I think vqadmin has had issues for a long time. I don't use it anymore
but use qmailadmin or command line
On 3/17/2018 9:52 AM, Henry wrote:
Hello,
I use vqadmin to create a domain if the domain/user already
exists, supposed will display a error such as
"Domain already exists"
"User
Noriyuki,
1) Why are you creating source and binary on CentOS 6 with the --with
cnt5064 (CentOS 5) option?
2) Why are you creating CentOS 6 source and binary with a CentOS 5 spec
file?
3) You can also get rid of the --target x86_64 option if you're
already on an x86_64 architecture, right?
For
Hi, Eric
Thank you for your advice.
I did not know the qt.src version.
As you know that I checked spec file then there is no cnt6064 route.
So, I tried cnt5064 by the way.
This was easy way, I just change the Buildrequire... etc.
Anyway I will try to use qt.src.rpm
Other SRPMS has many modified
Noriyuki,
I hope everything works out for you.
EricB.
On 7/8/2015 6:49 PM, NoriyukiHayashi wrote:
Hi, Eric
Thank you for your advice.
I did not know the qt.src version.
As you know that I checked spec file then there is no cnt6064 route.
So, I tried cnt5064 by the way.
This was easy
The issues surrounding making the current CentOS 5 build of QMT work on
COS6 are increasing...
Firstly, let me address a major issue: 32-bit vs. 64-bit. These are the
20-teens folks... IMHO, 32-bit hardware is outdated. Of course, if you
have 32-bit hardware laying around, it is perfectly
Modifying toaster.conf as you suggested solved the problem.
Thank you!
Istvan
On 10.08.2013 19:41, xaf wrote:
|-- Istvan Köpe, le 10/08/2013 10:20, a dit :
The problem is that the Qmail Toaster Admin page loads without any
fields or buttons.
Can you tell me where to start troubleshooting
Hi,
Can you please send me the procedure to install qmailtoaster in centos 6.4
x86 with step by step.
On Sun, Aug 11, 2013 at 3:28 PM, Istvan Köpe ist...@advancetech.ro wrote:
Modifying toaster.conf as you suggested solved the problem.
Thank you!
Istvan
On 10.08.2013 19:41, xaf wrote:
I started the installation based on
this procedure: http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg31759.html
Of course it didn't work flawless, but I troubleshooted each
package with problems one by one.
Unfortunately I didn't take notes what
Hi;
this is a warning, not an error. Can you try firefox or internet explorer ?
2013/8/10 Istvan Köpe ist...@advancetech.ro
In the error_log I found only this:
PHP Notice: Undefined index: file in
/usr/share/toaster/include/admin.inc.php on line 5
But I've seen this error also on
|-- Istvan Köpe, le 10/08/2013 10:20, a dit :
The problem is that the Qmail Toaster Admin page loads without any
fields or buttons.
Can you tell me where to start troubleshooting this problem?
change /etc/httpd/conf/toaster.conf
add
php_value short_open_tag On
under
Directory
Il 09/08/2012 10:21, Athanasios Mademlis ha scritto:
Hello to the list,
I am trying to build the vqadmin-toaster-2.3.7-1.4.1.src.rpm in a
CentOS 6.3 machine
I receive the following error during configuration.
checking build system type... Invalid configuration
Your welcome but it was due to Jake I knew it
best wishes
Tony White
Yea Computing Services
http://www.ycs.com.au
4 The Crescent
Yea
Victoria
Australia 3717
Telephone No's
VIC : 03 9008 5614
FAX : 03 9008 5610 (FAX2Email)
IMPORTANT NOTICE
This communication including any file
Found it!
If you look at the database for vpopmail, the domain that will not shows will have something like 254146493926 for the user
data field. Change this to 0 and the domain will be visible again.
This is from Jake earlier this year.
best wishes
Tony White
On 22/03/2012 07:21,
Found it!
If you look at the database for vpopmail, the domain that will not shows
will have something like 254146493926 for the user
data field. Change this to 0 and the domain will be visible again.
This is from Jake earlier this year.
best wishes
Tony White
On 22/03/2012
Found it!
If you look at the database for vpopmail, the domain that will not shows
will have something like 254146493926 for the user
data field. Change this to 0 and the domain will be visible again.
