;#8482;s Recommendations'
};
It used to work for me with this hardware configuration on
Squeezecenter 7.3.1. Thank you for your help!
--
cramcram
cramcram's Profile: http://forums.slimdevices.com
Thank you, Erland. By installing Custom Scan the way you described I
managed to get SqueezeScrobbler 1.2.9 running again on my Diskstation
using SSSODS 4.14 and Squeezebox Server 7.6.1.
--
cramcram
cramcram's Profile
so much, love it.
--
cramcram
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread: http://forums.slimdevices.com/showthread.php?t=79706
pinkdot wrote:
> Synology changed half of their architecture names, so it will all take
> some more time to get new builds up. Just to annoy me ;-)
>
> @cramcram : new build for the 712+ is up. Would be much appriciated if
> you test this build. Thx.
The latest build just won
I'm sorry if this has been asked before: What is the difference between
LMS Repack http://lms-repack.pinkdot.nl/ und LMS Update
http://lms-update.pinkdot.nl/ ? Googeling the forum didn't reveal the
answer...
cramcram's
I have installed the latest version of LMS Repack on my Synology
DS-712+. I have some high-res Flac Files (24bit/96khz). I'm not able to
play them on my Squeezebox Radio. They have to be downsampled to a lower
bitrate in order to be played on a Squeezebox Radio. With SSODS this
worked - it does
pinkdot wrote:
> Hi cramcram,
>
> The 1053 DSM6 package already contains the faad binaries which are
> shipped with LMS. So that might not be the problem. All radia streams
> mentioned in the thread work for me an transcoded to pcm is AAC is
> switched off.
> Can you g
Is it possible to add AAC Plus transcoding support to LMS Update? On
DS-712+ using the latest version (1053) of LMS Update this does not
work. The probable reason for this is documented in this thread:
http://forums.slimdevices.com/showthread.php?99110-Internet-radio-station-won-t-play
The
I'm having troubles with the plugin. When syncing my Touch with one of
the old IP3K players (Classic, Boom) Spotify stops playing the songs
after a couples of seconds, switches to the next songs and completely
stops playing afterwards. The log says:
Code:
[16-04-30
pinkdot wrote:
> For the time being: I could build a package with Michael's workaround,
> removing the freefont. Let me know if you want a modified package.
Of course I'm using LMS update, I also tried your latest 1057 version,
but the issue was still there. If you could do a package with the
pinkdot wrote:
> @Dingsdada, @cramcram,
>
> please do a 'Clear Library and rescan' and reboot your nas. See if the
> problem persists.
> If so, post the log from the point taken after the reboot.
>
> Thanks,
>
> Martin
With pleasure :) :
Spent some time i
pinkdot wrote:
> Please see if your Boom or Classic will make LMS crash with the offical
> Synology Package.
Just gave it a try and installed your test version. LMS does *not* crash
with this version, the special characters including cyrillic are
properly displayed on the old displays. So it
Hi Pinkdot
Here's the DB version of your "new old" test server (that is the same as
the official Synology beta package):
Code:
Datenbankversion: DBD::SQLite 1.34_01 (sqlite 3.7.7.1)
I installed your new 1061 test version. Unfortunately the issue
pinkdot wrote:
> Please give it a spin and see if this is a proper workaround to stop the
> server from crashing, hope so.
Hi Pinkdot, yes, this version works. No more crashing. The cyrillic
characters are transcribed to latin characters on Boom and Classic. Will
you apply the change also to
pinkdot wrote:
> I build a new package for you to test without this specific commit.
> Please let me know if this at least will stop the server from crashing.
> If not, I will apply Michael's suggestion to remove the freefont
> module.
>
> ->' new package 1064 for X86_64'
>
pinkdot wrote:
> We are however a step closer. Let me know if I can help with testing.
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
mherger wrote:
> >
> Did you update your installation? Could there be some render cache fro
> man old installation?
