try this plugin and have apparently installed it
successfully according to the Plugins list on LMS. I put the
'radioparadise://4.flac' url in on my Favourites in the Radio stations
directory, refreshed my Favourites, went to play it and the SBT
immediately came up
mherger wrote:
> > Hi Michael, not sure whether I should be directing this to you or
> > Philippe but notwithstanding the above fix, I am still am
> experiencing
> > issues with the Radio Paradise FLAC stream when used in conjunction
> with
> > Philippe's CastBridge and a CCA device. Much the
Hi Michael, not sure whether I should be directing this to you or
Philippe but notwithstanding the above fix, I am still am experiencing
issues with the Radio Paradise FLAC stream when used in conjunction with
Philippe's CastBridge and a CCA device. Much the same as previous posts,
presumably for
mherger wrote:
> > Updated to v2.1.3. Anything we should know?
>
> A minor change to (hopefully) fix streaming to one of philippe's
> clients.
>
> --
>
> Michael
Hi Michael, not sure whether I should be directing this to you or
Philippe but notwithstanding the above fix, I am still am
Could you please try with the buffer settings removed?
MichaelFixed! Michael, as usual, you're a Genius! [emoji16]
Good to know! It's an issue I've been facing with Spotty, too. The
problem is that some actions are being triggered on track changes. And
with huge buffers like yours the player
mherger wrote:
> >> MichaelThat's what I see[image:
> >
> https://uploads.tapatalk-cdn.com/20181113/38bb9521214754b71571ca3b62d17ccc.jpg]
>
> Could you please try with the buffer settings removed?
>
> --
>
> MichaelFixed! Michael, as usual, you're a Genius! [emoji16]
Thx a lot!
MichaelThat's what I see[image:
https://uploads.tapatalk-cdn.com/20181113/38bb9521214754b71571ca3b62d17ccc.jpg]
Could you please try with the buffer settings removed?
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
mherger wrote:
> >> Done. Now the issue is different. It shows the correct image for
> 10sec
> >> and switch to next album cover and text [emoji21]
>
> Did you change Squeezelite's configuration in pCP? Eg. configure huge
> buffers?
>
> --
>
> MichaelThat's what I see[image:
Done. Now the issue is different. It shows the correct image for 10sec
and switch to next album cover and text [emoji21]
Did you change Squeezelite's configuration in pCP? Eg. configure huge
buffers?
--
Michael
___
plugins mailing list
sdiesel77 wrote:
> Done. Now the issue is different. It shows the correct image for 10sec
> and switch to next album cover and text [emoji21]
>
> Is it also normal that most of the options are with ERROR
> selected?[image:
>
If you've heard about the horrible wildfire consuming Paradise today,
you'll be happy to hear that Bill and Rebecca are not in Paradise and
are OK.
It must be a monster. We are choking on smoke way down here in Silicon
Valley, 200 miles / 322 km to the south.
News reports say the whole town
Done. Now the issue is different. It shows the correct image for 10sec
and switch to next album cover and text [emoji21]
sdiesel77's Profile: http://forums.slimdevices.com/member.php?userid=64065
View this thread:
sdiesel77 wrote:
> How do I do that?
>
>
> I just went into the 3rd party plug in list in LMS and ticked the box.
> Anything else I should have done?
Settings/Advanced/Logging then set logging for the plugin to info and
click apply.
Sent from my SM-G900F using Tapatalk
mherger wrote:
> >
> ...Maybe you can enable logging for plugin.radioparadise, then check
> server.log again when this happens?
How do I do that?
mherger wrote:
> >
> And make sure you're running the
> latest of everything (in particular the plugin itself).
> -- Michael
I just went into
Didn't check the web UI
What I meant: is the artwork stuck in the web UI, too?
I restarted multiple times the Pi
Hmm... I've seen JiveLite on pCP get stuck, too. Happens every few weeks
or months. But then it would be totally stuck, not only just for one
station.
Maybe you can enable
mherger wrote:
> > It's showing the Album cover and Artist/Track name as standard but
> then
> > get stuck on one forever. It's the same on the phone via OrangeSqueez
>
> What about the web UI? Are you running JiveLite on the Pi? What if you
> restarted it? Anything in server.log?
>
> --
>
It's showing the Album cover and Artist/Track name as standard but then
get stuck on one forever. It's the same on the phone via OrangeSqueez
What about the web UI? Are you running JiveLite on the Pi? What if you
restarted it? Anything in server.log?
