Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > At the risk of being redundant... > > Running with the Zone 2 LMS player output level set to 100% does not > mean that you lose the ability to set the Zone 2 AVR volume from your > LMS client app. And it has absolutely no effect on your main zone > settings. On the contrary, it will allow you to do EXACTLY what you are > trying to do. Just set the Zone 2 player output level to 100% in LMS, > define your Zone 2 Quick Select to set the initial Zone 2 preamp volume > when it is powered on, and use your client app from wherever you are, > whether it's on the porch, at the neighbor's house, or anywhere else in > range of your wifi router, to control every aspect of the player, > including the volume. It's a no-brainer, and is the way the plugin was > meant to work. I am still waiting for someone to present me with a valid > scenario that would require, or even make sense for, running the plugin > with variable LMS player output. I'm starting to understand why Peter's > Denon plugin requires that it to be set to 100% or it won't even start > up. I blame much of the confusion regarding this issue on the wording of > the LMS player menu option description, which is unclear and prone to > misinterpretation. Anyway, give it a try and keep enjoying your > Squeezebox experience. What if I am using only one LMS player feeding to both Z1 & Z2 of the amp? Both zones are receiving the same signal simultaneously. I will have a play with it all as suggested. Cheers, David *Server*rpi3 pCP7.0.1 LMS8.1.2 *Media*USB hard drive *Lounge/dining areas*SBT > Denon AVR2113 > Bose Acoustimass10 / Krix Seismix3 18" 300w RMS custom cinema sub (& AR 77XB t/table, Stanton 680MkII / Grado F-1+ > NAD7155 to phono pre-amp > Amp+) *Family/kitchen*SBT > Denon AVRX3000 zone 1 > Krix Acoustix F, Centrix C, Holographix R & Original Seismix 7 15" 400w RMS sub *Alfresco*as above zone 2 > Krix Tropix *Others*SB Player/androids > Bose Soundlink Mini *SBT/SB Player Remotes* Squeeze Ctrl/androids DavidBulluss's Profile: http://forums.slimdevices.com/member.php?userid=60056 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > Yes, I understand that logic, but for may set-up the missing part of the > puzzle is that I sometimes run Z1 on the same amp I am running Z2 and I > always set Z1 manually (it has the main household TV etc. running > through it and source gets changed unpredictably by grand kids, spouse > etc.) so I set it manually depending on the mood at a volume and adjust > music vol using LMS. Hence keeping LMS variable suits. > > Cheers, David At the risk of being redundant... Running with the Zone 2 LMS player output level set to 100% does not mean that you lose the ability to set the Zone 2 AVR volume from your LMS client app. And it has absolutely no effect on your main zone settings. On the contrary, it will allow you to do EXACTLY what you are trying to do. Just set the Zone 2 player output level to 100% in LMS, define your Zone 2 Quick Select to set the initial Zone 2 preamp volume when it is powered on, and use your client app from wherever you are, whether it's on the porch, at the neighbor's house, or anywhere else in range of your wifi router, to control every aspect of the player, including the volume. It's a no-brainer, and is the way the plugin was meant to work. I am still waiting for someone to present me with a valid scenario that would require, or even make sense for, running the plugin with variable LMS player output. I'm starting to understand why Peter's Denon plugin requires that it to be set to 100% or it won't even start up. I blame much of the confusion regarding this issue on the wording of the LMS player menu option description, which is unclear and prone to misinterpretation. Anyway, give it a try and keep enjoying your Squeezebox experience. Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] is there a Twitch Plugin?
