RE: Some problems plz?

[Martin (Punky) Sopart]

Hello Ramy!

Look at:

https://ptaccess.github.io

Best! / Martin
-Original Message-
From: ptaccess@googlegroups.com  On Behalf Of Ramy 
Moustafa Saber
Sent: Tuesday, August 9, 2022 11:10 AM
To: protools mailing list 
Subject: Re: Some problems plz?

Thanks so much SLau, but where can i find your check list?

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University

> On Aug 8, 2022, at 5:56 PM, Slau Halatyn  wrote:
> 
> Hi Ramy,
> If you really want to be able to keep discrete Plug-in windows open to be 
> able to switch between them more easily, open a plug-in and click on the 
> target button. Then open the Mix window and open the other plug-in you wish 
> to switch to. Now you'll have 2 plug-in windows open at the same time. If you 
> followed my pre-flight checklist and set the Control+F6 shortcut in Keyboard 
> preference pane, you can flip between the 2 plug-in windows with Control+F6.
> HTH,
> Slau
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/C744E76B-95F2-4905-A1A1-4E56FFF3B61A%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/25BE0C4C-B150-4D99-9881-4B4AB203979B%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/003701d8abd0%24426c2300%24c7446900%24%40cakewalker.de.

Re: Some problems plz?

[Ramy Moustafa Saber]

Thanks so much SLau, but where can i find your check list?

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University

> On Aug 8, 2022, at 5:56 PM, Slau Halatyn  wrote:
> 
> Hi Ramy,
> If you really want to be able to keep discrete Plug-in windows open to be 
> able to switch between them more easily, open a plug-in and click on the 
> target button. Then open the Mix window and open the other plug-in you wish 
> to switch to. Now you'll have 2 plug-in windows open at the same time. If you 
> followed my pre-flight checklist and set the Control+F6 shortcut in Keyboard 
> preference pane, you can flip between the 2 plug-in windows with Control+F6.
> HTH,
> Slau
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/C744E76B-95F2-4905-A1A1-4E56FFF3B61A%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/25BE0C4C-B150-4D99-9881-4B4AB203979B%40gmail.com.

Re: Some problems plz?

[Slau Halatyn]

Hi Ramy,
If you really want to be able to keep discrete Plug-in windows open to be able 
to switch between them more easily, open a plug-in and click on the target 
button. Then open the Mix window and open the other plug-in you wish to switch 
to. Now you'll have 2 plug-in windows open at the same time. If you followed my 
pre-flight checklist and set the Control+F6 shortcut in Keyboard preference 
pane, you can flip between the 2 plug-in windows with Control+F6.
HTH,
Slau

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/C744E76B-95F2-4905-A1A1-4E56FFF3B61A%40gmail.com.

Re: Some problems plz?

[Slau Halatyn]

Hi Ramy,
Again as Martin points out, use the trak selector and then the insert selector.

> On Aug 8, 2022, at 10:38 AM, Ramy Moustafa Saber  
> wrote:
> 
> Thanks so much Slau.
> COncerning Plugins, The 2 plugins that i need to toggle between are on 2 
> different tracks, so, this method will not work.
> 
> Warm Regards,
> Dr/ Ramy Moustafa Saber
> Music Producer and Sound Engineer
> Music Instructor at: Faculty of Musical Education
> Helwan University
> 
>> On Aug 8, 2022, at 4:18 PM, Slau Halatyn > > wrote:
>> 
>> Hi Ramy,
>> Just to underline what Martin said, within the plug-in window, aside from 
>> the track selector, there's an insert selector which displays the Letter 
>> name of the insert. If you click on that, you'll get a pop-up menu and you 
>> can access all inserts from there. If there's a plug-in instantiated, the 
>> insert letter will be followed by the name of the plug-in on that insert.
>> Regarding the automation, I covered exactly this material in the most recent 
>> chapter of the PT Guide for Screen Reader Users. Hope that helps,\
>> Slau
>> 
>> 
>>> On Aug 8, 2022, at 3:01 AM, Ramy Moustafa >> > wrote:
>>> 
>>> Hello Mr. Slau:
>>> COncerning the Target plugin:
>>> I do not want to see multible plugins opened at the same window or 
>>> something, all i need is an easy method for switching between them,so, if i 
>>> have a compressor opened, and i need to switch between it and an Eq for 
>>> instance, each time i should hit command ` to move between windows and go 
>>> and open the other one, etc, so is there an easy way for switching?
>>> 
>>> COncerning Automation:
>>> Thanks so much for your explnation, however, If you do not mind, i need 
>>> more explnation  or an audio demo please, because  can not do all you told 
>>> me.
>>> Thanks so much for your help
>>> 
>>> Warm Regards,
>>> Dr/ Ramy Moustafa Saber
>>> Music Producer and Sound Engineer
>>> Music Instructor at: Faculty of Musical Education
>>> Helwan University
>>> 
>>> 
>>>  
>>> 
>>> 
 On 7 Aug 2022, at 6:39 PM, Slau Halatyn >>> > wrote:
 
 Dear Doctor Ramy,
 
 My responses interspersed below:
 On Aug 7, 2022, at 11:25 AM, Ramy Moustafa >>> > wrote:
> 
> Hello all:
> While taking a small mastering course, i am facing some problems related 
> to SOme plugins and VOice over, so I will write them here, and hope you 
> can help me fixing what am facing.
> 
> 1- how can we Read inside the VU Meeter? is there an accessible VU meeter 
> plugin?
 VoiceOver only sees one value for metering. It cannot read VU specifically.
 
