this was an option if you already had toast a program for burning cds
- you can save discimages in that one -
and if you have toast in both pc and mac they can read each others
images, and toast can mount disk copy images on the mac anyhow.
kenta
Not sure if Roxio EZ CD Creator for Windows can
I am having an interesting time tracking down a PB3400 failure.
After swapping parts around, it appears that my communication card
(the modem/ethernet card internal to the 3400) will prevent booting
if its in place. All I get is some clicking from the power board,
and a very faint clicking from
Although I may need a SCSI burner now that I think about
it, unless I also get a USB or Firewire PCMCIA card and external USB or
Firewire case for the EIDE's as well ... any ideas?
Scuzzy does it best.
Charlie
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog
A friend was given an ibook (g3/266) to use at work. It has
OS 8.1 on it. Any problem with me updating it to 8.6?
That's the highest I have. Anything special I should check before
or do to install it?
Thanks in advance,
Mary
Get hold of an iBook specific 8.6 CD or any G3/4 8.6 CD - the
Subject says it all. I've got an HP 4P scanner and I'm looking for Mac
OS 7 software for it.
Any ideas?
Mike Hebel
If I am not mistaken you can download OS 7 from Apple's website. I got 4P
drivers from HP's site.
Charlie
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small
Hi Charlie,
Unless you'll be using all of 9.1's USB, FireWire, and video enhancing
features
what do you mean by video enhancing features ? Does it makes a 3400 running
faster ?
I do video capture on another Mac and found that 9.1 allows whatever
remaining free space there is on the drive to be
On Fri, 15 Nov 2002 19:24:33 +1100
Adam [EMAIL PROTECTED] wrote:
I'm looking to update the OS on my PowerBook 3400c, and was hoping for some
advice. I remember reading in this list that the best OS for such a machine
was a choice between OS 8.6 and 9.1 (I think it was those two, I lost all my
A L wrote:
Has anyone else run into problems installing Flash 6 on their Macs?
I have a PowerBook 3400 with OS 8.6 (the minimum required for F.6) and
downloaded the Flash installer from Macromedia. The problem is that when it
prompts me for what browser I use (IE, Netscape, Opera) it always
I tested the voltage between the outer metal cylinder against the tip of
the center post. (Since I don't know whether the power adapter is supposed
to supply its 24 volts as DC or AC, I tried both!) Nothing!
Does this mean the adapter is dead, or should the voltage drop be between
two different
I just got a 64 Meg module for my 3400 from ebay. There is a 64meg label on
it, looks like an Apple part #. My 3400 only sees a total of 48
megs...16+32.
Zapping the pram did not help. Anybody ever seen this?
Verify the ram module under System Profiler to see if it is indeed 64 MB.
If it turns
Dennis Helsel wrote:
I've tried transferring a Word file using a floppy disk to a PC
running Windows 98. I used a disk that was formatted on the PC, put
it into the 1400, and it shows up as a PC disk. Dragged the Word
file to it. Ejected and put it into the PC's A drive. When I try to
open
I need a software driver for the following ancient external cd -rom.
Thank you.
Sanyo CDR-93 2 speed external SCSI cd-rom drive. Also known as Sanyo crd-400e
Need software drivers.
Try Apple CD-ROM 5.3.1 (OS 7.6)
Charlie
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small
Just wanted to ask if anyone's using the Li-Ion batteries from the 3500 aka
Kanga in a 3400?
I've swapped the two identical (Lilon) batteries - no problems at all.
Charlie
--
PowerBooks is sponsored by http://lowendmac.com/ and...
Small Dog Electronicshttp://www.smalldog.com |
A Johnson wrote:
1. Under which OS does the PB3400 run best?
2. The obvious upgrades: (a) maximize the RAM; (b) replace the HD with a
larger one; (c) ??
My 3400/200/144MB/5GB came with 9,1 but ran best (and fastest) under 8.1.
Charlie
--
PowerBooks is sponsored by http://lowendmac.com/
Does anyone know if Jaguar eliminates the Sleep of Death phenom for the
Lombard et al. Might make it worthwhile to upgrade just for that!
--
Mike Amato
I thought the Sleep of Death was associated with certain IDE drives and
not the OS.
Charlie
--
PowerBooks is sponsored by
Andrew Kershaw wrote:
Mad Dog,
I'll probably work on it some this weekend (Sat Sun). We're
having houseguests though, so who knows. Also, I have to track down a
weaker soldering iron - mine is too hot and too blunt to be playing on
that level.
A better tool seems to be the Ungar hair dryer
Charlie,
In the same vein, using one of these adapters, could I connect the laptop
ide drive to my Mac with an ATA/66 IDE pci card and format it simply as Mac?
Would this proposed interface be unknown territory or theoretically
possible?
Dave
Sorry I was out the whole day yesterday (6/27)
If
http://store.powerbook1.com/mcecarupser.html
Wow!
[snip]
Would anyone know if it is possible to use a Firewire PC card on a
Powerbook G3/Kanga/3500 and use iMovie?
Thanks,
Jae
Nunavut
MCE's upgrade probably includes the later G3 series cardbus cage that have
a ground plane needed
Chuck Underhill [EMAIL PROTECTED] wrote:
then half way thru the download, the 1400
shutdown. I thought that was strange, it had never just shutdown on me (keep
in mind the unit is on AC, has a junk battery.) I had some trouble getting
it to power back on, I would get the startup sound but
I just downloaded Stuffit Expander from Aladdin's web site on my work PC,
but my new Powerbook 270C doesn't recognize it - trying to go to the PC
Exchange Control Panel to find something to open with (only SimpleText is
there). Found a de-binhexed version (.BIN) and downloaded it, same thing.
How
20 matches
Mail list logo