--
Michael
mherger wrote:
> > However, it's all great at the exception of a little issue. After few
> > tracks played, the album cover and the artist name get stuck on the
> > raspberry (Pi3) screen. The music still works ok.
> What is displaying it on the Pi? Would other UIs (web UI, mobile app,
> etc.)
However, it's all great at the exception of a little issue. After few
tracks played, the album cover and the artist name get stuck on the
raspberry (Pi3) screen. The music still works ok.
What is displaying it on the Pi? Would other UIs (web UI, mobile app,
etc.) display correct artwork?
--
Thx Michael, that was indeed a file type issue, I can now play Radio
Paradise in flac :)
However, it's all great at the exception of a little issue. After few
tracks played, the album cover and the artist name get stuck on the
raspberry (Pi3) screen. The music still works ok.
Any idea how to
Hi Guys, I must have done something incorrectly but I just installed the
Radio Paradise plugin from LMS and when I'm trying to play it I get this
error message.
My LMS version is 7.9.1[image:
https://uploads.tapatalk-cdn.com/20181103/192ec3918d60b5ae1f7a83d36ed94c30.jpg]
Can your player play
Hi Guys, I must have done something incorrectly but I just installed the
Radio Paradise plugin from LMS and when I'm trying to play it I get this
error message.
My LMS version is 7.9.1[image:
https://uploads.tapatalk-cdn.com/20181103/192ec3918d60b5ae1f7a83d36ed94c30.jpg]
philsparks wrote:
> sorry, I didn't make it clear, that's exactly what I have. I bought the
> RPi-3 solely to see if I could get Flac Paradise working. It's better
> than with WHS but still not right. I'd be surprised if it's the
> internet connectivity as everything else (Netflix,
Furry wrote:
> Maybe try running piCorePlayer on the RPi, using LMS on that?
sorry, I didn't make it clear, that's exactly what I have. I bought the
RPi-3 solely to see if I could get Flac Paradise working. It's better
than with WHS but still not right. I'd be surprised if it's the
internet
philsparks wrote:
> I shifted LMS to run on a RPi-3, latest version etc
Maybe try running piCorePlayer on the RPi, using LMS on that?
Living room: SB Touch, with coax to: Marantz PM7005, TDL RTL3 speakers.
Dining room: SB Boom.
Kitchen: SB Radio 1/4 with battery.
Bedroom 1: SB Radio 2/4 no
I shifted LMS to run on a RPi-3, latest version etc and uninstalled it
from the WHS. There are definitely less jumps and restarts, but I do
still get them every few songs, sometimes less often (say 10 songs) but
it hasn't gone away totally. It's a fully wired network with decent
200mb/s
Furry wrote:
> I have changed LMS from Windows to the piCorePlayer's LMS on RPi3, and
> using the piCorePlayer instead of Touch, and now I don't have the
> skipping/interrupting problems on RP anymore.
>
> I can also sync a Radio to the piCorePlayer with no problems.
>
> All are operating on
philsparks wrote:
> As before I have LMS sitting on a R Pi 3, a couple of RPi players and a
> Touch too. I get the jumps with all 3 players.
I have changed LMS from Windows to the piCorePlayer's LMS on RPi3, and
using the piCorePlayer instead of Touch, and now I don't have the
philsparks wrote:
> Hi - I also have the same issue, even with LMS (latest version) running
> on a RPi. There should be a log attached and I just had a random
> restart. It was 15:52 and something was playing (sorry can't remember
> what) and it stopped half way through, there was then a
I am using the FLAC stream (radioparadise://4.flac).
Ok, I can confirm that PSD is somehow defunct. But you can hit FWD
instead to skip to the next track in the stream?
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
Thanks and sorry for the delay in responding!
Please see attached log file.
I am using the FLAC stream (radioparadise://4.flac).
mherger wrote:
> > In the log I see:
>
> Could you please set logging for plugin.radioparadise to DEBUG, then try
>
> again and upload the full server.log.zip?
>
Furry wrote:
> Even with piCorePlayer LMS:
>
> There are, every so often, bouts of rebuffering.
>
> Also, playback just stops for a while, with no 'rebuffering' message
> shown - although this may follow a recent rebuffer.
>
> I just had this sort of discontinuity followed by a Bill
Even with piCorePlayer:
There are, every so often, bouts of rebuffering.