> 2- moving between Open plugins without opening 1 by 1 each time, I tried 
> TO press on Target plugin but with no help.
 By default, only one plug-in window is open at a time. I wouldn't 
 recommend using more than one plug-in window because you can't see more 
 than one window at a time and, since you would need to bring up the window 
 Chooser and make sure the window is the target, simply selecting from the 
 track selector in one window is more straight-forward.
 
> 3- how can i write Volume Automation  by section using Keyboard not 
> COntrol surface? so i need to add 1 Db volume from bar 10 to bar 20, can 
> i do this using Just my keyboard or i should use COntrol surface etc?
 This is a deceptively complex question because it depends on a number of 
 factors. To offer an answer that'll work under all circumstances, Make 
 your selection and enter Auto Latch Trim mode and change the volume fader 
 to +1 dB. Engage the transport and either let it play through the 
 selection or use the Write To Selection button in the Automation window if 
 it's a long section that you don't want to play all the way through.
 
> 4- When i need to load presets from the Ozone9, Pro tools always crash, 
> but when voice over is off, it works, is there a solution?
 See if others can recreate the issue and, if so, open a support ticket 
 with Izotope.
 
> 5- what is a good EQ that can do mid side technique? I tried the Ozone 9 
> EQ, and it crashes with VOice over.
 See my response on WhatsApp.
 
> 
> Warm Regards,
> Dr/ Ramy Moustafa Saber
> Music Producer and Sound Engineer
> Music Instructor at: Faculty of Musical Education
> Helwan University
> 
> 
>  
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> 

Re: Some problems plz?

[Slau Halatyn]

Hi Martin,
I simply pointed out that Plug-in Alliance has a number of options and reading 
the manual is key to be able to make sense of things.
Slau


> On Aug 8, 2022, at 10:32 AM, Martin (Punky) Sopart  wrote:
> 
> Hello Slau!
> 
> Was there anything helpful on WhatsApp regarding the eq mid side question?
> 
> Thanks and best! / Martin
> -Original Message-
> From: ptaccess@googlegroups.com  On Behalf Of Slau 
> Halatyn
> Sent: Sunday, August 7, 2022 6:39 PM
> To: PTAccess List 
> Subject: Re: Some problems plz?
> 
> Dear Doctor Ramy,
> 
> My responses interspersed below:
> 
> On Aug 7, 2022, at 11:25 AM, Ramy Moustafa  <mailto:ramy.moustaf...@gmail.com> > wrote:
> 
> 
> 
>   Hello all:
>   While taking a small mastering course, i am facing some problems 
> related to SOme plugins and VOice over, so I will write them here, and hope 
> you can help me fixing what am facing.
> 
>   1- how can we Read inside the VU Meeter? is there an accessible VU 
> meeter plugin?
> 
> VoiceOver only sees one value for metering. It cannot read VU specifically.
> 
> 
>   2- moving between Open plugins without opening 1 by 1 each time, I 
> tried TO press on Target plugin but with no help.
> 
> By default, only one plug-in window is open at a time. I wouldn't recommend 
> using more than one plug-in window because you can't see more than one window 
> at a time and, since you would need to bring up the window Chooser and make 
> sure the window is the target, simply selecting from the track selector in 
> one window is more straight-forward.
> 
> 
>   3- how can i write Volume Automation  by section using Keyboard not 
> COntrol surface? so i need to add 1 Db volume from bar 10 to bar 20, can i do 
> this using Just my keyboard or i should use COntrol surface etc?
> 
> This is a deceptively complex question because it depends on a number of 
> factors. To offer an answer that'll work under all circumstances, Make your 
> selection and enter Auto Latch Trim mode and change the volume fader to +1 
> dB. Engage the transport and either let it play through the selection or use 
> the Write To Selection button in the Automation window if it's a long section 
> that you don't want to play all the way through.
> 
> 
>   4- When i need to load presets from the Ozone9, Pro tools always crash, 
> but when voice over is off, it works, is there a solution?
> 
> See if others can recreate the issue and, if so, open a support ticket with 
> Izotope.
> 
> 
>   5- what is a good EQ that can do mid side technique? I tried the Ozone 
> 9 EQ, and it crashes with VOice over.
> 
> See my response on WhatsApp.
> 
> 
> 
>   Warm Regards,
>   Dr/ Ramy Moustafa Saber
>   Music Producer and Sound Engineer
>   Music Instructor at: Faculty of Musical Education
>   Helwan University
>   
>   
>   
>   
>   
> 
>  
> 
> 
>   -- 
>   You received this message because you are subscribed to the Google 
> Groups "Pro Tools Accessibility" group.
>   To unsubscribe from this group and stop receiving emails from it, send 
> an email to ptaccess+unsubscr...@googlegroups.com 
> <mailto:ptaccess+unsubscr...@googlegroups.com> .
>   To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com
>  
> <https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com?utm_medium=email_source=footer>
>  .
>   
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com 
> <mailto:ptaccess+unsubscr...@googlegroups.com> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com
>  
> <https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com?utm_medium=email_source=footer>
>  .
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/00f901d8ab33%24ae41f6b0%240ac5e410%24%40cakewalker.de.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/30F06656-A1E3-406E-9816-47EDAA8A7FF4%40gmail.com.

RE: Some problems plz?

[Martin (Punky) Sopart]

Hello Ramy!

Yes, it would.
In the same plug-in window you'll also find a pop-up menu to change the track 
to use.
Just explore that plug-in window by VoiceOver.

Best! / Martin
-Original Message-
From: ptaccess@googlegroups.com  On Behalf Of Ramy 
Moustafa Saber
Sent: Monday, August 8, 2022 4:39 PM
To: protools mailing list 
Subject: Re: Some problems plz?

Thanks so much Slau.
COncerning Plugins, The 2 plugins that i need to toggle between are on 2 
different tracks, so, this method will not work.

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University 


On Aug 8, 2022, at 4:18 PM, Slau Halatyn mailto:slauhala...@gmail.com> > wrote:

Hi Ramy,
Just to underline what Martin said, within the plug-in window, aside 
from the track selector, there's an insert selector which displays the Letter 
name of the insert. If you click on that, you'll get a pop-up menu and you can 
access all inserts from there. If there's a plug-in instantiated, the insert 
letter will be followed by the name of the plug-in on that insert.
Regarding the automation, I covered exactly this material in the most 
recent chapter of the PT Guide for Screen Reader Users. Hope that helps,\
Slau



On Aug 8, 2022, at 3:01 AM, Ramy Moustafa 
mailto:ramy.moustaf...@gmail.com> > wrote:

Hello Mr. Slau:
COncerning the Target plugin:
I do not want to see multible plugins opened at the same window 
or something, all i need is an easy method for switching between them,so, if i 
have a compressor opened, and i need to switch between it and an Eq for 
instance, each time i should hit command ` to move between windows and go and 
open the other one, etc, so is there an easy way for switching?

COncerning Automation:
Thanks so much for your explnation, however, If you do not 
mind, i need more explnation  or an audio demo please, because  can not do all 
you told me.
Thanks so much for your help

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University






 


On 7 Aug 2022, at 6:39 PM, Slau Halatyn 
mailto:slauhala...@gmail.com> > wrote:




Dear Doctor Ramy,

My responses interspersed below:

On Aug 7, 2022, at 11:25 AM, Ramy Moustafa 
mailto:ramy.moustaf...@gmail.com> > wrote:



Hello all:
While taking a small mastering course, i am 
facing some problems related to SOme plugins and VOice over, so I will write 
them here, and hope you can help me fixing what am facing.

1- how can we Read inside the VU Meeter? is 
there an accessible VU meeter plugin?

VoiceOver only sees one value for metering. It cannot 
read VU specifically.


2- moving between Open plugins without opening 
1 by 1 each time, I tried TO press on Target plugin but with no help.

By default, only one plug-in window is open at a time. 
I wouldn't recommend using more than one plug-in window because you can't see 
more than one window at a time and, since you would need to bring up the window 
Chooser and make sure the window is the target, simply selecting from the track 
selector in one window is more straight-forward.


3- how can i write Volume Automation  by 
section using Keyboard not COntrol surface? so i need to add 1 Db volume from 
bar 10 to bar 20, can i do this using Just my keyboard or i should use COntrol 
surface etc?

This is a deceptively complex question because it 
depends on a number of factors. To offer an answer that'll work under all 
circumstances, Make your selection and enter Auto Latch Trim mode and change 
the volume fader to +1 dB. Engage the transport and either let it play through 
the selection or use the Write To Selection button in the Automation window if 
it's a long section that you don't want to play all the way through.


4- When i need to load presets from the Ozone9, 
Pro tools always crash, but when voice over is off, it works, is there a 
solution?

See if others can recreate the issue and, if so, open a 
support ticket with Izotope.


5- what is a good EQ that can do mid side 
technique? I tried the Oz

Re: Some problems plz?

[Ramy Moustafa Saber]

Hello:
I found a great EQ plugin called Rs56 that can make mid side EQ.
am discovering it with my friend, i think it is accessible.