Rasputin_GY wrote: > > But there are ways to achieve this, so I share one workaround on this: > Beautiful - this is exactly the level of hackery I was hoping for. I'll try it this weekend =) gdhgdh's Profile: http://forums.slimdevices.com/member.php?userid=62957 View this thread: http://forums.slimdevices.com/showthread.php?t=113995 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Music & Artist Information plugin
Hi, in ways I don't understand MAI keeps downloading pics of artists that I have no picture of. I don't know why it does that and I don't know where these pics are saved either. How can I disable this function? I am aware of the path pointing to the storage location and I have checked but this is not where the files are saved. dsm 6.2.2 (synology disk station 115) running lms 8.0 -- rpi with a hifiberry dac+ running picoreplayer (any old version?) -- plugins: material skin, mai, podcasts, musik - folge mir, squeezelite-x, squeeze ctrl streifenleopard's Profile: http://forums.slimdevices.com/member.php?userid=42019 View this thread: http://forums.slimdevices.com/showthread.php?t=99537 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > Lol!!! I wish I could forget them. > Seriously I'm happy that things are working the way you want, Patrick. > It might be my imagination but I think that your English is improving > too! Thank. Did not noticed the improvement, but thank for the compliment. Sure due to the plugin improvement - Patrick madpatrick's Profile: http://forums.slimdevices.com/member.php?userid=4929 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
madpatrick wrote: > I'm using on my Denon not the dB scale, but the 0-98 scale. > So the 27 is then i think 27% and -53db ? > > I understand the 100% fixed outpout, but somhow i want also control the > volume a little bit with LMS. > Therefor i try to achieve a level of 80% of LMS to tweak the volume a > little bit remotly. If i want to get volume very high i will walk to > the Amp to control the volume. > > My question is maybe not clear explained by me. > The question was if it is possible to change the maximum volume field in > to % instead of the dB scale ? > This will not change the functionality of the setting, but makes it > easier to setup or control. Maybe not so easy to change :rolleyes: > > Again, i appreciate your effort for this plugin very much ! So under the covers the Denon is using a 0-99 scale too. But this setting in the plugin tells us how far up that scale we can go. For example if you selected 0 as your maximum then the Denon will reject any volume command smaller (more volume). Here is the scale: :00 to 99 , 80=0dB, 99=---(MIN) So the settings in the plugin does not change anything in the Denon or LMS player, it just lets us know how big of a volume your Denon is willing to accept. So we use this to set the range of the LMS player so 100% of the player equals the largest level your Denon will accept. You can actually enter a lower value than what you set in the Denon and we would therefore never reach that level of volume. But if you went the other way then any level in the LMS player that would exceed the Denon's setting would be rejected. In essence that would mean a great deal of the range of your LMS players volume adjustment would not be used and the rest would cause a larger change than is ideal. Anyway a bit confusing, but the good news is that once you figure out the formula you only need to enter it one time, unless you change this value on your Denon. Originally I did not think there was a way to ask the Denon for this setting as there are no commands to do so. But in preparing for the 4.2 ability to adjust the channel volumes it turns out the Denon gives me back this setting as a bonus. So it is highly probable I will be removing this setting in the plugin in the future. Stand by. Chris Aesculus's Profile: http://forums.slimdevices.com/member.php?userid=14876 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
madpatrick wrote: > Now i understand it. > Changed the setting to fixed 100% and by the volume changing in LMS the > AVR volume is changing > Great, that it did not see this earlier. Forget my previous posts > Lol!!! I wish I could forget them. Seriously I'm happy that things are working the way you want, Patrick. It might be my imagination but I think that your English is improving too! Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
