Re: [Ql-Users] EasyMenu

[François Van Emelen via Ql-Users]

Op 3/04/2019 om 23:52 schreef Marcel Kilgus via Ql-Users:

During the German ZX meeting that has become some sort of last refuge
for us QL fans, too, a new EasyMenu was created, fixing a small bug
that resulted in long startup time on the Q68. I don't think the bug
has other ill effects, but updating certainly will not do any harm:

https://www.kilgus.net/smsqe/easyptr/

Marcel

___
QL-Users Mailing List



thanks.

François Van Emelen



___
QL-Users Mailing List

Re: [Ql-Users] EasyMenu

[Marcel Kilgus via Ql-Users]

Derek wrote:
> EasyMenu has always been slow to startup on all QL platforms.

It takes about 2 seconds on an unexpanded Minerva QL, so I wouldn't
say this was generally the case.

It took 20 seconds or so on a Q68, which was not the Q68's fault at
all but a mere coincidence.

All the best, Marcel

___
QL-Users Mailing List

Re: [Ql-Users] EasyMenu

[Derek via Ql-Users]

Hi Marcel,

EasyMenu has always been slow to startup on all QL platforms.

I thank you for the bug fix.

Regards,

Derek

On 3 April 2019 22:52:04 BST, Marcel Kilgus via Ql-Users 
 wrote:
>During the German ZX meeting that has become some sort of last refuge
>for us QL fans, too, a new EasyMenu was created, fixing a small bug
>that resulted in long startup time on the Q68. I don't think the bug
>has other ill effects, but updating certainly will not do any harm:
>
>https://www.kilgus.net/smsqe/easyptr/
>
>Marcel
>
>___
>QL-Users Mailing List
___
QL-Users Mailing List

[Ql-Users] EasyMenu

[Marcel Kilgus via Ql-Users]

During the German ZX meeting that has become some sort of last refuge
for us QL fans, too, a new EasyMenu was created, fixing a small bug
that resulted in long startup time on the Q68. I don't think the bug
has other ill effects, but updating certainly will not do any harm:

https://www.kilgus.net/smsqe/easyptr/

Marcel

___
QL-Users Mailing List

Re: [Ql-Users] EasyMenu

[Giorgio Garabello via Ql-Users]

No, it's freeware


Mail
priva di virus. www.avast.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2018-03-07 11:27 GMT+01:00 simon629--- via Ql-Users <
ql-users@lists.q-v-d.com>:

> Hi everyone can you help me is EasyMenu still payware OK Thanks
>
> simon629Simon Foster
> ___
> QL-Users Mailing List
>
___
QL-Users Mailing List

Re: [Ql-Users] EasyMenu

[simon629--- via Ql-Users]

Hi everyone can you help me is EasyMenu still payware OK Thanks 

simon629Simon Foster
___
QL-Users Mailing List

Re: [Ql-Users] EASYMENU - Not so easy!

[Dilwyn Jones]

This is an outside chance only,. to be thught of a a last resort.

Have you resized any component such as an inf window containing a text 
object without first resizing the text bject? The error meesage you see is 
not what i would expect in this case, but i have had this happen that i 
resized something and it either fails to load, or laded but only displaying 
items up the point of error.


With specialist knowledge it might be possible to patch such things, but 
this is definitely not a job for the inexperienced. As Marcel suggested 
defining a new menu from scratch might actually  be quicker than hunting for 
vague errors like this.


(apologies for typos, i have a problem with this keyboard)

Dilwyn

-Original Message- 
From: John Gilpin

Sent: Monday, May 09, 2016 6:04 PM
To: ql-users
Subject: [Ql-Users] EASYMENU - Not so easy!

Some weeks ago, I asked if anyone could assist me with a problem I am
having, - The menu I developed about a year ago in EasyMenu, will not go
back into the programme giving an error report - "Menu file is too big
to go into the available Work Space! Press any Key.

The only suggestion I had was to try using MenuConfig on the EASYMENU
programme and make the Work Space as large as it will go. I have done
this but the only options available in MenuConfig for Work Space are:-
"none"  "small" and "big". Having tried all three options, I am still
unable to get the menu file back into the prog so that I can edit it.

My only solution seems to be to develop the Menu again - What a bind!!

Has anyone got any serious answers and/or suggestions?

Thanks in anticipation.:-[

Kind Regards,

John Gilpin.
QUANTA Membership Secretary
and QUANTA Treasurer
membership @quanta.org.uk
treasurer @quanta.org.uk

___
QL-Users Mailing List


-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7596 / Virus Database: 4568/12199 - Release Date: 05/09/16 




-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7596 / Virus Database: 4568/12204 - Release Date: 05/10/16

___
QL-Users Mailing List

Re: [Ql-Users] EASYMENU - Not so easy!