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University

> On Aug 8, 2022, at 4:32 PM, Martin (Punky) Sopart  wrote:
> 
> Hello Slau!
> 
> Was there anything helpful on WhatsApp regarding the eq mid side question?
> 
> Thanks and best! / Martin
> -Original Message-
> From: ptaccess@googlegroups.com  On Behalf Of Slau 
> Halatyn
> Sent: Sunday, August 7, 2022 6:39 PM
> To: PTAccess List 
> Subject: Re: Some problems plz?
> 
> Dear Doctor Ramy,
> 
> My responses interspersed below:
> 
> On Aug 7, 2022, at 11:25 AM, Ramy Moustafa  <mailto:ramy.moustaf...@gmail.com> > wrote:
> 
> 
> 
>   Hello all:
>   While taking a small mastering course, i am facing some problems 
> related to SOme plugins and VOice over, so I will write them here, and hope 
> you can help me fixing what am facing.
> 
>   1- how can we Read inside the VU Meeter? is there an accessible VU 
> meeter plugin?
> 
> VoiceOver only sees one value for metering. It cannot read VU specifically.
> 
> 
>   2- moving between Open plugins without opening 1 by 1 each time, I 
> tried TO press on Target plugin but with no help.
> 
> By default, only one plug-in window is open at a time. I wouldn't recommend 
> using more than one plug-in window because you can't see more than one window 
> at a time and, since you would need to bring up the window Chooser and make 
> sure the window is the target, simply selecting from the track selector in 
> one window is more straight-forward.
> 
> 
>   3- how can i write Volume Automation  by section using Keyboard not 
> COntrol surface? so i need to add 1 Db volume from bar 10 to bar 20, can i do 
> this using Just my keyboard or i should use COntrol surface etc?
> 
> This is a deceptively complex question because it depends on a number of 
> factors. To offer an answer that'll work under all circumstances, Make your 
> selection and enter Auto Latch Trim mode and change the volume fader to +1 
> dB. Engage the transport and either let it play through the selection or use 
> the Write To Selection button in the Automation window if it's a long section 
> that you don't want to play all the way through.
> 
> 
>   4- When i need to load presets from the Ozone9, Pro tools always crash, 
> but when voice over is off, it works, is there a solution?
> 
> See if others can recreate the issue and, if so, open a support ticket with 
> Izotope.
> 
> 
>   5- what is a good EQ that can do mid side technique? I tried the Ozone 
> 9 EQ, and it crashes with VOice over.
> 
> See my response on WhatsApp.
> 
> 
> 
>   Warm Regards,
>   Dr/ Ramy Moustafa Saber
>   Music Producer and Sound Engineer
>   Music Instructor at: Faculty of Musical Education
>   Helwan University
>   
>   
>   
>   
>   
> 
>  
> 
> 
>   -- 
>   You received this message because you are subscribed to the Google 
> Groups "Pro Tools Accessibility" group.
>   To unsubscribe from this group and stop receiving emails from it, send 
> an email to ptaccess+unsubscr...@googlegroups.com 
> <mailto:ptaccess+unsubscr...@googlegroups.com> .
>   To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com
>  
> <https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com?utm_medium=email_source=footer>
>  .
>   
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com 
> <mailto:ptaccess+unsubscr...@googlegroups.com> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com
>  
> <https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com?utm_medium=email_source=footer>
>  .
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/00f901d8ab33%24ae41f6b0%240ac5e410%24%40cakewalker.de.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/135CE75F-BDF9-4FC8-BF2B-B2C01D7375DE%40gmail.com.

Re: Some problems plz?

[Ramy Moustafa Saber]

Thanks so much Slau.
COncerning Plugins, The 2 plugins that i need to toggle between are on 2 
different tracks, so, this method will not work.

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University

> On Aug 8, 2022, at 4:18 PM, Slau Halatyn  wrote:
> 
> Hi Ramy,
> Just to underline what Martin said, within the plug-in window, aside from the 
> track selector, there's an insert selector which displays the Letter name of 
> the insert. If you click on that, you'll get a pop-up menu and you can access 
> all inserts from there. If there's a plug-in instantiated, the insert letter 
> will be followed by the name of the plug-in on that insert.
> Regarding the automation, I covered exactly this material in the most recent 
> chapter of the PT Guide for Screen Reader Users. Hope that helps,\
> Slau
> 
> 
>> On Aug 8, 2022, at 3:01 AM, Ramy Moustafa > > wrote:
>> 
>> Hello Mr. Slau:
>> COncerning the Target plugin:
>> I do not want to see multible plugins opened at the same window or 
>> something, all i need is an easy method for switching between them,so, if i 
>> have a compressor opened, and i need to switch between it and an Eq for 
>> instance, each time i should hit command ` to move between windows and go 
>> and open the other one, etc, so is there an easy way for switching?
>> 
>> COncerning Automation:
>> Thanks so much for your explnation, however, If you do not mind, i need more 
>> explnation  or an audio demo please, because  can not do all you told me.
>> Thanks so much for your help
>> 
>> Warm Regards,
>> Dr/ Ramy Moustafa Saber
>> Music Producer and Sound Engineer
>> Music Instructor at: Faculty of Musical Education
>> Helwan University
>> 
>> 
>>  
>> 
>> 
>>> On 7 Aug 2022, at 6:39 PM, Slau Halatyn >> > wrote:
>>> 
>>> Dear Doctor Ramy,
>>> 
>>> My responses interspersed below:
>>> On Aug 7, 2022, at 11:25 AM, Ramy Moustafa >> > wrote:
 
 Hello all:
 While taking a small mastering course, i am facing some problems related 
 to SOme plugins and VOice over, so I will write them here, and hope you 
 can help me fixing what am facing.
 
