Too often QGIS 2.5 weekly (it happens in 2.4 too) tends to freeze while drawing
the layers. It normally happens when I move around or zoom out, but I think it
can happen when displaying a layer after loading it). So I guess it has
something to do with drawing data or accessing data from the sour
yes report
any additional infromation there.
[1] http://hub.qgis.org/issues/11141
Bernhard
Am 22.09.2014 09:55, schrieb Casper Børgesen (CABO):
> Too often QGIS 2.5 weekly (it happens in 2.4 too) tends to freeze
> while drawing the layers. It normally happens when I move around or
> zo
hope to be
able to see the messages added when QGIS stops responding.
Regards, Casper
-Original Message-
From: Bernhard Ströbl [mailto:bernhard.stro...@jena.de]
Sent: 22. september 2014 10:39
To: Casper Børgesen (CABO); qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] QGIS
rs in parallel
using many CPU cores"
There seem to be issues with the multi-threaded renderer, but apparently they
are very difficult to reproduce and debug.
Fortunately one can very easily disable multi-threade rendering until the
issues are solved.
Andreas
Am 22.09.2014 08:24, schrieb Ca
@lists.osgeo.org
[mailto:qgis-developer-boun...@lists.osgeo.org] On Behalf Of Matthias Kuhn
Sent: 22. september 2014 11:06
To: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] QGIS sometimes freezes in Windows 7 x64
Hi Casper
On 22.09.2014 10:24, Casper Børgesen (CABO) wrote:
> I can see
eloper-boun...@lists.osgeo.org] On Behalf Of Casper Børgesen
(CABO)
Sent: 22. september 2014 11:26
To: Matthias Kuhn; qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] QGIS sometimes freezes in Windows 7 x64
Hi Matthias.
I have tried DebugView and shortly after QGIS stopped responding. It gave m
Message-
From: Matthias Kuhn [mailto:matthias.k...@gmx.ch]
Sent: 22. september 2014 13:36
To: Casper Børgesen (CABO); qgis-developer@lists.osgeo.org
Subject: Re: FW: [Qgis-developer] QGIS sometimes freezes in Windows 7 x64
Hi Casper,
On 22.09.2014 13:16, Casper Børgesen (CABO) wrote:
> [10
I have an inexperienced QGIS user who needed to draw some simple line strings.
She created a new shapefile layer (line type), enabled editing and used the
"Add Feature" button to draw a line string.
- She didn't right click to finished the feature when she was done!
She saved the alte
ovember 2014 13:26
To: Jonathan Moules; Casper Børgesen (CABO); qgis-developer
Subject: Re: [Qgis-developer] Behaviour when create new features
> b)No warning that the edited features hadn’t been “finished” when saving
> and/or when disabling editing.
> (2.6 Testing indicates th
Hi.
I'm just wondering if the weekly release of QGIS for Windows has been stopped?
I haven't seen a new release since November 17.
Regards, Casper
___
Qgis-developer mailing list
Qgis-developer@lists.osgeo.org
http://lists.osgeo.org/mailman/listinfo/qg
I have downloaded the lastest QGIS 2.7.0-4 weekly release (26-Jan-2015 05:02)
for Windows x64 and after installing (and uninstalling my previous weekly
edition) I cannot start QGIS due to:
qgis-dev-bin.exe - System Error
The program can't start because qwt5.dll is missing from your computer. Try
Hi!
I have previously been able to use the QGIS plugin QuickWKT to conveniently
visualize geometries in QGIS. This has worked well using both 2D and 3D data
where only the 2D part has been visualized. Recently I haven't been able to
insert WKT polygons with Z-values.
I have tried the following
I have some issues with QuickWKT and Zoom to Layer Extent.
Example WKT: POLYGON ((518036.41 6264805.47,518056.41 6264805.47,518056.41
6264825.47,518036.41 6264825.47,518036.41 6264805.47))
When I right click the layer and select Zoom to Layer Extent, it zooms very far
out even though I can manu
Hi!
