11/09/2002 01:38:15, Damon Kelly [EMAIL PROTECTED] wrote:
Can I have a 3 pad PCB footprint and only load a 2 terminal part? Will the
PnP generator get confused?
I've been known to cheat and place a zero-ohm resistor on top of the (no-
fitted) 3-pin jumper. It can be fully described in the
A simple method I've used several times is to indicate on the schematic
the two select resistors, calling them out as 0805s, then simply placed
them such that the ends which are commoned on the schematic physically
lie on top of each other with their bodies in-line. Selection is by loading
one or
to that
effect, said Blackadder.
Damon Kelly
Hardware Engineer
-Original Message-
From: Brian Sherer [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 12 September 2002 00:30
To: Protel EDA Forum
Subject: Re: [PEDA] Address select jumper using 0R links...
A simple method I've used several
I need to select the address of a card using 0R (0805) links, and I want to
create a footprint with 3 SM pads, and be able to specify the link be loaded
1-2 or 2-3, without having to manually edit the Pick and Place file.
I don't mind using two different SCH components (since changing will happen
