Hello all,
I was wondering how I would go about placing a part on the schematic but
not have it appear on the PCB. For example, I would have 3 resistors in
parallel labeled 100, 200, 300 and I would only want one of those three to
appear on the PCB when I updated it. Is there a way to
When using the update pcb command from the schematic choose to preview
changes
then remove the resistors you don't want from the change list. But you
might have to
create a rule for the missing resistors.
Brad Jaurique
Pelco
Clovis, ca
-Original Message-
From:
At 10:47 AM 1/17/2002 -0800, Jaurique, Brad wrote:
When using the update pcb command from the schematic choose to preview
changes
then remove the resistors you don't want from the change list.
This would work, but is unnecessarily cumbersome. One could accomplish the
same thing by deleting the
At 10:35 AM 1/17/2002 -0800, Afshin Salehi wrote:
Hello all,
I was wondering how I would go about placing a part on the
schematic but
not have it appear on the PCB. For example, I would have 3 resistors in
parallel labeled 100, 200, 300 and I would only want one of those three to