cpd73 wrote: > As they are signed with different keys you cannot update one from the > other. I don't recall how I installed it originally. Still, I just uninstalled it with F-Droid, and reinstalled it, and it's still 0.1.4. Never mind, for now at least. LMS 8.1 on PC, Xubuntu 20.04, FLACs 16->24 bit, 44.1->192kbps. 2 Touches & EDO. LMS plugin UPnP/DLNA Bridge to MF M1 CLiC (A308CR amp & ESLs) & Marantz CR603 UPnP renderers. Also Minimserver & Upplay to same & to upmpdcli/mpd PC renderers. Squeezelite to Meridian USB Explorer DAC to PC speakers/headphones. Wireless Xubuntu 20.04 laptop firefox/upplay or Android mobile with Squeeze-Ctrl/BubbleUPnP controls LMS/Minimserver. PasTim's Profile: http://forums.slimdevices.com/member.php?userid=41642 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > This is where I feel that you and others have a misunderstanding of what > happens when you use the 100% fixed output level player audio setting. > With this setting, you have full control of the AVR volume using > whatever LMS client app you use, from 'mute' up to the maximum level you > specify in the plugin settings menu. There is no downside to doing this. > Please try it and then tell me what problems, if any, it causes for you > -- not 'in theory' but actual problems. > > If you set the output level to fixed at 100%, you will never have to > walk to the amp again! ;-) Now i understand it. Changed the setting to fixed 100% and by the volume changing in LMS the AVR volume is changing Great, that it did not see this earlier. Forget my previous posts - Patrick madpatrick's Profile: http://forums.slimdevices.com/member.php?userid=4929 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
Jaca wrote: > I also had this problem before when LMS apk was originally installed > from GitHub, F-Droid won't show any updates.. Unistalling and installing > from F-Droid solved it.. As they are signed with different keys you cannot update one from the other. *Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json (Use http: //SERVER:9000/material/?debug=json,cometd to also see update messages, e.g. play queue) 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here. cpd73's Profile: http://forums.slimdevices.com/member.php?userid=66686 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > I originally had the version from GitHub and actually uninstalled that > and reinstalled from F-Droid to make sure it was definitely there. It > claims to have been there for 4 days now. Very strange. I will see what > happens when the next update arrives although they are few and far > between for the APK. > > Sent from my Pixel 3a using TapatalkI also had this problem before when LMS > apk was originally installed from GitHub, F-Droid won't show any updates.. Unistalling and installing from F-Droid solved it.. 3x Squeezebox Touch, 4x Squeezebox Radio, Squeezelite (RPi 3B with HiFiBerry DAC+Pro on OSMC), Material Skin Apk, Squeeze Commander, Logitech Media Server Version: 8.2.0 with Material Skin (Docker in DS218+) Jaca's Profile: http://forums.slimdevices.com/member.php?userid=58187 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
DavidBulluss wrote: > That idea I really like! Again, maybe peculiar to my system is that Z2 > is outside and quite a distance from the amp, and as such the remote > doesn't work when outside. Yes, I know, set it before you go outside, > but I usually turn the LMS on with Z2 when already outside. > > I will give the 4.1 beta a run :-) > > Cheers, David Hi David. I have a request for you. After you install the 4.1 beta, set the 'Player->Audio-Volume Control' to fixed at 100% for your Zone 2 player and do some testing with your client app of all the scenarios that you are concerned about. After that, come back here and report what specific problems you encounter. I am seeing too many theoretical objections to using 100% fixed output based on misconceptions about what it does. We need to get back to solving real-world problems on this forum and not hypothetical ones. Thanks for your past cooperation and support in beta testing. Your input is appreciated. Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