> Michael
No, it's a new installation of the Synology LMS Beta package in DSM. DSM
itself was update from 5 to 6 while LMS was installed already.
pinkdot wrote:
> Thanks cramcram,
>
> This is weird. I just added the Synology fix to make sure certain
> characters are displayed the right way. This is an official Synology
> patch, and also in their official beta package (all architectures). I'm
> almost sure that if I
The title says it all. When browsing through album artists (top down,
from A - Z) on Classic / Boom LMS completely crashes. If have to restart
it in DSM. There's nothing in the server.log. I can properly reproduce
it on my Boom and Classic. It doesn't happen on my touch when browsing
through
cramcram wrote:
> Hi, Martin
>
> This stream, found via Radio >> Search in the LMS Webinterface (search
> for 'kcrw', then select 'KCRW Eclectic 24') is not working for me on the
> old players (Classic, Boom):
>
> http://opml.radiotime.com/Tune.ashx?id=s25510
markschu wrote:
> I keep getting the relogin problem on my qnap ts110. I have tried a new
> password (no facebook) and re syncing. Unfortunately it keeps coming
> back.
I had the same problems, it drove me crazy. As I wrote earlier I had
solved it by re-syncing and by setting a new Spotify
mherger wrote:
> > @mherger: I read in a post by Triode that the Spotify relogin
> mechanism
> > has been implemented in order to get a new Spotify server in case of
> > heavy rebuffering or too slow Spotify responses. My gut feeling tells
> me
> > that maybe this mechanism kicks in too quickly
Since having updated to 1091 on my DSM6 Synology DS-712+ I'm having
troubles. Streams abort, or there is buffering. How can I downgrade to
the 1086 version?
cramcram's Profile:
Updated to the 1081 version on my Intel based Synology NAS. Everything
working fine so far - thank you!
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
I'm having the issue that the Spotify Protocol Handler plugin is relogin
again and again which leads to stuttering.
Code:
[16-07-10 09:10:30.9779] Plugins::SpotifyProtocolHandler::Spotifyd::relogin
(217) requesting relogin
[16-07-10 09:10:49.5758]
cramcram wrote:
> I'm having the issue that the Spotify Protocol Handler plugin is relogin
> again and again which leads to stuttering.
>
> >
Code:
> > [16-07-10 09:10:30.9779]
Plugins::SpotifyProtocolHandler::Spotifyd::relogin (217) requesting
pinkdot wrote:
> Actually there is not that much difference between the two versions.
> Except that there was an addition in crossfading. Check if you have
> crossfading enabled in your player settings. If so disable it and check
> again. Also check if a Bitrate Limiting is set, if so, change it
I just installed this plugin on my Synology NAS. This is my setup:
- LMS 7.9.0 - 163.1131 (using pinkdot LMS update)
- Synology NAS DS-712+ (Intel)
- Youtube plugin 0.51.1
When i try to play this video
https://www.youtube.com/watch?v=PMPg6sFbsJg it reliably stops after 45
seconds and
philippe_44 wrote:
> The files are split into "chunk" and I always bring a full chunk in
> memory to process it. I've limited the buffer to 100kB so far to avoid
> handlign too big buffers, but I was not sure of the right limit, so I
> buped it now to 128kB in 0.51.2
That did the trick! Thanks
pinkdot wrote:
> Hi all,
>
> For those still using DSM4 or DSM5: packages are updated to 1150. This
> version has the exact same status as 'the official community release of
> 7.9.0'
> (http://forums.slimdevices.com/showthread.php?107110-Logitech-Media-Server-7-9-is-out!)
>
> Greetings,
>
>
Probably a dumb question... I'd like to play the 'Dein Mixtape #'
playlists in Spotty. I can find them in the Spotify client under 'Deine
Musik' but not in Spotty. Anybody knows where to find?
cramcram's Profile:
mherger wrote:
> > Probably a dumb question... I'd like to play the 'Dein Mixtape #'
> > playlists in Spotty. I can find them in the Spotify client under
> 'Deine
> > Musik' but not in Spotty. Anybody knows where to find?
>
> Mixtapes unfortunately aren't playlists accessible through the API.
Hi pinkdot
I just gave it a try on my Intel based NAS. It works on my Synology
DS-712+. I have a question about the update mechanism:
1) Does my NAS automatically update the package?
2) Do you manually build new LmsRepack packages or is there some magic
that automatically builds the new
mherger wrote:
> Oh, you'll need 7.9.1 for seeking to work. Sorry about that.
Installed 7.9.1 - seeking works now. Thank you very much!
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this
Is there a way to move my prefs from LmsUpdate to LmsRepack?
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread: http://forums.slimdevices.com/showthread.php?t=107180
mherger wrote:
> Anything in server.log?
No, nothing Spotty related unfortunately.
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
Still no seeking here. The rest works perfectly. Can I help with logs?
If yes, please point me to the right direction.
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
mherger wrote:
> You're sure you're using Spotty and none of the other 3rd party Spotify
> plugins?