This is from Jake earlier this year.
best wishes
Tony White
On 22/03/2012
If I recall, yes it is!
best wishes
Tony White
On 22/03/2012 14:58, ebr...@whitehorsetc.com wrote:
Found it!
If you look at the database for vpopmail, the domain that will not shows
will have something like 254146493926 for the user
data field. Change this to 0 and the domain will be
Tony,
Thanks for the reminder, it fixed an issue with my personal server. It
dawned on me when you posted it that it was what was wrong with my
account. Changed the value and boom it works.
Thanks!
CJ
On 03/21/2012 09:21 PM, Tony White wrote:
If I recall, yes it is!
best wishes
Tony
On 08/06/2011 05:08 AM, Ismail Ozatay wrote:
[Sat Aug 06 12:01:13 2011] [error] [client x.x.x.x]
3b40013000-3b40015000 rw-p 3b40013000 00:00 0 , referer:
http://mail.domain.org/mail/vqadmin/toaster.vqadmin
[Sat Aug 06 12:01:13 2011] [error] [client x.x.x.x]
3b4060-3b40602000 r-xp
On 06.08.2011 15:53, Jake Vickers wrote:
On 08/06/2011 05:08 AM, Ismail Ozatay wrote:
[Sat Aug 06 12:01:13 2011] [error] [client x.x.x.x]
3b40013000-3b40015000 rw-p 3b40013000 00:00 0 , referer:
http://mail.domain.org/mail/vqadmin/toaster.vqadmin
[Sat Aug 06 12:01:13 2011] [error] [client
I'll try to take a look at this if I have time in the next few weeks. Due to
the necessary complexity of something like this, though, it'll probably be
best to read in information from the users database, so it might be a
python/perl script rather than bash.
Justice London
Systems Administrator
Justice London wrote:
I'll try to take a look at this if I have time in the next few weeks. Due to
the necessary complexity of something like this, though, it'll probably be
best to read in information from the users database, so it might be a
python/perl script rather than bash.
Sounds
Jake Vickers wrote:
Jake Vickers wrote:
Just wanted to remind everyone that there are still 3 days to vote on
how we'll handle vqadmin going forward.
You can vote by going to http://survey.qmailtoaster.com/
So far the CLI option is still winning, with Leave it alone and
Make it optional in a
Jake Vickers wrote:
Just wanted to remind everyone that there are still 3 days to vote on
how we'll handle vqadmin going forward.
You can vote by going to http://survey.qmailtoaster.com/
So far the CLI option is still winning, with Leave it alone and
Make it optional in a tie for second
Robert S Galloway wrote:
Howdy,
I just installed a new server with the QMT-ISO disc and I'm having
trouble adding a domain to the server with VQAdmin. The install is
default, but I have done a qtp-restore with data from my old server.
Basically, when I add the domain with VQAdmin,
David Campbell wrote:
it sounds like the installation didn't complete properly, I myself use
the QMT-ISO package and it works fine for my machines (I recently
installed the latest one) I wouldn't trust that installation if those
folders were missing and I'd say reformat and try again.
NOTE:
it sounds like the installation didn't complete properly, I myself use the
QMT-ISO package and it works fine for my machines (I recently installed the
latest one) I wouldn't trust that installation if those folders were missing
and I'd say reformat and try again.
NOTE: you do know that the
James Ecker wrote:
Thank you everyone for your help. I think I have gotten a little
closer to fixing the problem. When I run a vdominfo I get the
following problem:
domain: test.com
uid:89
gid:89
dir:/home/vpopmail/domains/test.com
Segmentation fault
After looking this problem
(0) ---+++ killed by SIGSEGV +++
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Sun, 9 Dec 2007 12:37:54
+0100Subject: Re: [qmailtoaster] VQADMIN Problem
You could try a strace vdominfo
It should bail out with some more info.
JP
- Original Message -
From: James Ecker
2007 16:50
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] VQADMIN Problem
Thank you for you reply.
The strace out put from two different domains, one that works and one that
does not work, are shown below.
The only difference I can see is the
--- SIGSEGV (Segmentation
domain data and recreated the table manually
then restored the data, but that did not help.
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Sun, 9 Dec 2007 20:08:54
+0100Subject: RE: [qmailtoaster] VQADMIN Problem
Ok this does not help much for now, but it seems something goes wrong right
the non working domain data and recreated the table
manually then restored the data, but that did not help.