 1- how can we Read inside the VU Meeter? is there an accessible VU meeter 
 plugin?
>>> VoiceOver only sees one value for metering. It cannot read VU specifically.
>>> 
 2- moving between Open plugins without opening 1 by 1 each time, I tried 
 TO press on Target plugin but with no help.
>>> By default, only one plug-in window is open at a time. I wouldn't recommend 
>>> using more than one plug-in window because you can't see more than one 
>>> window at a time and, since you would need to bring up the window Chooser 
>>> and make sure the window is the target, simply selecting from the track 
>>> selector in one window is more straight-forward.
>>> 
 3- how can i write Volume Automation  by section using Keyboard not 
 COntrol surface? so i need to add 1 Db volume from bar 10 to bar 20, can i 
 do this using Just my keyboard or i should use COntrol surface etc?
>>> This is a deceptively complex question because it depends on a number of 
>>> factors. To offer an answer that'll work under all circumstances, Make your 
>>> selection and enter Auto Latch Trim mode and change the volume fader to +1 
>>> dB. Engage the transport and either let it play through the selection or 
>>> use the Write To Selection button in the Automation window if it's a long 
>>> section that you don't want to play all the way through.
>>> 
 4- When i need to load presets from the Ozone9, Pro tools always crash, 
 but when voice over is off, it works, is there a solution?
>>> See if others can recreate the issue and, if so, open a support ticket with 
>>> Izotope.
>>> 
 5- what is a good EQ that can do mid side technique? I tried the Ozone 9 
 EQ, and it crashes with VOice over.
>>> See my response on WhatsApp.
>>> 
 
 Warm Regards,
 Dr/ Ramy Moustafa Saber
 Music Producer and Sound Engineer
 Music Instructor at: Faculty of Musical Education
 Helwan University
 
 
  
 
 
 -- 
 You received this message because you are subscribed to the Google Groups 
 "Pro Tools Accessibility" group.
 To unsubscribe from this group and stop receiving emails from it, send an 
 email to ptaccess+unsubscr...@googlegroups.com 
 .
 To view this discussion on the web visit 
 https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com
  
 .
>>> 
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To 

RE: Some problems plz?

[Martin (Punky) Sopart]

Hello Slau!

Was there anything helpful on WhatsApp regarding the eq mid side question?

Thanks and best! / Martin
-Original Message-
From: ptaccess@googlegroups.com  On Behalf Of Slau 
Halatyn
Sent: Sunday, August 7, 2022 6:39 PM
To: PTAccess List 
Subject: Re: Some problems plz?

Dear Doctor Ramy,

My responses interspersed below:

On Aug 7, 2022, at 11:25 AM, Ramy Moustafa mailto:ramy.moustaf...@gmail.com> > wrote:



Hello all:
While taking a small mastering course, i am facing some problems 
related to SOme plugins and VOice over, so I will write them here, and hope you 
can help me fixing what am facing.

1- how can we Read inside the VU Meeter? is there an accessible VU 
meeter plugin?

VoiceOver only sees one value for metering. It cannot read VU specifically.


2- moving between Open plugins without opening 1 by 1 each time, I 
tried TO press on Target plugin but with no help.

By default, only one plug-in window is open at a time. I wouldn't recommend 
using more than one plug-in window because you can't see more than one window 
at a time and, since you would need to bring up the window Chooser and make 
sure the window is the target, simply selecting from the track selector in one 
window is more straight-forward.


3- how can i write Volume Automation  by section using Keyboard not 
COntrol surface? so i need to add 1 Db volume from bar 10 to bar 20, can i do 
this using Just my keyboard or i should use COntrol surface etc?

This is a deceptively complex question because it depends on a number of 
factors. To offer an answer that'll work under all circumstances, Make your 
selection and enter Auto Latch Trim mode and change the volume fader to +1 dB. 
Engage the transport and either let it play through the selection or use the 
Write To Selection button in the Automation window if it's a long section that 
you don't want to play all the way through.


4- When i need to load presets from the Ozone9, Pro tools always crash, 
but when voice over is off, it works, is there a solution?

See if others can recreate the issue and, if so, open a support ticket with 
Izotope.


5- what is a good EQ that can do mid side technique? I tried the Ozone 
9 EQ, and it crashes with VOice over.

See my response on WhatsApp.



Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University






 


-- 
You received this message because you are subscribed to the Google 
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to ptaccess+unsubscr...@googlegroups.com 
<mailto:ptaccess+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com
 
<https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com?utm_medium=email_source=footer>
 .



-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com 
<mailto:ptaccess+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com
 
<https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com?utm_medium=email_source=footer>
 .


-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/00f901d8ab33%24ae41f6b0%240ac5e410%24%40cakewalker.de.

Re: Some problems plz?

[Slau Halatyn]

Hi Ramy,
Just to underline what Martin said, within the plug-in window, aside from the 
track selector, there's an insert selector which displays the Letter name of 
the insert. If you click on that, you'll get a pop-up menu and you can access 
all inserts from there. If there's a plug-in instantiated, the insert letter 
will be followed by the name of the plug-in on that insert.
Regarding the automation, I covered exactly this material in the most recent 
chapter of the PT Guide for Screen Reader Users. Hope that helps,\
Slau


> On Aug 8, 2022, at 3:01 AM, Ramy Moustafa  wrote:
> 
> Hello Mr. Slau:
> COncerning the Target plugin:
> I do not want to see multible plugins opened at the same window or something, 
> all i need is an easy method for switching between them,so, if i have a 
> compressor opened, and i need to switch between it and an Eq for instance, 
> each time i should hit command ` to move between windows and go and open the 
> other one, etc, so is there an easy way for switching?
> 
> COncerning Automation:
> Thanks so much for your explnation, however, If you do not mind, i need more 
> explnation  or an audio demo please, because  can not do all you told me.
> Thanks so much for your help
> 
> Warm Regards,
> Dr/ Ramy Moustafa Saber
> Music Producer and Sound Engineer
> Music Instructor at: Faculty of Musical Education
> Helwan University
> 
> 
>  
> 
> 
>> On 7 Aug 2022, at 6:39 PM, Slau Halatyn  wrote:
>> 
>> Dear Doctor Ramy,
>> 
>> My responses interspersed below:
>> On Aug 7, 2022, at 11:25 AM, Ramy Moustafa > > wrote:
>>> 
>>> Hello all:
>>> While taking a small mastering course, i am facing some problems related to 
>>> SOme plugins and VOice over, so I will write them here, and hope you can 
>>> help me fixing what am facing.
>>> 
>>> 1- how can we Read inside the VU Meeter? is there an accessible VU meeter 
>>> plugin?
>> VoiceOver only sees one value for metering. It cannot read VU specifically.
>> 
>>> 2- moving between Open plugins without opening 1 by 1 each time, I tried TO 
>>> press on Target plugin but with no help.
>> By default, only one plug-in window is open at a time. I wouldn't recommend 
>> using more than one plug-in window because you can't see more than one 
>> window at a time and, since you would need to bring up the window Chooser 
>> and make sure the window is the target, simply selecting from the track 
>> selector in one window is more straight-forward.
>> 
>>> 3- how can i write Volume Automation  by section using Keyboard not COntrol 
>>> surface? so i need to add 1 Db volume from bar 10 to bar 20, can i do this 
>>> using Just my keyboard or i should use COntrol surface etc?
>> This is a deceptively complex question because it depends on a number of 
>> factors. To offer an answer that'll work under all circumstances, Make your 
>> selection and enter Auto Latch Trim mode and change the volume fader to +1 
>> dB. Engage the transport and either let it play through the selection or use 
>> the Write To Selection button in the Automation window if it's a long 
>> section that you don't want to play all the way through.
>> 
>>> 4- When i need to load presets from the Ozone9, Pro tools always crash, but 
>>> when voice over is off, it works, is there a solution?
>> See if others can recreate the issue and, if so, open a support ticket with 
>> Izotope.
>> 
>>> 5- what is a good EQ that can do mid side technique? I tried the Ozone 9 
>>> EQ, and it crashes with VOice over.
>> See my response on WhatsApp.
>> 
>>> 
>>> Warm Regards,
>>> Dr/ Ramy Moustafa Saber
>>> Music Producer and Sound Engineer
>>> Music Instructor at: Faculty of Musical Education
>>> Helwan University
>>> 
>>> 
>>>  
>>> 
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Pro Tools Accessibility" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to ptaccess+unsubscr...@googlegroups.com 
>>> .
>>> To view this discussion on the web visit 
>>> https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com
>>>  
>>> .
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com 
>> .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com
>>  
>> .
> 
> 
> -- 
> You received this message because you are subscribed to the Google 

RE: Some problems plz?

[Martin (Punky) Sopart]

Hello Ramy!

Regarding switching plug-ins...
In the plug-in window you'll find pop-up menues for changing insert slots and 
tracks.
That should be fast enough.

Best! / Martin
-Original Message-
From: ptaccess@googlegroups.com  On Behalf Of Ramy 
Moustafa
Sent: Monday, August 8, 2022 9:01 AM
To: ptaccess@googlegroups.com
Subject: Re: Some problems plz?

Hello Mr. Slau:
COncerning the Target plugin:
I do not want to see multible plugins opened at the same window or something, 
all i need is an easy method for switching between them,so, if i have a 
compressor opened, and i need to switch between it and an Eq for instance, each 
time i should hit command ` to move between windows and go and open the other 
one, etc, so is there an easy way for switching?

COncerning Automation:
Thanks so much for your explnation, however, If you do not mind, i need more 
explnation  or an audio demo please, because  can not do all you told me.
Thanks so much for your help

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University





 


On 7 Aug 2022, at 6:39 PM, Slau Halatyn  wrote:




Dear Doctor Ramy,

My responses interspersed below:

On Aug 7, 2022, at 11:25 AM, Ramy Moustafa mailto:ramy.moustaf...@gmail.com> > wrote:



Hello all:
While taking a small mastering course, i am facing some 
problems related to SOme plugins and VOice over, so I will write them here, and 
hope you can help me fixing what am facing.

1- how can we Read inside the VU Meeter? is there an accessible 
VU meeter plugin?

VoiceOver only sees one value for metering. It cannot read VU 
specifically.


2- moving between Open plugins without opening 1 by 1 each 
time, I tried TO press on Target plugin but with no help.

By default, only one plug-in window is open at a time. I wouldn't 
recommend using more than one plug-in window because you can't see more than 
one window at a time and, since you would need to bring up the window Chooser 
and make sure the window is the target, simply selecting from the track 
selector in one window is more straight-forward.


3- how can i write Volume Automation  by section using Keyboard 
not COntrol surface? so i need to add 1 Db volume from bar 10 to bar 20, can i 
do this using Just my keyboard or i should use COntrol surface etc?

This is a deceptively complex question because it depends on a number 
of factors. To offer an answer that'll work under all circumstances, Make your 
selection and enter Auto Latch Trim mode and change the volume fader to +1 dB. 
Engage the transport and either let it play through the selection or use the 
Write To Selection button in the Automation window if it's a long section that 
you don't want to play all the way through.


4- When i need to load presets from the Ozone9, Pro tools 
always crash, but when voice over is off, it works, is there a solution?

See if others can recreate the issue and, if so, open a support ticket 
with Izotope.


5- what is a good EQ that can do mid side technique? I tried 
the Ozone 9 EQ, and it crashes with VOice over.

See my response on WhatsApp.



Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University






 


-- 
You received this message because you are subscribed to the 
Google Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from 
it, send an email to ptaccess+unsubscr...@googlegroups.com 
<mailto:ptaccess+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com
 
<https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com?utm_medium=email_source=footer>
 .





-- 
You received this message because you are subscribed to the Google 
Groups "Pro Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to ptaccess+unsubscr...@googlegroups.com 
<mailto:ptaccess+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com
 
<https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com?utm_medium=email_source=footer>
 .


-- 
You received thi

Re: Some problems plz?

[Ramy Moustafa]

Hello Mr. Slau:
COncerning the Target plugin:
I do not want to see multible plugins opened at the same window or something, 
all i need is an easy method for switching between them,so, if i have a 
compressor opened, and i need to switch between it and an Eq for instance, each 
time i should hit command ` to move between windows and go and open the other 
one, etc, so is there an easy way for switching?

COncerning Automation:
Thanks so much for your explnation, however, If you do not mind, i need more 
explnation  or an audio demo please, because  can not do all you told me.
Thanks so much for your help

Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University




> On 7 Aug 2022, at 6:39 PM, Slau Halatyn  wrote:
> 
> Dear Doctor Ramy,
> 
> My responses interspersed below:
>> On Aug 7, 2022, at 11:25 AM, Ramy Moustafa  wrote:
>> 
>> Hello all:
>> While taking a small mastering course, i am facing some problems related to 
>> SOme plugins and VOice over, so I will write them here, and hope you can 
>> help me fixing what am facing.
>> 
>> 1- how can we Read inside the VU Meeter? is there an accessible VU meeter 
>> plugin?
> VoiceOver only sees one value for metering. It cannot read VU specifically.
> 
>> 2- moving between Open plugins without opening 1 by 1 each time, I tried TO 
>> press on Target plugin but with no help.
> By default, only one plug-in window is open at a time. I wouldn't recommend 
> using more than one plug-in window because you can't see more than one window 
> at a time and, since you would need to bring up the window Chooser and make 
> sure the window is the target, simply selecting from the track selector in 
> one window is more straight-forward.
> 
>> 3- how can i write Volume Automation  by section using Keyboard not COntrol 
>> surface? so i need to add 1 Db volume from bar 10 to bar 20, can i do this 
>> using Just my keyboard or i should use COntrol surface etc?
> This is a deceptively complex question because it depends on a number of 
> factors. To offer an answer that'll work under all circumstances, Make your 
> selection and enter Auto Latch Trim mode and change the volume fader to +1 
> dB. Engage the transport and either let it play through the selection or use 
> the Write To Selection button in the Automation window if it's a long section 
> that you don't want to play all the way through.
> 
>> 4- When i need to load presets from the Ozone9, Pro tools always crash, but 
>> when voice over is off, it works, is there a solution?
> See if others can recreate the issue and, if so, open a support ticket with 
> Izotope.
> 
>> 5- what is a good EQ that can do mid side technique? I tried the Ozone 9 EQ, 
>> and it crashes with VOice over.
> See my response on WhatsApp.
> 
>> 
>> Warm Regards,
>> Dr/ Ramy Moustafa Saber
>> Music Producer and Sound Engineer
>> Music Instructor at: Faculty of Musical Education
>> Helwan University
>> 
>> 
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Pro Tools Accessibility" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to ptaccess+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/8C9D3363-D6A7-4835-B102-C734B725E685%40gmail.com.

RE: Some problems plz?