I get the following error massage from time to time when using the ValueTool
plugin. It seems like it happens when I add or remove a layer:
An error has occured while executing Python code:
Traceback (most recent call last):
File "C:/Users/my_user/.qgis2/python/plugins\valuetool\valuewidg
n entering the
manager. Anyway I hope the update works :)
Regards, Casper
From: Etienne Tourigny [mailto:etourigny@gmail.com]
Sent: 3. april 2014 16:16
To: Casper Børgesen (CABO)
Cc: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] ValueTool error
This has been reported a few tim
Hi everyone
I was just wondering about spatial indices for shape files in QGIS. If I edit a
shapefile with an index (QIX), lets say move a point, and then save the layer.
What will happen to the spatial index?
If I create a point shape file I QGIS 2.18.1, create a spatial index, add a
point, s
Hi Even
Thanks for clarifying this. I had hoped this was just a bug instead of a not
implemented feature :)
Regards, Casper
From: Even Rouault [mailto:even.roua...@spatialys.com]
Sent: 16. december 2016 10:59
To: qgis-developer@lists.osgeo.org
Cc: Casper Børgesen (CABO)
Subject: Re: [Qgis
Hi all
I have a simple LINEARRING which I would like to use for processing:
LINEARRING (592457.52 6227645.26,592454.37 6227645.98,592448.43
6227647.35,592454.15 6227672.3,592428.66 6227678.14,592422.51
6227651.33,592412.78 6227653.56,592419.05 6227680.86,592424.64
6227691.08,592465.86 6227681.
Hi,
I'm trying to build QGIS 2.18.3 (the latest source in release_2.18) in Windows
7 (x64) using VC++ express 2010 and I am getting the error message:
Error C3861: 'round': Identifier not found
It happens in qgsmaprenderercustompainterjob.cpp when building qgis_core
(debug).
What can I do
Hi all
I am looking for information regarding the issue:
http://hub.qgis.org/issues/16087
According to Giovanni Manghi, the issue has been fixed but I am looking for
information about which versions has been fixed. It might be just in front of
me, but I cannot find a patch in the repository th
Hi!
I have an MS SQL database (not spatial) from which I would like to fetch and
update data from my python plugin.
My question is:
Is it possible with a "normal" QGIS installation to connect to an MS SQL
database from python, so I'll be able to execute various SELECT and UPDATE
statements?
I
Hi!
I'm using QGIS master x64 from OSGeo4W, and I'm experiencing crashes (with
minidumps) each time I exit QGIS (including if I just open and closes QGIS).
I don't know how to extract a stack trace from the minidump (if it has one?)
and renaming the ".qgis2" folder doesn't help.
I have just up
l.com]
Sent: 28. september 2015 11:18
To: Salvatore Larosa
Cc: Casper Børgesen (CABO); qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] QGIS Master crashes on exit
On 28 September 2015 at 18:35, Salvatore Larosa wrote:
> Hi Casper,
>
> On Mon, Sep 28, 2015 at 10:04 AM, C
I have a strange situation. I host two different WMS layers on an internal
GeoServer 2.8.2 (type is ImagePyramid) and both layers look fine when
previewing them in the GeoServer Layer Preview. I use QGIS Master x64 (latest
nightly build from OSGeo4w) to access the layers.
One of them gets added
, Casper
From: Pedro Venâncio [mailto:pedrongvenan...@gmail.com]
Sent: 15. februar 2016 10:39
To: Casper Børgesen (CABO)
Cc: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] WMS provider: Cannot calculate extent
Hi Casper,
Just clean the WMS cache on QGIS: Settings -> Options -> N
Hi!
I have a user who constantly get a yellow warning from QGIS when he enables
editing on set of specific shape files. The message is:
DigitizingTools: Amend Line is disabled because layer CRS and project CRS do
not match!
The project CRS is EPSG:25832. The shape file has the following .prj f
RS is created with the projection information given in the prj file.
Bernhard
Am 08.04.2016 um 10:10 schrieb Casper Børgesen (CABO):
> Hi!
>
> I have a user who constantly get a yellow warning from QGIS when he enables
> editing on set of specific shape files. The message is:
>
>
working shape file (see the first mail), but QGIS still displays the warning.