Also, playback just stops for a while, with no 'rebuffering' message
shown - although this may follow a recent rebuffer.
I just had this sort of discontinuity followed by a Bill interruption.
And, Bill's interruptions
mherger wrote:
> There seems to be a
> problem with Windows :-(
Unfortunately, it is now skipping with the piCorePlayer / pCP LMS, and I
think I heard a Bill interruption too. Though both seem to be less
often...
Living room: SB Touch, with coax to: Marantz PM7005, TDL RTL3 speakers.
Yes, I believe so; v2.2.1.
That's fine. And your LMS is on Windows, too? There seems to be a
problem with Windows :-(
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
Just tried pausing after reading your comment and the player stops
rather than pauses. Is that the expected behaviour?
Yes. As I outlined above we cannot pause and resume. Otherwise you'd see
those interrupted streams.
--
Michael
___
plugins
mherger wrote:
> Are you running the latest RP version?
Yes, I believe so; v2.2.1.
Although the piCorePlayer had been 'off' (whatever that amounts to),
rather than paused.
Living room: SB Touch, with coax to: Marantz PM7005, TDL RTL3 speakers.
Dining room: SB Boom.
Kitchen: SB Radio 1/4
mherger wrote:
> >
>
> I thought I had disabled pausing in the latest version.
>
> --
>
> Michael
Just tried pausing after reading your comment and the player stops
rather than pauses. Is that the expected behaviour?
Sent from my SM-G900F using Tapatalk
Just turned on piCorePlayer after a period of being off, and started RP
Main Mix.
It started 10 tracks 'behind' the current track playing on RP's web
player.
Are you running the latest RP version? There's an issue if you pause a
stream. The player would then try to resume, which would leave
slartibartfast wrote:
> Windows servers do seem to have a few issues.
I'm thinking I might just use the piCorePlayer LMS on RPi instead, and
put my music library on a large-ish USB flash plugged directly into
that.
And also use the piCorePlayer (on the same RPi) instead of the Touch; I
have
Just turned on piCorePlayer after a period of being off, and started RP
Main Mix.
It started 10 tracks 'behind' the current track playing on RP's web
player.
After completing that track, it moved on to the next track in the
sequence, i.e. about 9 tracks behind the web player
Living room: SB
The piCorePlayer setup seems at least a lot less likely to skip, perhaps
not skipping at all (though I have yet to prove this to myself); the
problem seems to afflict the Windows server.
Thanks for this thorough analysis. I fear I'll have to do more work on
Windows...
--
Michael
Furry wrote:
> I set up two LMS servers, one on Windows the other on piCorePlayer
> (RPi), and set a player on each (Radio and piCorePlayer respectively) to
> play the RP Main flac stream.
>
> Obviously, they weren't synchronised, but they did play the same tracks
> for a while, until one
I set up two LMS servers, one on Windows the other on piCorePlayer
(RPi), and set a player on each (Radio and piCorePlayer respectively) to
play the RP Main flac stream.
Obviously, they weren't synchronised, but they did play the same tracks
for a while, until one player (Radio) 'skipped', to a
In the log I see:
Could you please set logging for plugin.radioparadise to DEBUG, then try
again and upload the full server.log.zip?
Which stream are you using?
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
Hi,
For the last few days (weeks?) I've not been able to get the PSD button
to work. It just reads:
"Failed to play something different..."
In the log I see:
Code:
[18-09-11 21:01:31.2664]
Plugins::RadioParadise::Plugin::_playSomethingDifferentSuccess (336) (
kidstypike wrote:
> Radio Paradise flac streams not working a few hours ago, now working. :)So
> they are. Thanks for the heads up.
Sent from my SM-G900F using Tapatalk
slartibartfast's Profile:
slartibartfast wrote:
> Same here. FLAC streams are still working on the Radio Paradise website
> but not in LMS.
>
> Sent from my SM-G900F using Tapatalk
Radio Paradise flac streams not working a few hours ago, now working. :)
*Study/Server - LMS 7.9.2 -* Pi3B+/pCP 4.0.0-b5/pi
scooterplooker wrote:
> All 4 Radio Paradise FLAC streams stopped working suddenly last night,
> other Radio Paradise streams work fine. When trying to connect message
> displayed is: Problem: Can't connect to server for: Main Mix (FLAC).
> Appears to be something at the Radio Paradise end.
