Re: [PEDA] Importing PADS 3.5
> The pattern below repeats over and over in the PADS .ASC file, there are > no listings of tracks connecting the components. We think that this file is > only a listing of the board components and not a true representation of the > board. Hopefully a complete .ASC file will allow the board to be imported. > Frank, It looks like you are not checking that right options to ASCII out. If the file was handed to you like that then there isnt much you can do. When you export out, there should be a dialog with options to select connections, attributes, parts, traces etc. I generally select all, and export to a 2.x version. so that it filters and drops PADs newe attributes. Mike Reagan EDSI Frederick * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Importing PADS 3.5
The pattern below repeats over and over in the PADS .ASC file, there are no listings of tracks connecting the components. We think that this file is only a listing of the board components and not a true representation of the board. Hopefully a complete .ASC file will allow the board to be imported. C1 CAP_0805 2913 3975 0.000 U N 0 -1 0 -1 3 VALUE -15 -22.5 0.000 27 60 6 N LEFT DOWN Ref.Des. VALUE -42 145 0.000 1 100 10 N LEFT DOWN Part Type VALUE -13-115 0.000 1 60 6 N LEFT DOWN Ref.Des. C10 CAP_0805 3084 3975 0.000 U N 0 -1 0 -1 3 VALUE -30 -15 0.000 27 60 6 N LEFT DOWN Ref.Des. VALUE -177.22 -110.04 0.000 1 100 10 N LEFT DOWN Part Type VALUE 116 -15 0.000 1 60 6 N LEFT DOWN Ref.Des. Thanks, Frank Project Development P.O. Box 5582 Bend, OR 97708 Mike Reagan wrote: > > With this 3.5 file I'm getting an error message for every component > saying > > that the footprint can't be found and the component can't be imported. > I've > > got my available libraries opened but the board is from another designer > who's > > libraries I don't have. Any work around? > > > > Frank, > Give me some clarificationare you exporting to ASCII first? Is the > error message from Protel ? or are you trying to open a file in PADs and > that is the message? > > Mike Reagan > EDSI > Frederick MD * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Importing PADS 3.5
> With this 3.5 file I'm getting an error message for every component saying > that the footprint can't be found and the component can't be imported. I've > got my available libraries opened but the board is from another designer who's > libraries I don't have. Any work around? > Frank, Give me some clarificationare you exporting to ASCII first? Is the error message from Protel ? or are you trying to open a file in PADs and that is the message? Mike Reagan EDSI Frederick MD * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Importing PADS 3.5
With this 3.5 file I'm getting an error message for every component saying that the footprint can't be found and the component can't be imported. I've got my available libraries opened but the board is from another designer who's libraries I don't have. Any work around? Thanks, Frank Langlois Project Development P.O. Box 5582 Bend, OR 97708 Michael Reagan wrote: > > > > Is there still a problem with importing PADS PowerPCB V3.5 files? > > What is the best PADS version to convert the file to before importing to > > Protel? > > > > Frank, > I have converted quite a few boards over from PADs. I own up to PADs 3.5 > but have found exporting to an ASCII version around 2.X works best. The > layer mapping is generally correct and less can wrong because many of the > PADs "attributes" dont get in the way of the conversion. > > Good Luck > > Mike Reagan > EDSI > Frederick MD * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
Re: [PEDA] Importing PADS 3.5
> > Is there still a problem with importing PADS PowerPCB V3.5 files? > What is the best PADS version to convert the file to before importing to > Protel? > Frank, I have converted quite a few boards over from PADs. I own up to PADs 3.5 but have found exporting to an ASCII version around 2.X works best. The layer mapping is generally correct and less can wrong because many of the PADs "attributes" dont get in the way of the conversion. Good Luck Mike Reagan EDSI Frederick MD * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
[PEDA] Importing PADS 3.5
Is there still a problem with importing PADS PowerPCB V3.5 files? What is the best PADS version to convert the file to before importing to Protel? Thanks, Frank Langlois Project Development P.O. Box 5582 Bend, OR 97708 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * To post a message: mailto:[EMAIL PROTECTED] * * To leave this list visit: * http://www.techservinc.com/protelusers/leave.html * * Contact the list manager: * mailto:[EMAIL PROTECTED] * * Forum Guidelines Rules: * http://www.techservinc.com/protelusers/forumrules.html * * Browse or Search previous postings: * http://www.mail-archive.com/proteledaforum@techservinc.com * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *