On 10:18 PM 4/02/2001 +0000, Rob Malos said:
>Steve,
> You are right of course, not all the errors, but I believe will
> suppress
>any 'Multiple Net' errors. Having been nearly badly burned that myself
>wanted to
>stress the potential problem.
>
>Please describe what you want in the way of new pin features and send it
>in under
>the Suggestions for improving Protel thread that is running.
>
>Regards,
>
>Rob Malos,
>Cyborg Design.
What about splitting the power pint type into two - Power (source) and a
Power (sink). There should be at least one power (source) on each power
net. A setting in the ERC matrix would allow multiple Power (sources) on a
net. This would allow finer control of power nets. And would easily fit
into the current ERC regime.
Ian Wilson
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This message sent by: PROTEL EDA USERS MAILING LIST
*
* Use the "reply" command in your email program to
* respond to this message.
*
* To unsubscribe from this mailing list use the form at
* the Association web site. You will need to give the same
* email address you originally used to subscribe (do not
* give an alias unless it was used to subscribe).
*
* Visit http://www.techservinc.com/protelusers/subscrib.html
* to unsubscribe or to subscribe a new email address.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
________________________________________________________
To leave the EDAFORUM discussion list, send a email with
'leave edaforum' in the body to '[EMAIL PROTECTED]'
More Information : http://www.dolist.net