madpatrick wrote: > > I understand the 100% fixed outpout, but somhow i want also control the > volume a little bit with LMS. This is where I feel that you and others have a misunderstanding of what happens when you use the 100% fixed output level player audio setting. With this setting, you have full control of the AVR volume using whatever LMS client app you use, from 'mute' up to the maximum level you specify in the plugin settings menu. There is no downside to doing this. Please try it and then tell me what problems, if any, it causes for you -- not 'in theory' but actual problems. > Therefor i try to achieve a level of 80% of LMS to tweak the volume a > little bit remotly. If i want to get volume very high i will walk to > the Amp to control the volume. > If you set the output level to fixed at 100%, you will never have to walk to the amp again! ;-) Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
TBoneCO wrote: > My 3808 was falling off the network for years, so stopped using this > plugin and coincidentally stopped listening to Squeezebox except special > occasions. Replaced WiFi router (my main router) and low and behold my > Denon is on the network and stable. Started using plugin with iPeng and > what a joy. Thank you! > > Question as I searched forum for 30 min and didnt see similar > situation. I have Denon connected to a single Squeezebox player but > using main for family room and zone2 for deck. So I have plugin > controlling main. But sometimes I go on deck in the morning and prefer > to start streaming out there but keep main zone off. Any way to have > plugin support this without connecting another Squeezebox player to > Denon. Now that's an interesting and sensible question -- a rare occurrence here as of late. ;-) I can see the usefulness of being able to do what you are asking and, in theory, it should be possible to implement it by supporting changing the AVR zone in the plugin on the fly, possibly through the DenonAvpAvrControl settings menu that is supported by clients such as Squeezer, SqueezeCtrl and iPeng. Of course, only one zone could be actively under control of the plugin at a time and switching from one to another would require some thought about issues such as whether to power off the old zone before switching, etc. Overall, I like the idea and will talk to Chris about adding it to the list of future enhancements. Thanks for the feedback. I'm glad you are enjoying the plugin. Sam SamY's Profile: http://forums.slimdevices.com/member.php?userid=63495 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
PasTim wrote: > Strange. I live in the same county, but F-Droid still shows version > 0.1.4 (Android 10). I'm in no rush at all, but it seems a bit strange.I > originally had the version from GitHub and actually uninstalled that and reinstalled from F-Droid to make sure it was definitely there. It claims to have been there for 4 days now. Very strange. I will see what happens when the next update arrives although they are few and far between for the APK. Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > Should be.[image: > https://uploads.tapatalk-cdn.com/20210518/d2aa872ff21b21c79426e5510922059f.jpg] > > Sent from my Pixel 3a using Tapatalk Strange. I live in the same county, but F-Droid still shows version 0.1.4 (Android 10). I'm in no rush at all, but it seems a bit strange. LMS 8.1 on PC, Xubuntu 20.04, FLACs 16->24 bit, 44.1->192kbps. 2 Touches & EDO. LMS plugin UPnP/DLNA Bridge to MF M1 CLiC (A308CR amp & ESLs) & Marantz CR603 UPnP renderers. Also Minimserver & Upplay to same & to upmpdcli/mpd PC renderers. Squeezelite to Meridian USB Explorer DAC to PC speakers/headphones. Wireless Xubuntu 20.04 laptop firefox/upplay or Android mobile with Squeeze-Ctrl/BubbleUPnP controls LMS/Minimserver. PasTim's Profile: http://forums.slimdevices.com/member.php?userid=41642 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
My 3808 was falling off the network for years, so stopped using this plugin and coincidentally stopped listening to Squeezebox except special occasions. Replaced WiFi router (my main router) and low and behold my Denon is on the network and stable. Started using plugin with iPeng and what a joy. Thank you! Question as I searched forum for 30 min and didnt see similar situation. I have Denon connected to a single Squeezebox player but using main for family room and zone2 for deck. So I have plugin controlling main. But sometimes I go on deck in the morning and prefer to start streaming out there but keep main zone off. Any way to have plugin support this without connecting another Squeezebox player to Denon. TBoneCO's Profile: http://forums.slimdevices.com/member.php?userid=71788 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Mixcloud plugin?