From: [EMAIL PROTECTED]
To: qmailtoaster-list@qmailtoaster.com
Date: Sun, 9 Dec 2007 20:08:54 +0100
Subject: RE: [qmailtoaster] VQADMIN Problem
Did you also check the table dir_control ?
JP
- Original Message -
From: James Ecker
To: qmailtoaster-list@qmailtoaster.com
Sent: Sunday, December 09, 2007 8:45 PM
Subject: RE: [qmailtoaster] VQADMIN Problem
I have looked through the two different mySQL tables, besides
the steps above.
Thank you everyone for all of your help.
From: [EMAIL PROTECTED]: [EMAIL PROTECTED]: Mon, 10 Dec 2007 02:15:19
+0100Subject: Re: [qmailtoaster] VQADMIN Problem
Did you also check the table dir_control ?
JP
- Original Message -
From: James Ecker
To: qmailtoaster-list
Thank you everyone for your help. I think I have gotten a little closer to
fixing the problem. When I run a vdominfo I get the following problem:
domain: test.comuid:89gid:89dir:
/home/vpopmail/domains/test.comSegmentation fault
After looking this problem up on Google, the only
Someone please correct me if I am wrong, but I don't think the
QmailToaster has a vpopmail file.
On Dec 8, 2007 9:40 PM, James Ecker [EMAIL PROTECTED] wrote:
Thank you everyone for your help. I think I have gotten a little closer to
fixing the problem. When I run a vdominfo I get the
Sorry that should have read vpasswd file.
Erik
On Dec 8, 2007 11:11 PM, Erik A. Espinoza [EMAIL PROTECTED] wrote:
Someone please correct me if I am wrong, but I don't think the
QmailToaster has a vpopmail file.
On Dec 8, 2007 9:40 PM, James Ecker [EMAIL PROTECTED] wrote:
Thank you
PROTECTED]
To: qmailtoaster-list@qmailtoaster.com
Subject: Re: [qmailtoaster] VQADMIN Problem
There have been several people report problems with Vqadmin. The
response has most often been that Vqadmin is broken and should not be
used. I'm not sure if your problem is the same but have you tried
Yes, even after I deleted and recreated the same domain I am still not able to
administrator the domain from VQADMIN nor QMAILADMIN. Any other ideas? Date:
Thu, 6 Dec 2007 11:48:18 -0500 From: [EMAIL PROTECTED] To:
qmailtoaster-list@qmailtoaster.com Subject: Re: [qmailtoaster] VQADMIN
Problem
There have been several people report problems with Vqadmin. The response has
most often been that Vqadmin is broken and should not be used. I'm not sure if
your problem is the same but have you tried to create the domain from the
command line?
Phil
-Original message-
From: James
Hi,
there's some kind of bug??? in qmailadmin vs popmail vs vqadmin that causes
the users field int the dir_control table in vpopmail database to get set
the max users number, switching this field to 0 solves this issue...
AM
2007/11/20, dnk [EMAIL PROTECTED]:
Hi there,
I am just trying to
Hi,
Greatt it helped...
hope to ear good news ;)
AM
2007/11/17, Natalio Gatti [EMAIL PROTECTED]:
On Jun 22, 2007 11:05 AM, A M [EMAIL PROTECTED] wrote:
Hi,
follows eMPF patch against 1.3.15
--
AM
agmsoft(at)gmail.com
On Jun 22, 2007 11:05 AM, A M [EMAIL PROTECTED] wrote:
Hi,
follows eMPF patch against 1.3.15
--
AM
agmsoft(at)gmail.com
-
QmailToaster hosted by: VR Hosted http://www.vr.org
2007/8/13, Kaven Gagnon [EMAIL PROTECTED]:
Hi, since my last qmail migration, I cannot access to some domains from
vqAdmin. All domains appear, but some domains display a blank page when I
click on them (6 of 51 of my domain have this problem).
Another problem, SMTP authentication is not
Hi, thanks a lot, my vqAdmin problem is solved!
About SMTP Auth, I use Outlook 2007... Authentication work very well
before my migration on this machine.