All 4 Radio Paradise FLAC streams stopped working suddenly last night,
other Radio Paradise streams work fine. When trying to connect message
displayed is: Problem: Can't connect to server for: Main Mix (FLAC).
Appears to be something at the Radio Paradise end. FLAC streams have
worked
With my system the flac stream stopped working today.
After a server restart the log shows
Code:
[18-09-10 22:44:53.5116] main::init (387) Starting Logitech Media Server
(v7.9.2, 1533559127, Mon Aug 6 15:11:56 CEST 2018) perl 5.018002 -
darwin-thread-multi-2level
To add to the thread i also have problems with a stuttering connection
and drops in the music feed this has been happening for the last week or
so until today when i choose to select the flac option from within the
LMS radio paradise plug in and i get no music .Although the 320 kbps
feed works
Furry wrote:
> Just uploaded a later version of the log.
>
> Interruptions occurred today at 15:31:57, 15:37:45, 15:42:50 (-ish,
> plus/minus a second or two).
>
> The first two were 'Bill' interruptions, not sure about the third.
>
> Each of these interruptions apparently occurred at about
Furry wrote:
> I've just installed the "17 Apr" (the Last Modified date), but LMS
> Settings/Information reports it as 7.9.1 - 1522157629 @ Fri Mar 30
> 12:17:59 WEDT 2018.
>
> Eh?
Just to chime in here. I have exactly the same issue.
I used to use a WHS-2011 server with LMS installed on
Furry wrote:
> I'm using 7.9.1 - 1522249619 @ Wed Mar 28 17:08:48 WEDT 2018. This is
> the latest that automatic updates and downloads has required me to
> install.
>
> I notice that there's a later 7.9.1, from 17 Apr (why would LMS not have
> had me install this?), and a 7.9.2 beta.
I've
mherger wrote:
> > And another log (..._2), a bit longer.
> >
> > 09:56:59.7628 of interest?
>
> Hmm... that's interesting, but unlikely the cause for Bill chiming in
> randomly. A comment in the code mentions that the "queue too long" can
> happen when there's a very short track. Bill's
And another log (..._2), a bit longer.
09:56:59.7628 of interest?
Hmm... that's interesting, but unlikely the cause for Bill chiming in
randomly. A comment in the code mentions that the "queue too long" can
happen when there's a very short track. Bill's announcement could
potentially be
And another log (..._2), a bit longer.
09:56:59.7628 of interest?
Living room: SB Touch, with coax to: Marantz PM7005, TDL RTL3 speakers.
Dining room: SB Boom.
Kitchen: SB Radio 1/4 with battery.
Bedroom 1: SB Radio 2/4 no battery, SB Radio 3/4 with battery.
Bedroom 2: SB3 1/2, AE 2.1.
Just submitted another log, with player.source=INFO enabled.
I have only included today's log. A bunch of possibly interesting stuff
was generated at 09:40, when a skip occurred, then nothing more was
logged for sometime after that.
Living room: SB Touch, with coax to: Marantz PM7005, TDL
mherger wrote:
> What kind of player are you using in this case? Are you syncing players?
> Any 3rd party software involved?
Usually a Touch, but also Radios. The Touch has EDO; no other 3rd party
software being used. I get the problem on any/all players, whether
synced or not.
mherger
Just uploaded a later version of the log.
Interruptions occurred at 15:31:57, 15:37:45, 15:42:50 (-ish, plus/minus
a second or two).
Thanks. Not sure what is going on there: out of the blue LMS seems to
ask the plugin for the next track. This should only happen when it's
assuming all audio
Just uploaded a later version of the log.
Interruptions occurred at 15:31:57, 15:37:45, 15:42:50 (-ish, plus/minus
a second or two).
The first two were 'Bill' interruptions.
Each of these interruptions apparently occurred at about the time of
"Fetching new block of events".
Living room: SB
Furry wrote:
> New log submitted.
>
> I don't know the seconds, but a next track interrupted a playing track
> sometime during 11:21.
>
> Typically, this particular problem hasn't happened so much today, but
> there has been a lot of rebuffering.
Strangely, both of the AAC main mix streams
Furry wrote:
> No, but debug logging is still enabled, so I'll note the time (hh:mm:ss)
> when another one happens, and send the log again.
New log submitted.
I don't know the seconds, but a next track interrupted a playing track
sometime during 11:21.
Living room: SB Touch, with coax to:
mherger wrote:
> > Done that.