radish112 wrote: > 505, > > Using Mixcloud v0.6.4, I just happily listened to an uninterrupted 2-hr. > segment on Mixcloud. Thanks! > > Logitech Media Server Version: 8.1.2 > Raspberry Pi4B /4GB > PiCorePlayer v4.0.0 It works also on my same system (only difference is piCorePlayer 7). Thanks LMS 8.1 on rpi 4, picoreplayer georgew's Profile: http://forums.slimdevices.com/member.php?userid=71723 View this thread: http://forums.slimdevices.com/showthread.php?t=88286 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
madpatrick wrote: > I'm using on my Denon not the dB scale, but the 0-98 scale. > So the 27 is then i think 27% and -53db ? > > I understand the 100% fixed outpout, but somhow i want also control the > volume a little bit with LMS. > Therefor i try to achieve a level of 80% of LMS to tweak the volume a > little bit remotly. If i want to get volume very high i will walk to > the Amp to control the volume. > > My question is maybe not clear explained by me. > The question was if it is possible to change the maximum volume field in > to % instead of the dB scale ? > This will not change the functionality of the setting, but makes it > easier to setup or control. Maybe not so easy to change :rolleyes: > > Again, i appreciate your effort for this plugin very much ! (Eternal caveat: I've never used the Denon AVP Control plugin, having written my own back when I used direct RS232 control.) Max volume: my plugin asks about a max Denon volume in dB. My expectation is that you'd set that to match the volume limit set on the amp. I forget where it is in the Denon setup screens, but you can set the max volume to one of a few specific values, ranging from -20 dB to +18 dB. The minimum volume is -81 dB. When you change the Squeezebox volume, my plugin calculates the nearest half-decibel (or, for secondary zones, full decibel since half decibels AFAICT are not availble except in the main zone). Set the SB volume to "27" with my plugin thinking +18 is the max volume and plugin calculates the amp volume should be (-81 + ((27/100)*(81 +18))) = -54 dB. If my plugin thought the amp max volume was 0 dB, then SB 27 would be Denon -59 dB. You might be able to do something like what you suggest by configuring the amplifier to allow +18 but telling my plugin its max volume is 0 dB, so that LMS would never set the Denon above 0 dB but you could turn the amp knob or use a Denon remote to go louder. But there are some conditions under which my plugin will resync the volume (for instance, if set to poll the amplifier, when it sees the amp power status change from off to on, it will set the amp volume to match the Squeezebox [because any volume commands attempted while the amp was off would have been rejected**), and if you had manually increased the amp volume above 0 dB, my plugin would decrease the amp volume back to 0 dB in those scenarios. Also decreasing the Squeezebox volume by even 1 of the 100 steps when the amp was set signficantly higher than 0 dB would lead to a significant drop in the Denon volume. So I would not recommend that. Also my plugin refuses to control an AVR unless the Squeezebox audio output is fixed at 100%. On my setup, I have a modfied version of Michael Herger's MusicInfoScr set to display volume on my SB3 in terms of Denon dBs instead of SB 0-100. My whole family is now quite comfortable thinking in decibels. ;-) That will only work right if my plugin knows the actual amp max volume, as it translates the fictional Squeezebox volume into what it thinks the amp volume should be; if the amp allows volume +18 dB but my plugin thinks it maxes out at 0 dB, then it would show 0 dB on the SB screen for everything from 0 dB to +18 dB. ** FWIW Yamaha's YNCA TCP protocol also rejects things like volume changes when the AVR is in standby. owner of the stuff at https://tuxreborn.netlify.app/ (which used to reside at www.tux.org/~peterw/) Note: The best way to reach me is email or PM, as I don't spend much time on the forums. *Free plugins:* AllQuiet Auto Dim/AutoDisplay BlankSaver ContextMenu DenonSerial FuzzyTime KidsPlay KitchenTimer PlayLog PowerCenter/BottleRocket SaverSwitcher SettingsManager SleepFade StatusFirst SyncOptions VolumeLock peterw's Profile: http://forums.slimdevices.com/member.php?userid=2107 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Ratings Light
mherger wrote: > > Anyway, since it only affects the -post-scan refresh- I'll try a > > workaround and add a dedicated post-scan function that calls the > refresh > > function unless it's been done in the last 30 seconds or so. > > What I sometimes do in such situations is to > Slim::Utils::Timers::setTimer(), and first thing the handler would do > _before_ setting the timer, is to kill any current timer for the > respective function. That would make sure we only run once in the given > > delay. It's a different approach. What I had in mind was: do post-scan refresh unless post-scan refresh already happened in the last 30 seconds. Users can see the results of the refresh/import very quickly and won't get confused or think the ratings import failed. ('code' (https://github.com/AF-1/lms-ratingslight/blob/main/RatingsLight/Plugin.pm#L1259)) I like the timer solution because it's safe: however many calls happen within any subsequent 30 secs window it will only take the last one. Only downside is the final delay of 30 seconds + execution time before the refresh results are available to the users. Hard to choose. afriend's Profile: http://forums.slimdevices.com/member.php?userid=39306 View this thread: http://forums.slimdevices.com/showthread.php?t=113344 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