[Steve Sparrow]

From: ptaccess@googlegroups.com  On Behalf Of Slau 
Halatyn
Sent: Monday, 8 August 2022 2:39 AM
To: PTAccess List 
Subject: Re: Some problems plz?

Dear Doctor Ramy,

My responses interspersed below:
On Aug 7, 2022, at 11:25 AM, Ramy Moustafa 
mailto:ramy.moustaf...@gmail.com>> wrote:


Hello all:
While taking a small mastering course, i am facing some problems related to 
SOme plugins and VOice over, so I will write them here, and hope you can help 
me fixing what am facing.

1- how can we Read inside the VU Meeter? is there an accessible VU meeter 
plugin?
VoiceOver only sees one value for metering. It cannot read VU specifically.


2- moving between Open plugins without opening 1 by 1 each time, I tried TO 
press on Target plugin but with no help.
By default, only one plug-in window is open at a time. I wouldn't recommend 
using more than one plug-in window because you can't see more than one window 
at a time and, since you would need to bring up the window Chooser and make 
sure the window is the target, simply selecting from the track selector in one 
window is more straight-forward.


3- how can i write Volume Automation  by section using Keyboard not COntrol 
surface? so i need to add 1 Db volume from bar 10 to bar 20, can i do this 
using Just my keyboard or i should use COntrol surface etc?
This is a deceptively complex question because it depends on a number of 
factors. To offer an answer that'll work under all circumstances, Make your 
selection and enter Auto Latch Trim mode and change the volume fader to +1 dB. 
Engage the transport and either let it play through the selection or use the 
Write To Selection button in the Automation window if it's a long section that 
you don't want to play all the way through.


4- When i need to load presets from the Ozone9, Pro tools always crash, but 
when voice over is off, it works, is there a solution?
See if others can recreate the issue and, if so, open a support ticket with 
Izotope.


5- what is a good EQ that can do mid side technique? I tried the Ozone 9 EQ, 
and it crashes with VOice over.
See my response on WhatsApp.



Warm Regards,
Dr/ Ramy Moustafa Saber
Music Producer and Sound Engineer
Music Instructor at: Faculty of Musical Education
Helwan University







--
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
ptaccess+unsubscr...@googlegroups.com<mailto:ptaccess+unsubscr...@googlegroups.com>.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com<https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com?utm_medium=email_source=footer>.

--
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to 
ptaccess+unsubscr...@googlegroups.com<mailto:ptaccess+unsubscr...@googlegroups.com>.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com<https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com?utm_medium=email_source=footer>.

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/SY4P282MB1516755066DBD6AC57FE9C3CE7609%40SY4P282MB1516.AUSP282.PROD.OUTLOOK.COM.

Re: Some problems plz?

[Slau Halatyn]

Dear Doctor Ramy,

My responses interspersed below:
On Aug 7, 2022, at 11:25 AM, Ramy Moustafa  wrote:
> 
> Hello all:
> While taking a small mastering course, i am facing some problems related to 
> SOme plugins and VOice over, so I will write them here, and hope you can help 
> me fixing what am facing.
> 
> 1- how can we Read inside the VU Meeter? is there an accessible VU meeter 
> plugin?
VoiceOver only sees one value for metering. It cannot read VU specifically.

> 2- moving between Open plugins without opening 1 by 1 each time, I tried TO 
> press on Target plugin but with no help.
By default, only one plug-in window is open at a time. I wouldn't recommend 
using more than one plug-in window because you can't see more than one window 
at a time and, since you would need to bring up the window Chooser and make 
sure the window is the target, simply selecting from the track selector in one 
window is more straight-forward.

> 3- how can i write Volume Automation  by section using Keyboard not COntrol 
> surface? so i need to add 1 Db volume from bar 10 to bar 20, can i do this 
> using Just my keyboard or i should use COntrol surface etc?
This is a deceptively complex question because it depends on a number of 
factors. To offer an answer that'll work under all circumstances, Make your 
selection and enter Auto Latch Trim mode and change the volume fader to +1 dB. 
Engage the transport and either let it play through the selection or use the 
Write To Selection button in the Automation window if it's a long section that 
you don't want to play all the way through.

> 4- When i need to load presets from the Ozone9, Pro tools always crash, but 
> when voice over is off, it works, is there a solution?
See if others can recreate the issue and, if so, open a support ticket with 
Izotope.

> 5- what is a good EQ that can do mid side technique? I tried the Ozone 9 EQ, 
> and it crashes with VOice over.
See my response on WhatsApp.

> 
> Warm Regards,
> Dr/ Ramy Moustafa Saber
> Music Producer and Sound Engineer
> Music Instructor at: Faculty of Musical Education
> Helwan University
> 
> 
>  
> 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Pro Tools Accessibility" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to ptaccess+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/ptaccess/82D82B65-3265-49F7-A19D-D58CAC1BF5B4%40gmail.com
>  
> .

-- 
You received this message because you are subscribed to the Google Groups "Pro 
Tools Accessibility" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to ptaccess+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/ptaccess/401EC31D-9799-4599-94B5-92EDE1374B9F%40gmail.com.