Yes, of course.
Setup:
Synology NAS, Intel
Pinkdot LMS Update 7.9.0 - 164.1150
Spotty 0.2.0
Spotify Protocol Handler uninstalled.
Would installing 7.9.1 change anything?
So no bravery was necessary actually. In less than 5 minutes everything
was running on my Intel based Synology NAS running 7.9.0 with the latest
LMS update. Music is playing on my SB3. Thanks for keeping Squeezeboxen
alive! Where can I donate?
mherger wrote:
> Oh, you'll need 7.9.1 for seeking to work. Sorry about that.
No problem. Thanks for the hint. I'll give it a try later and will
report back.
cramcram's Profile:
Anybody got this running on Synology?
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread: http://forums.slimdevices.com/showthread.php?t=108030
mherger wrote:
> > Anybody got this running on Synology?
>
> What Synology? I guess an armel based again?...
>
> --
>
> Michael
Nope - Intel based. LMS says pipe viewer and curl / wget is missing.
Before I start fiddling around with packet managers I'd be happy to hear
from somebody if it
mherger wrote:
> > I have a synology DS1812+ with a Intel Atom D2700 processor. How do
> you
> > install pipe viewer on it?
>
> I'll include a copy with the next update. Hopefully it'll work...
>
> --
>
> Michael
Success on my Synology DS-712+ (Intel-based). It works. I love you,
Michael.
mherger wrote:
> We could probably automate those builds as part of the nightly build
> process.
That would be awesome. I have been running LMS on Synology for the last
9 years and I'm extremely happy with this solution. I really hope it
will be supported in the future.
mherger wrote:
> > However I noticed one detail: On my Boom the plugin displays always
> the
> > title, artist and album information of the first track of a Spotify
> > Connect session. I'm musing the music information screen plugin. On
> my
>
> How did you configure the MIS display? In the
Hi Michael
Since 1.99 the stability of Spotify Connect made an enormous step
forward, I can use it now. Before it hadn't been stable enough in my
setup. I confirm that skipping doesn't occur anymore. Thank you so much!
However I noticed one detail: On my Boom the plugin displays always the
I recently installed a fresh copy of LMS on a brand new Raspberry Pi 3B
with max2play. I installed ShairTunes too. It works beautifully.
Streaming to my squeezeboxes from the Spotify app on my iPhone and iPad
using ShairTunes is for more reliable than using the experimental
Spotify Connect
I finally went down the Raspberry Pi Route and gave up running LMS on my
Synology NAS. I'm using a Raspberry Pi 3B with max2play. Everything
works fine (although slower as on the NAS). Only the Spotty menus
sometimes are really annoyingly slow... When searching for an artist and
then browsing
castalla wrote:
> Not my experience and I use a RPi2 B with max2play so sounds like
> some network/internet bottlenecks/issues.
Rather improbable. On the same network with my Synology menu speed was
fine.
philippe_44 wrote:
> It's probably because it's the model name I have to set (like shairport)
> is not a "certified" AirPlay device. You should probably see the same
> thing with shairport and shairportW
Thanks for the explanation and the fantastic plugin! Strange thing
however is, that the
On 2.3.1 it happened to me from time to time that Spotty would stop
playing songs after having played the first song of a playlist in
Spotify Connect mode. On 2.3.2 now this happened even when starting an
album via the LMS web-interface.
Setup: max2play, LMS, Spotify and iOS all latest
cramcram wrote:
> On 2.3.1 it happened to me from time to time that Spotty would stop
> playing songs after having played the first song of a playlist in
> Spotify Connect mode. On 2.3.2 now this happened even when starting an
> album via the LMS web-interface.
>
> Se
Wouldnt it be possible to create an LMS Spotify plugin based on an
official Spotify library?
Gesendet von iPhone mit Tapatalk
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this
Thx for the incredibly fast fix. 2.3.5 working fine on Max2Play here.
Gesendet von iPhone mit Tapatalk
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
mherger wrote:
> > Wouldnât it be possible to create an LMS Spotify plugin based on an
> > official Spotify library?
>
> Which official library? There are libraries for commercial customers,
> but you don't get them without a company with a lawyer :-).
>
> --
>
> Michael
I expected
Hi Philippe
I'm regularly encountering an issue where the playback stutters and it
won't recover until I reboot LMS and reopen Spotify on my iOS devices.