mherger wrote: > Would you have the refresh implemented if the data requested it? Material already marks parts of its 'history' as needing to be refreshed. e.g. if a user was looking at the contents of a playlist, and the queue was saved as a playlist, when navigating back out of the playlist the list of playlists is refreshed (so that the newly saved playlist is shown). So, code is there to handle it, I'd just need to know that pressing item X in a list will imply the list itself needs to be refreshed when reloaded (i.e. go back). *Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json (Use http: //SERVER:9000/material/?debug=json,cometd to also see update messages, e.g. play queue) 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here. cpd73's Profile: http://forums.slimdevices.com/member.php?userid=66686 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: Well it doesn't update in the default skin either unless you click "search". There is no "back" function in default skin, just in the browser. What do other control points do? e.g. iPeng, Squeezer, SqueezeCtrl, SB Radio? As I mentioned a few postings up, this indeed is broken in Spotty (or rather: not implemented). There's no refresh. Would you have the refresh implemented if the data requested it? ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > Well it doesn't update in the default skin either unless you click > "search". There is no "back" function in default skin, just in the > browser. What do other control points do? e.g. iPeng, Squeezer, SqueezeCtrl, SB Radio? *Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json (Use http: //SERVER:9000/material/?debug=json,cometd to also see update messages, e.g. play queue) 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here. cpd73's Profile: http://forums.slimdevices.com/member.php?userid=66686 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
cpd73 wrote: > Thanks, that seems to have everything. Unfortunately, I see nothing that > tells me the list should be refreshed on going back :( I could add a > hack where if the command is "spotty items item_id:1.0 search:" that > it refreshes on back, but that would be fragile and spotty specific. > HmmWell it doesn't update in the default skin either unless you click "search". There is no "back" function in default skin, just in the browser. Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Ratings Light
Anyway, since it only affects the -post-scan refresh- I'll try a workaround and add a dedicated post-scan function that calls the refresh function unless it's been done in the last 30 seconds or so. What I sometimes do in such situations is to Slim::Utils::Timers::setTimer(), and first thing the handler would do _before_ setting the timer, is to kill any current timer for the respective function. That would make sure we only run once in the given delay. ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > Hope this is better. Thanks, that seems to have everything. Unfortunately, I see nothing that tells me the list should be refreshed on going back :( I could add a hack where if the command is "spotty items item_id:1.0 search:" that it refreshes on back, but that would be fragile and spotty specific. Hmm *Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json (Use http: //SERVER:9000/material/?debug=json,cometd to also see update messages, e.g. play queue) 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here. cpd73's Profile: http://forums.slimdevices.com/member.php?userid=66686 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
cpd73 wrote: > The attached log does not contain all of the response. If you look in > your browser's console tab you will see they end with "..." - clicking > that should expand to show all contents. I'm hoping in the search > response it details what to do when back is pressed. Can you post the > full log? Thanks. Hope this is better. +---+ |Filename: spottysearch2.txt| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=34713| +---+ slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: CastBridge = integrate Chromecast players with LMS (squeeze2cast)
JussiM wrote: > I would like to get it running in silent mode without the status window. > What is the easiest way to achieve this? Very easy. Starting the program at startup with Task Scheduler and ticking the "Hidden" check-box. JussiM's Profile: http://forums.slimdevices.com/member.php?userid=70599 View this thread: http://forums.slimdevices.com/showthread.php?t=104614 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Announce] Ratings Light
mherger wrote: > Im away from my computer. But could you disable photo/video scanning > and try again? Uncheck the relevant boxes right to the path in the basic > settings. Even if one of the 2 messages/rescan done events is due to the external scanner crashing I'm guessing I can't get to the root of what's causing this. I mean what more can I do than a new install, disabling all plugins but the test plugin and then do a rescan. I think the 2 rescan done events even happen if there are no tracks in the library (when LMS starts for the first time). Anyway, since it only affects the -post-scan refresh- I'll try a workaround and add a dedicated post-scan function that calls the refresh function unless it's been done in the last 30 seconds or so. afriend's Profile: http://forums.slimdevices.com/member.php?userid=39306 View this thread: http://forums.slimdevices.com/showthread.php?t=113344 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Q] Delete Tidal albums from library?
