Thanks Ian for the information. I was concerned about the grid also.
I'll add the testpoint component to the schematics which will give me
more flexibility. Thanks again.
Tom
Ian Wilson wrote:
On 08:06 AM 3/06/2004, Tom Reineking said:
.. 4 hours later ...
Just got my post back and I did
I have a fairly complex BGA design that requires via tenting, at least
on the component side. The PCB assembly will not go through wave
solder, so no problem with the solder side. There are two problems I
have run into. The first is tenting on one side. I checked the KB and
only DXP and up
.. 4 hours later ...
Just got my post back and I did find an answer to the report part
concerning nets without testpoints. The design rule Testpoint Usage
does generate violations for those nets and therefore a report can be
generated. There is also a document on the Protel web site in the
On 08:06 AM 3/06/2004, Tom Reineking said:
.. 4 hours later ...
Just got my post back and I did find an answer to the report part
concerning nets without testpoints. The design rule Testpoint Usage does
generate violations for those nets and therefore a report can be
generated. There is also
Hello,
I have a design that is completed, all routed, and the engineer has
decided he wants test points on every net on the bottom side. Is there
an easy way of doing this besides by hand from net to net?
Thanks,
Brad Marshall
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To