Here's the setup:
max2play (Stretch image, but the issue occured als on Jessie Lite)
Latest LMS nightly
Dev Version of ShairTunes2 (0.90.5)
cramcram wrote:
> Thanks for the explanation and the fantastic plugin! Strange thing
> however is, that the display sometimes is correct, sometimes not...
Im using ShairTunes2 (fork) 0.80.1 I can give a newer version a test
drive... What would be t
philippe_44 wrote:
> I will give it a try when I'm back. BTW, do you use the stable or the
> dev version of the plugin. I've made a few key improvements in the
> latest dev that make it much more stable in my environment (difficult
> wifi connectivity and most of players). Have you seen a
I'm cutting my servers and players from power when I don't need them.
This causes one problem with the Shairtunes2W plugin. Here's how to
reproduce it:
- Boot LMS (max2play on Raspberry PI)
- Power on Squeezebox Boom
- Play something via Shairtunes2W plugin from iOS device
- Squeezebox Boom
mherger wrote:
> > I've uploaded screenshots of my MIS configuration to this post. I
> > noticed that the problem only occurs, when my Boom is synchronized to
> my
> > Touch. Both of the players are Spotify Connect activated. As soon is
> I
> > unsynchronize my Boom from the Touch the display of
slartibartfast wrote:
> Does the information update eventually? I have seen a delay before the
> information updates.
>
> Sent from my SM-G900F using Tapatalk
No, it doesn't update at all. You can play 30 songs and the Boom would
always show the title information of the very first song of the
jsandquist wrote:
> Running LMS in a Docker container on a Synology 415+ (on host network,
> not bridged).
How did you do that? Is there a tutorial? Can you update the LMS to the
latest nightly build?
cramcram's Profile:
cramcram wrote:
> I'm cutting my servers and players from power when I don't need them.
> This causes one problem with the Shairtunes2W plugin. Here's how to
> reproduce it:
>
> > >
- Boot LMS (max2play on Raspberry PI)
- Power on Squeezebox Boom
- Play somet
mherger wrote:
> > A custom MIS screensaver configuration. Iâ[emoji769]ll update the MIS
> plugin and
> > will report back here.
>
> If it's not fixed, then please let me know the exact MIS configuration
> (what format placeholder in which place etc.)
>
> --
>
> Michael
Its fixed. You
Hughby wrote:
> Long time Spotty user [and donator :) ] here - just started using the
> Spotify Connect interface rather than the LMS Web interface.
>
> Like user cramcram (posts #579, #586 and #599) I am also seeing the
> track display on my Boom not updating correctly as a pl
Hi philippe_44
My server.log is flooded with messages of airplay players being
constantly terminated and created. This happens every minute or so:
Code:
[18-08-29 08:24:34.0403] Plugins::ShairTunes2W::Plugin::removePlayer (383)
publisher for piCorePlayer PID
mherger wrote:
> > No, it doesn't update at all. You can play 30 songs and the Boom would
> > always show the title information of the very first song of the
> > playlist.
>
> What Now Playing screensaver are you using? I fixed an issue with my
> MusicInfoSCR saver yesterday. You might need to
Furry wrote:
> +1 for this.
Would love that too. Maybe just add the info to the album name, e.g.
Hotel California (24/96)
??
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this
mherger wrote:
> > Would love that too. Maybe just add the info to the album name, e.g.
> >
> > Hotel California (24/96)
>
> I don't think the actual bitrate is available, but only a flag
> indicating it's in hires or similar. That would then be
>
> Hotel California (HiRes)
>
> ?
>
> --
mherger wrote:
> v1.350 gives you a new option to "Show Hi-Res label where applicable"
> (off by default).
>
> --
>
> Michael
Works great. Thank you so much!
cramcram's Profile:
mherger wrote:
> I think my attempt to work around that invalid status 204 response from
>
> Spotify not only does not fix this, but also introduced a bunch more
> issues... I'll have to revert that :-(.
Hi Michael, I'm sorry to let you know that since 2 weeks I'm having
different issues
Usually people post here if somethings isn't working, so I thought I'd
do the opposite for once :D Since 2.7.5 Spotty's Spotify Connect
implementation is really stable for the first time ever since there's
Spotty. I guess there was some bigger change in Spotty recently (new
libraries with
mherger wrote:
> Thanks to forum member sveninndh the latest Qobuz 1.500 now comes with a
> much enhanced album menu. Browse to get additional information about the
> album, duration, its artist etc. right from the album's track list. Get
> sample rate etc. information from a playing track's
mherger wrote:
> > Since the update to 1.500 I can't see the Qobuz plugin settings
> anymore.