Erghh, I simply hadn't noticed that when using the "Add Track/Album/Artist to Library", the album would be added to the Tidal collection online :rolleyes:. This is as close to an actual epiphany I will get this week, I think :o. Thomas Nielsen -I breathe music...- thniels's Profile: http://forums.slimdevices.com/member.php?userid=71094 View this thread: http://forums.slimdevices.com/showthread.php?t=114606 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] [Q] Delete Tidal albums from library?
I have quite a few albums in my library that were added through OMLI. Among these are some inadvertent duplicates and at least one album that was added [horribly :)] before the contributor normalization method. I presume I can only delete these directly from the database and have a fairly good fix on which tables to update. However, I need to be sure that I am not missing a simpler method or a best practice. I wouldn't want to orphan anyone. Once you remove them from your TIDAL collection they should disappear from your library, too. Worst case run a full wipe & rescan. ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
[SlimDevices: Plugins] [Q] Delete Tidal albums from library?
I have quite a few albums in my library that were added through OMLI. Among these are some inadvertent duplicates and at least one album that was added [horribly :)] before the contributor normalization method. I presume I can only delete these directly from the database and have a fairly good fix on which tables to update. However, I need to be sure that I am not missing a simpler method or a best practice. I wouldn't want to orphan anyone. Thomas Nielsen -I breathe music...- thniels's Profile: http://forums.slimdevices.com/member.php?userid=71094 View this thread: http://forums.slimdevices.com/showthread.php?t=114606 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Denon AVP Control Plugin
SamY wrote: > I agree with Chris. If you are determined to use variable player output > (against our recommendations), you should set the Quick Select volume to > the dB level you want it to be when you increase the analog player > volume to 100%, which I would expect to be much higher than the 27dB > that you are using now. With the player output fixed at 100% on my > system, I routinely listen at levels of around 50dB. I understand that > the number will vary depending on things like the efficiency of your > speakers, but 27dB still seems way too low. I'm using on my Denon not the dB scale, but the 0-98 scale. So the 27 is then i think 27% and -53db ? I understand the 100% fixed outpout, but somhow i want also control the volume a little bit with LMS. Therefor i try to achieve a level of 80% of LMS to tweak the volume a little bit remotly. If i want to get volume very high i will walk to the Amp to control the volume. My question is maybe not clear explained by me. The question was if it is possible to change the maximum volume field in to % instead of the dB scale ? This will not change the functionality of the setting, but makes it easier to setup or control. Maybe not so easy to change :rolleyes: - Patrick madpatrick's Profile: http://forums.slimdevices.com/member.php?userid=4929 View this thread: http://forums.slimdevices.com/showthread.php?t=60114 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins
Re: [SlimDevices: Plugins] Announce: Material Skin
slartibartfast wrote: > I entered search then performed a search. There was no response at all > when clicking back. The attached log does not contain all of the response. If you look in your browser's console tab you will see they end with "..." - clicking that should expand to show all contents. I'm hoping in the search response it details what to do when back is pressed. Can you post the full log? Thanks. *Material debug:* 1. Launch via http: //SERVER:9000/material/?debug=json (Use http: //SERVER:9000/material/?debug=json,cometd to also see update messages, e.g. play queue) 2. Open browser's developer tools 3. Open console tab in developer tools 4. REQ/RESP messages sent to/from LMS will be logged here. cpd73's Profile: http://forums.slimdevices.com/member.php?userid=66686 View this thread: http://forums.slimdevices.com/showthread.php?t=109624 ___ plugins mailing list plugins@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/plugins