Regards, Casper
-Original Message-
From: Bernhard Ströbl [mailto:bernhard.stro...@jena.de]
Sent: 8. april 2016 11:38
To: Casper Børgesen (CABO); qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer
ssage-
From: Bernhard Ströbl [mailto:bernhard.stro...@jena.de]
Sent: 8. april 2016 12:55
To: Casper Børgesen (CABO); qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] Warning from DigitizingTools about CRS mismatch
Hi Casper,
I meant the CRS set in the layer's properties for th
7 skrev Casper Børgesen (CABO):
Hi Bernhard
I do follow your suggestions and they make perfectly sense. This is a warning
and I can probably safely disregard it in this case. I'm more curious to
discover why two computers using the same OS and QGIS version seems to handle
the CRS differe
Hi
I'm playing around with the QGIS (d01bfd1) snap functionalities in python and
I'm trying to get it return all the segments in the vicinity of the point of
interest.
sl = QgsSnapper.SnapLayer()
sl.mLayer = canvas.currentLayer()
sl.mTolerance = 50
sl.snapTo = QgsSnapper.SnapToS
Hi Martin
Great and thanks for the heads up. I will look into QgsPointLocator and see if
I can get it to work with better results :)
Regards, Casper
-Original Message-
From: Martin Dobias [mailto:wonder...@gmail.com]
Sent: 11. august 2016 14:22
To: Casper Børgesen (CABO)
Cc: qgis
ready.
Regards, Casper
-Original Message-
From: Qgis-developer [mailto:qgis-developer-boun...@lists.osgeo.org] On Behalf
Of Casper Børgesen (CABO)
Sent: 11. august 2016 14:27
To: Martin Dobias
Cc: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] Python: How to allow for more results
expanding...
Hopefully I'm now a step closer to being QGIS 3.0 compliant :)
Regards, Casper
-Original Message-
From: Martin Dobias [mailto:wonder...@gmail.com]
Sent: 11. august 2016 18:10
To: Casper Børgesen (CABO)
Cc: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] Python
ailto:qgis-developer-boun...@lists.osgeo.org] On Behalf
Of Casper Børgesen (CABO)
Sent: 12. august 2016 10:02
To: Martin Dobias
Cc: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] Python: How to allow for more results using
QgsSnapper.snapMapPoint(...)
Hi Martin
Thanks for the referen
that you go through the data provider. Perhaps that is not the
best way to go anymore, or does it depend on what you want to do?
Regards, Casper
-Original Message-
From: Martin Dobias [mailto:wonder...@gmail.com]
Sent: 12. august 2016 13:21
To: Casper Børgesen (CABO)
Cc: qgis-developer
: Casper Børgesen (CABO)
Cc: Martin Dobias; qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] Python: How to allow for more results using
QgsSnapper.snapMapPoint(...)
Hi Casper,
this page may need some update. Not many pythonistas are currently available to
improve the PyQGIS Cookbook
Hi Calvin
I’m facing the same problem and before I go home I just wanted to ask if you
found a solution to this problem?
Regards, Casper
From: Qgis-developer [mailto:qgis-developer-boun...@lists.osgeo.org] On Behalf
Of C Hamilton
Sent: 30. juni 2016 20:45
To: qgis-developer
Subject: [Qgis-dev
[mailto:wonder...@gmail.com]
Sent: 18. august 2016 07:32
To: Casper Børgesen (CABO)
Cc: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] Python: How to allow for more results using
QgsSnapper.snapMapPoint(...)
On Fri, Aug 12, 2016 at 2:26 PM, Casper Børgesen (CABO) wrote:
>
> S
Hi Calvin
It does. Thanks a lot!
Regards, Casper
From: C Hamilton [mailto:adenacult...@gmail.com]
Sent: 17. august 2016 16:47
To: Casper Børgesen (CABO)
Cc: qgis-developer
Subject: Re: [Qgis-developer] Problems with using QGIS Custom Widgets
Yes I did. When you save the file it uses the C
I have a shape file in QGIS (2.16.1 and master 0a07fee) with one polygon and
around 20 attributes. According to the TableManager plugin two of these fields
have the type "String(1)" and outside QGIS I can tell that their value is HEX
20 (a space character).