>
> There should be a 1.501 available to fix this issue.
>
> --
>
> Michael
Fixed! Thx for the immediate help.
First post in this thread: Songs played back via Shairtunes 2 plugin
don't show cover art in Material skin. They do on LMS standard skin and
on the hardware players. Let me know how I can help with debugging. Thx
for this amazing skin. My squeezebox experience is a brand new one :D
First post in this thread, long time iPeng User though. Yesterday I
updated my LMS server to a Raspberry Pi 4 based on max2play beta for the
Pi 4. Everything works fine (and is fast!), except the loading of artist
pictures in iPeng, which is extremely slow. iPeng loads maybe 30 artist
pictures
pippin wrote:
> Also, now that youve used iPeng you could also try a Clear of
> your music library and maybe also clear the artwork cache (no idea how
> you do that on max2play, though).
>
Just did a clear & rescan, didn't help
pippin wrote:
> What usually happens is: the server pre-renders
Having exactly the same issue...
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread: http://forums.slimdevices.com/showthread.php?t=106289
pippin wrote:
> How slow is it?
Very slow. I gave it a test run with iPeng's always active mode. After 3
hours only half of my artists showed the artist photo (600 auf approx
1200. artists).
Furthermore I noticed that the artist photos that were already
downloaded by iPeng were probably not
Hi @mherger
I'm using Spotty regularly since it came out, thx for this great plugin.
Unfortunately Spotify Connect has never been reliably stable for me. It
regularly happens that playback stops. The Spotify app on my smartphone
would then show the next song, playback is off and the progress
cpd73 wrote:
> Don't use Shairtunes - but I will install and investigate.
Just to confirm that Shairtunes artwork is now displayed in Material.
Thank you!
cramcram's Profile:
pippin wrote:
> Did you try to clear the artwork cache?
A full clear and rescan doesnt do the trick?
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
cramcram wrote:
> Everything works fine (and is fast!), except the loading of artist
> pictures in iPeng, which is extremely slow.
Follow-up to this issue: I fired up again LMS on my old Raspberry Pi 3B+
and noticed that there has always been this issue. It's the same as on
th
pippin wrote:
> Hm, but thats definitely not normal.
> Did you try to clear the artwork cache?
> Im not exactly sure how that works on max2play but I think they have a
> menu for it.
> Its in an artwork.db database that sometimes gets corrupted
In the meantime I could manually clear the
Just a short me too: Having the same access token issues as other folks
just described in the last couple of posts since today.
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
Just a short me too: Having the same access token issues as other folks
just described in the last couple of posts since today.
cramcram's Profile: http://forums.slimdevices.com/member.php?userid=22906
View this thread:
Last weekend I installed the latest version of the Community Firmware on
2 Radios, 2 Controllers and one Touch without any problems. It just
worked via Michaels plugin. I did a factory reset on each device before
installing the new firmware. LMS is version 8.1 on max2play. All of my
devices are
Im having exactly the same issue in connect mode. Skipping forward /
backward fixes the problem. If Im right I remember having this issue
ever since there was Spotty.
cramcram's Profile:
Just gave the new version of Shairport-Sync a test run, it works fine
and stable! The instructions to rename the Airplay 2 Endpoint worked as
well. Thank you very much for the update!
2 ideas come to my mind:
- Would it be possible to name the Shairport-Endpoints in the
Picoreplayer
Just fired up a 2nd Picoreplayer with the latest Shairport-sync. Same
symptoms - dont have the radio buttons and thus cant sync - what
AirPlay 2 should do.
cramcram's Profile:
ralphy wrote:
> Perhaps the feature you seek is not implemented in shairplay-sync's
> airplay2 support. Have you confirmed this with the author?
Sync is implemented in shairport-sync, see
https://github.com/mikebrady/shairport-sync/blob/master/AIRPLAY2.md:
Code:
mherger wrote:
> > @mherger Would it be possible to create a connect mode where solely
> > Spotify is in command? Web-Interface and hardware player button
> commands
> > would just be ignored?
>
> I don't think so. At the very least play/stop must be handled on both
> ends, or I would imagine
@mherger Would it be possible to create a connect mode where solely
Spotify is in command? Web-Interface and hardware player button commands
would just be ignored?
Gesendet von iPhone mit Tapatalk
cramcram's Profile:
93 matches
Mail list logo