[Bob Spelten]

Op Mon, 09 May 2016 19:04:06 +0200 schreef John Gilpin  
:


Some weeks ago, I asked if anyone could assist me with a problem I am  
having, - The menu I developed about a year ago in EasyMenu, will not go  
back into the programme giving an error report - "Menu file is too big  
to go into the available Work Space! Press any Key.


The only suggestion I had was to try using MenuConfig on the EASYMENU  
programme and make the Work Space as large as it will go. I have done  
this but the only options available in MenuConfig for Work Space are:-   
"none"  "small" and "big". Having tried all three options, I am still  
unable to get the menu file back into the prog so that I can edit it.


My only solution seems to be to develop the Menu again - What a bind!!

Has anyone got any serious answers and/or suggestions?

Thanks in anticipation.:-[

In your original email you said to be working with EasyPTR4 but the  
options "big, small, none" are for EasyMenu v3 and not v4.

So trying to fit a v4 menu into a v3 EasyMenu may not be a good thing.
In v4 you can specify width and height up to 4096 (as Francois suggested)  
although I am not sure what happens if you config more than the screen  
allows, probably v4 addapts.



Bob

--
The BSJR QL software site at: http://members.upc.nl/b.spelten/ql/
___
QL-Users Mailing List

Re: [Ql-Users] EASYMENU - Not so easy!

[Timothy Swenson]

John,

Here is a couple of suggestions that I have:

1.  Try EasyMenu in a different environment.  If running on a BBQL, try 
it with QPCII or SMSQmulator.  You might be different behavior.


2.  Post the menu file somewhere and see if someone else can reproduce 
the problem.


Tim Swenson
___
QL-Users Mailing List

Re: [Ql-Users] EASYMENU - Not so easy!

[François Van Emelen]

Op 9/05/2016 om 19:04 schreef John Gilpin:
Some weeks ago, I asked if anyone could assist me with a problem I am 
having, - The menu I developed about a year ago in EasyMenu, will not 
go back into the programme giving an error report - "Menu file is too 
big to go into the available Work Space! Press any Key.


The only suggestion I had was to try using MenuConfig on the EASYMENU 
programme and make the Work Space as large as it will go. I have done 
this but the only options available in MenuConfig for Work Space 
are:-  "none"  "small" and "big". Having tried all three options, I am 
still unable to get the menu file back into the prog so that I can 
edit it.


My only solution seems to be to develop the Menu again - What a bind!!

Has anyone got any serious answers and/or suggestions?

Thanks in anticipation.:-[

Kind Regards,

John Gilpin.
QUANTA Membership Secretary
and QUANTA Treasurer
membership @quanta.org.uk
treasurer @quanta.org.uk

___
QL-Users Mailing List



Hi,

Which file are you trying to configurate? Easymenu_exe? I can't find the 
options  "none"  "small" and "big".


If I do understand your problem correctly, you are trying to load a menu 
designed with Easymenu_exe that seems to be too large (too wide and or 
too high) for your window resolution.


Did you try this?

1) in Windows: set screen resolution to maximum value. Mine is 1920x1080 
value)


2) in Windows: configurate QPC2  set display mode to maximum value. Mine 
is 1920x1080


3) in QPC 2: with Menuconfig (Jochen Merz) or another tool: configurate 
'easymenu_exe' . Set window size to 4096x4096 (the highest value).


In Easymenu_exe: use the resize sprite to maximize the window.

HTH

François Van Emelen





___
QL-Users Mailing List

Re: [Ql-Users] EASYMENU - Not so easy!

[Marcel Kilgus]

John Gilpin wrote:
> Some weeks ago, I asked if anyone could assist me with a problem I am 
> having, - The menu I developed about a year ago in EasyMenu, will not go
> back into the programme giving an error report - "Menu file is too big
> to go into the available Work Space! Press any Key.

Send me the file. But no promises, properly debugging this probably
takes more time than recreating the menu from scratch, but I'll have a
quick look nonetheless.

Marcel

___
QL-Users Mailing List

[Ql-Users] EASYMENU - Not so easy!

[John Gilpin]

Some weeks ago, I asked if anyone could assist me with a problem I am 
having, - The menu I developed about a year ago in EasyMenu, will not go 
back into the programme giving an error report - "Menu file is too big 
to go into the available Work Space! Press any Key.


The only suggestion I had was to try using MenuConfig on the EASYMENU 
programme and make the Work Space as large as it will go. I have done 
this but the only options available in MenuConfig for Work Space are:-  
"none"  "small" and "big". Having tried all three options, I am still 
unable to get the menu file back into the prog so that I can edit it.


My only solution seems to be to develop the Menu again - What a bind!!

Has anyone got any serious answers and/or suggestions?

Thanks in anticipation.:-[

Kind Regards,

John Gilpin.
QUANTA Membership Secretary
and QUANTA Treasurer
membership @quanta.org.uk
treasurer @quanta.org.uk

___
QL-Users Mailing List