2007/8/13, Kaven Gagnon [EMAIL PROTECTED]:
Hi, since my last qmail migration, I cannot access to some domains from
vqAdmin. All
Firdaus Tjahyadi wrote:
Dear All
i want to use vqadmin disable email relay feature
so some of my email account user can't relay our mail server to send
email to other domain
Firdaus,
let me confirm this, you want some of your email account are unable to
sent email to other domain?
if so,
Hi,
follows eMPF patch against 1.3.15
2007/6/22, PakOgah [EMAIL PROTECTED]:
Firdaus Tjahyadi wrote:
Dear All
i want to use vqadmin disable email relay feature
so some of my email account user can't relay our mail server to send
email to other domain
Firdaus,
let me confirm this, you
is this the patch?
eMPF patch for Bill Shupp's qmail toaster v0.8.1
created by Mike Tesliuk
http://www.inter7.com/empf/empf-toaster-0.8.1.patch
A M wrote:
Hi,
follows eMPF patch against 1.3.15
2007/6/22, PakOgah [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]:
Firdaus Tjahyadi wrote:
No,
this one is hand made (as per inter7 instructions) to fit inline with QMT.
When ever i install a new release I test my patch in the toaster put it on a
devel server then test it for a while.
When it's safe to go i set it up on production servers.
Never tried Bill's patch as i've never
Hi Firdaus,
You should not turn on relaying on your server, others will find and you
will run in a bunch of problems.
Tell your users to authenticate when sending mails, so they can use your
server to send mails wherever they want.
Per default authentication is turned on in qmail-toaster.
You can
Dear All..
I am installing this incredible qmail-toaster in my fedora core 5 linux.
I THINK this is on the wiki something about leaving certain fields empty
when creating the domain( Accounts, forwards, aliases etc), you should fill
those you need to disable with Zero '0'.
Am rushing
PROTECTED]
Sent: 05 Maret 2007 22:52
To: qmailtoaster-list@qmailtoaster.com
Subject: RE: [qmailtoaster] vqadmin error blank page
Dear All..
I am installing this incredible qmail-toaster in my fedora core 5 linux.
I THINK this is on the wiki something about leaving certain fields empty
Try /home/vpopmail/bin/vdeldomain, then vadddomain.
rendra wrote:
Dear Alex,
Thanks for your answer, I am trying to add a new domain and as you say
it’s work’s good.But anyhow how do I to edit my domain earlier through
the command line ?
I am sorry for my stupid question.I am
This added valias support.
Relevant thread:
http://www.mail-archive.com/qmailtoaster-list@qmailtoaster.com/msg05640.html
On 9/1/06, Eric Shubes [EMAIL PROTECTED] wrote:
Erik,
I'm a bit confused as to the status of vqadmin. What changes were made in
v1.3.2?
--
-Eric 'shubes'
Hello Simone,
Monday, July 31, 2006, 4:14:10 PM, you wrote:
I
I've isntalled last toaster packages from www.qmailtoaster.com on a
Mandriva 2006 linux system.
[EMAIL PROTECTED] tmp]# rpm -qa | grep vqadmin
vqadmin-toaster-2.3.4-1.3.2mdk
[EMAIL PROTECTED] tmp]#
All works quite fine
Hi
thanks for your reply.
I got this problem too. It looks like an error in vpopmail package,
probably mysql related. Do ~vpopmail/bin/vdomaininfo and look at
users counters for yours domains. I got users: 2147483647 for
almost all my domains :(
you got it..
main: xxx.com
Simone Marzona wrote:
Hi
thanks for your reply.
I got this problem too. It looks like an error in vpopmail package,
probably mysql related. Do ~vpopmail/bin/vdomaininfo and look at
users counters for yours domains. I got users: 2147483647 for
almost all my domains :(
you
Hi
I solved this problem by correcting the entries in the database for the
filed user_count.
I found a lot of error (null vaules or simply wrong ones)..
now seems work correctly even by adding and removing users.
thanks a lot.
[EMAIL PROTECTED] wrote:
Hello Simone,
Wednesday, August 2, 2006, 4:45:13 PM, you wrote:
I got this problem too. It looks like an error in vpopmail package,
probably mysql related. Do ~vpopmail/bin/vdomaininfo and look at
users counters for yours domains. I got users: 2147483647
Hello and sorry if I'm spamming the list a little lately. :-)
This time, I'm here to report a bug on the VQADMIN web interface.
I was making my first tests on the web interface and I wanted to try to deny
relaying for a certain domain and/or a certain user.
I logged into the web panel and then
59 matches
Mail list logo