>
> Do you remember when exactly the hiccup happened?
>
> --
>
> Michael
No, but debug logging is still enabled, so I'll note the time (hh:mm:ss)
when another one happens, and send the log again.
Living room: SB Touch, with coax to: Marantz PM7005, TDL RTL3
Done that.
Do you remember when exactly the hiccup happened?
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
mherger wrote:
> > Not pausing; it happens at random times.
>
> Could you please enable debug logging for plugin.radioparadise, then
> upload your server.log.zip to
> https://www.dropbox.com/request/T3RctyzGgNg0oFDubq6a once it has
> happened again?
>
> --
>
> Michael
Done that.
Not pausing; it happens at random times.
Could you please enable debug logging for plugin.radioparadise, then
upload your server.log.zip to
https://www.dropbox.com/request/T3RctyzGgNg0oFDubq6a once it has
happened again?
--
Michael
___
plugins
After a LMS restart, Radio Paradise is working well again.
lalu01's Profile: http://forums.slimdevices.com/member.php?userid=30852
View this thread: http://forums.slimdevices.com/showthread.php?t=108189
mherger wrote:
> Do you Pause the stream sometimes, trying to resume later? Or is this
> happening after any random time of listening to the stream?
Not pausing; it happens at random times.
I have also tried another instance of LMS (same versions) on a different
(Windows 2012R2) server box,
Still 'skipping'; sometimes the track abruptly changes during, other
times Bill's announcements occur while a track is playing, followed by
next track.
Sorry to report that this is still occurring, also on the various other
mixes as well as main (have just updated plugin).
Do you Pause the
All mixes play smooth as silk here. Also smooth as Bill's voice in those
announcements.
LMS: SGC microJukebox Players: Duet, Touch (two), ultraRendu, Mac
SqueezePlay, Win Squeezelite-X Control apps: Android Squeezer, Win
Squeezelite-X
mherger wrote:
> > Still 'skipping'; sometimes the track abruptly changes during, other
> > times Bill's announcements occur while a track is playing, followed by
> > next track.
Sorry to report that this is still occurring, also on the various other
mixes as well as main (have just updated
Radio Paradise just gets better and better; I am glad I have made a few
donations to them. Thanks to Bill and Michael for making this avaialble
Logitech Media Server Version: 7.9.1 - 1518987734 @ Sun Feb 18 22:55:43
CET 2018
Operating system: Debian - EN - utf8 Platform
Using Airplay Bridge so player can't play flac natively that's why it
tries to convert it. My thinking is now that it might be an error with
that plugin and not this one...
I'd suggest you head over to Philippe's thread. He might already know
the answer.
--
Michael
mherger wrote:
> Can you squeezelite instance play flac natively? LMS seems to try to
> transcode flac to something your player can play and fails.
Using Airplay Bridge so player can't play flac natively that's why it
tries to convert it. My thinking is now that it might be an error with
that
mherger wrote:
> > Mellow
> > Rock
> > Groovy
> > Main
>
> FLAC streams are now available in v2.2.0.
>
> --
>
> Michael
Thank you so much!
Mike
mboxler's Profile:
Can you squeezelite instance play flac natively? LMS seems to try to
transcode flac to something your player can play and fails.
Michael
http://www.herger.net/slim-plugins - Spotty, MusicArtistInfo
mherger's Profile:
Hi,
I have tried to search this thread and others but couldn't find any
solution for my problem. I just installed the Radio Paradise plugin and
tried to play "Main Mix". It works when playing on my Squeezebox Boom,
but not when trying to play one any of my Squeezelite players.
Best regards
Mellow
Rock
Groovy
Main
FLAC streams are now available in v2.2.0.
--
Michael
___
plugins mailing list
plugins@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/plugins
Mellow
Rock
Groovy
Main
Now listening to the Mellow Mix (Sara, Fleetwood Mac). Awesome sounding
FLAC stream.
Anyway of incorporating this into the RP Plugin?
I don't know. I reached out to Bill. We'll have to wait for his response
to see whether it's feasible at all.
--
Michael
Although this was requested in a separate thread, perhaps it would
better to ask here. With the new RP web player, one can request 1 of 4
mixes...
Mellow
Rock
Groovy
Main
Now listening to the Mellow Mix (Sara, Fleetwood Mac). Awesome sounding
FLAC stream.
Anyway of incorporating this into
801 - 900 of 1335 matches
Mail list logo