After changing the geometry a bit I s
I have added a layer to the layer tree and now I want to remove it from the
layer tree:
self.layer = self.create_my_layer()
QgsProject.instance().layerTreeRoot().insertLayer(0, self.layer)
QgsProject.instance().layerTreeRoot().removeLayer(self.layer)
But it seems like my layer has been destroy
Hi Alvaro,
Your idea looks very promising and I could probably think of a situation or two
where this would be very useful.
I wonder though, why only allow a map to sync with the other maps and not sync
to a specific map? If I could sync to a specific map, I would be able to setup
four maps wh
Hi,
I am trying to validate a few geometry layers using "Processing/QGIS
geoalgorithms/Vector geometry tools/Check validity" and it immediately fails
each time I try with the following message.
-2147483645 See log for more details
The processing log contains the following:
Uncaught er
Ahh forgot to mention which QGIS I am using, it is Master (d3882d5) on Windows
7 x64.
Hi,
I am trying to validate a few geometry layers using "Processing/QGIS
geoalgorithms/Vector geometry tools/Check validity" and it immediately fails
each time I try with the following message.
-2147483
Hi,
I have a point SHAPE layer with 4 points on a line (just to make them easy to
number in this example, and the layer is created in QGIS).
1. Start editing.
2. Delete point number 3.
3. In the python console do the following:
>>> len(list(iface.mapCanvas().currentLayer().
living features?`
Regards, Casper
From: Nathan Woodrow [mailto:madman...@gmail.com]
Sent: 30. august 2016 14:50
To: Casper Børgesen (CABO)
Cc: QGIS Developer Mailing List
Subject: Re: [Qgis-developer] Python and strange results using
layer(.dataProvider()).getFeatures(...)
If you haven't save
hn
Cc: qgis-developer
Subject: Re: [Qgis-developer] Python and strange results using
layer(.dataProvider()).getFeatures(...)
On 30 August 2016 at 23:52, Matthias Kuhn wrote:
> Hi Casper
>
> On 08/30/2016 02:59 PM, Casper Børgesen (CABO) wrote:
>> Hi Nathan
>>
>>
>&g
Hello,
I am trying to follow Tim's blog post[1] on how to build QGIS using QtCreator
on linux. The blog post is a couple of years old now and I have found a couple
of replaced/extra packages I needed to install to get to the error below. I am
at the step where I am using the CMake Wizard to run
:15
To: Casper Børgesen (CABO); qgis-developer
Subject: Re: [Qgis-developer] QtCreator and QGIS on ubuntu
On 01-09-16 08:09, Casper Børgesen (CABO) wrote:
>
> If I haven’t already got the QCA dependency, which library should I install?
>
Guessing you are building master_2 or other 2.
t: Re: [Qgis-developer] QtCreator and QGIS on ubuntu
On 01-09-16 10:57, Casper Børgesen (CABO) wrote:
> Hi Richard
>
> That did it, thanks a lot for your fast reply :)
>
> For my own later reference, how do I determine which package I need? In this
> case QCA -> libqca2-dev?
Hello,
I am trying to setup a keyboard shortcut for a method in my plugin and was
looking at the following code snippet:
http://docs.qgis.org/testing/en/docs/pyqgis_developer_cookbook/snippets.html#how-to-call-a-method-by-a-key-shortcut
In 2014 dakcarto wrote a similar snippet at GIS.SE:
http:
Hello,
I'm trying to use the Georeferencer plugin in QGIS but when I click
Raster/Georeferencer/Georeferencer to open the tool, nothing happens. I get no
error message nor any message in the log-message-panel.
I have QGIS 2.16.1 installed from the QGIS webpage and QGIS master + 2.14.6 LTR
from
Hi,
I was trying to use python to add 3 identical points to a QgsRubberBand using
.addPoint(point) and was wondering why I got a core dump when I was trying to
move the third point to a new position. Looking into the code I found the
following (line 172 in qgsrubberband.cpp):
if ( mPoints.at
Hi,
I am working on a python plugin for QGIS where the user can interact with the
data in a polygon memory layer.
When the user clicks on a position in the map, the plugin look up a feature at
that position in the memory layer. If a feature was found it will be deleted
and afterwards a new one
Hi
I'm trying to build QGIS on Windows 7 (x64) using the the steps provided in [1]
with small adjustments from [2]. My objective is to be able to build a QGIS
instance so that I can debug and understand the calls made to QGIS from my
python plugins. In other words, I am not trying to build my o
-boun...@lists.osgeo.org] On Behalf
Of Jürgen E. Fischer
Sent: 17. oktober 2016 20:12
To: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] Building and debugging QGIS on Windows x64
Hi Casper,
On Mon, 17. Oct 2016 at 14:00:48 +, Casper Børgesen (CABO) wrote:
> Error 6610error
Hi Frits
Thank you for your answer and your guidance. I used Jürgens advise and used the
spatialite_i.lib instead and I got a bit further. I am now also able to run and
debug a QGIS session, but I cannot use python either, which I really want to.
I am using master_2 and building QGIS using "Rel
asper,
On Wed, 19. Oct 2016 at 06:21:40 +, Casper Børgesen (CABO) wrote:
> Thank you for your answer and your guidance. I used Jürgens advise and
> used the spatialite_i.lib instead and I got a bit further. I am now
> also able to run and debug a QGIS session, but I cannot use python
debugging QGIS on Windows x64
Hi Casper,
On Wed, 19. Oct 2016 at 07:51:54 +, Casper Børgesen (CABO) wrote:
> Thanks for the clarification regarding "debug"/"RelWithDebInfo", now I
> know that I can just continue debugging with "RelWithDebInfo".
> W
1:40 +, Casper Børgesen (CABO) wrote:
> Thank you for your answer and your guidance. I used Jürgens advise and used
> the spatialite_i.lib instead and I got a bit further. I am now also able to
> run and debug a QGIS session, but I cannot use python either, which I really
> want to.
>
Hi Frits
Great to hear that you have tracked the incorrect folder setting. I will try it.
For the sake of the two of us, we seem to be going okay now. But I would like
to move on to a place where downloading the QGIS source code, downloading and
installing a few software packages, and at last f
Hi
I am looking at implementing undo functionality in my plugins but so far I have
only found the option to use beginEditCommand for each layer.
If a user click a button in a plugin which introduce changes to several layers,
is it then possible to do all the changes in one transaction so when t
Hi,
The QGIS website displays the new release of QGIS 2.18 as available for
download, but both the Windows x86 and the x64 files are not found. LTS
versions seems available.
I couldn't see any notice on the list, so here is my notice :)
Regards, Casper
___
Hi Nathan, yes, it is working now! Thanks to the fairy ☺
/Casper
From: Nathan Woodrow [mailto:madman...@gmail.com]
Sent: 24. oktober 2016 12:58
To: Casper Børgesen (CABO)
Cc: qgis-developer@lists.osgeo.org
Subject: Re: [Qgis-developer] QGIS 2.18 for Windows unavailable for download?
Hey,
They
Hi!
I was trying to visualize a linestring using the QgsGeometryRubberBand and had
QGIS crashing as soon as the rubber band was being drawn. It looks like the
geometry is being corrupted somewhere.
If I draw a polygon it works fine:
from qgis.core import *
from qgis.gui import *
rb = QgsGeomet
Hi Nyall
Thanks for fixing #15505 it works nicely now and sorry it took me some time to
get back to the issue and test it out.
I was wondering if it is possible to see somehow which QGIS releases has the
current fix in it?
Regards, Casper
___
Qgis-
Hi Harrissou
Ahh now I see it, it is of course very simple ☺
Thanks for the explanation and the revision check.
Regards, Casper
From: DelazJ [mailto:del...@gmail.com]
Sent: 3. november 2016 21:12
To: Casper Børgesen (CABO)
Cc: Nyall Dawson (nyall.daw...@gmail.com); qgis-developer
68 matches
Mail list logo