[qmailtoaster] Installation Error: Vpopmail user, vchkpw group
I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail-toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail-toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] winmail.dat- QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
I disabled SELinux and attempted the install again, with the same result. On Jun 19, 2006, at 1:09 PM, Fernando Azevedo wrote: Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
Yessir, I did. On 6/19/06, Erik Espinoza [EMAIL PROTECTED] wrote: Did you reboot after disabling SELinux? On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: I disabled SELinux and attempted the install again, with the same result. On Jun 19, 2006, at 1:09 PM, Fernando Azevedo wrote: Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail- toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: qmailtoaster-list- [EMAIL PROTECTED] winmail.dat - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: qmailtoaster-list- [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
Hi, If this is a new installation that failed, remove (or rename) /var/qmail and install vpopmail-toaster again. Should go OK. Regards, Nick PS SELinux must be disabled for qmailtoaster to work properly. Yessir, I did. On 6/19/06, Erik Espinoza [EMAIL PROTECTED] wrote: Did you reboot after disabling SELinux? On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: I disabled SELinux and attempted the install again, with the same result. On Jun 19, 2006, at 1:09 PM, Fernando Azevedo wrote: Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail- toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
I have turned SELinux off and rebooted with it turned off. I tried removing the /var/qmail directory and then re-running the installation script. I came up with the same errors in the same place. Can anyone just tell me what the settings need to be for these users? Do I need to figure out how to uninstall the two previously installed packages and run the installs again for this user and group to be created properly? On 6/19/06, Nick Hemmesch [EMAIL PROTECTED] wrote: Hi, If this is a new installation that failed, remove (or rename) /var/qmail and install vpopmail-toaster again. Should go OK. Regards, Nick PS SELinux must be disabled for qmailtoaster to work properly. Yessir, I did. On 6/19/06, Erik Espinoza [EMAIL PROTECTED] wrote: Did you reboot after disabling SELinux? On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: I disabled SELinux and attempted the install again, with the same result. On Jun 19, 2006, at 1:09 PM, Fernando Azevedo wrote: Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail- toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
Since it is failing on vpopmail user, can you check if the user is in /etc/passwd and /etc/shadow? If they are, does /home/vpopmail exist? -Eric :: DraconPern :: draconpern.deviantart.com www.frontmotion.com :: www.draconpern.com - Original Message - From: Roxanne Sandesara [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Monday, June 19, 2006 5:29 PM Subject: Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I have turned SELinux off and rebooted with it turned off. I tried removing the /var/qmail directory and then re-running the installation script. I came up with the same errors in the same place. Can anyone just tell me what the settings need to be for these users? Do I need to figure out how to uninstall the two previously installed packages and run the installs again for this user and group to be created properly? On 6/19/06, Nick Hemmesch [EMAIL PROTECTED] wrote: Hi, If this is a new installation that failed, remove (or rename) /var/qmail and install vpopmail-toaster again. Should go OK. Regards, Nick PS SELinux must be disabled for qmailtoaster to work properly. Yessir, I did. On 6/19/06, Erik Espinoza [EMAIL PROTECTED] wrote: Did you reboot after disabling SELinux? On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: I disabled SELinux and attempted the install again, with the same result. On Jun 19, 2006, at 1:09 PM, Fernando Azevedo wrote: Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail- toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
As I mentioned in my first message of this thread, the user vpopmail does not exist; the group vchkpw does not exist. That's why I've been asking what the settings for those should be, so that I could try to add them manually and then attempt the installation again. On 6/19/06, Ing-Long Eric Kuo (DraconPern) [EMAIL PROTECTED] wrote: Since it is failing on vpopmail user, can you check if the user is in /etc/passwd and /etc/shadow? If they are, does /home/vpopmail exist? -Eric :: DraconPern :: draconpern.deviantart.com www.frontmotion.com :: www.draconpern.com - Original Message - From: Roxanne Sandesara [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Monday, June 19, 2006 5:29 PM Subject: Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I have turned SELinux off and rebooted with it turned off. I tried removing the /var/qmail directory and then re-running the installation script. I came up with the same errors in the same place. Can anyone just tell me what the settings need to be for these users? Do I need to figure out how to uninstall the two previously installed packages and run the installs again for this user and group to be created properly? On 6/19/06, Nick Hemmesch [EMAIL PROTECTED] wrote: Hi, If this is a new installation that failed, remove (or rename) /var/qmail and install vpopmail-toaster again. Should go OK. Regards, Nick PS SELinux must be disabled for qmailtoaster to work properly. Yessir, I did. On 6/19/06, Erik Espinoza [EMAIL PROTECTED] wrote: Did you reboot after disabling SELinux? On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: I disabled SELinux and attempted the install again, with the same result. On Jun 19, 2006, at 1:09 PM, Fernando Azevedo wrote: Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail- toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
These users are created by the installation of vpopmail. If you don't have them, then you likely don't have other things well. Try: rpm -Uvh /usr/src/redhat/RPMS/i386/vpopmail-toaster-*.rpm Roxanne Sandesara wrote: As I mentioned in my first message of this thread, the user vpopmail does not exist; the group vchkpw does not exist. That's why I've been asking what the settings for those should be, so that I could try to add them manually and then attempt the installation again. On 6/19/06, Ing-Long Eric Kuo (DraconPern) [EMAIL PROTECTED] wrote: Since it is failing on vpopmail user, can you check if the user is in /etc/passwd and /etc/shadow? If they are, does /home/vpopmail exist? -Eric :: DraconPern :: draconpern.deviantart.com www.frontmotion.com :: www.draconpern.com - Original Message - From: Roxanne Sandesara [EMAIL PROTECTED] To: qmailtoaster-list@qmailtoaster.com Sent: Monday, June 19, 2006 5:29 PM Subject: Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I have turned SELinux off and rebooted with it turned off. I tried removing the /var/qmail directory and then re-running the installation script. I came up with the same errors in the same place. Can anyone just tell me what the settings need to be for these users? Do I need to figure out how to uninstall the two previously installed packages and run the installs again for this user and group to be created properly? On 6/19/06, Nick Hemmesch [EMAIL PROTECTED] wrote: Hi, If this is a new installation that failed, remove (or rename) /var/qmail and install vpopmail-toaster again. Should go OK. Regards, Nick PS SELinux must be disabled for qmailtoaster to work properly. Yessir, I did. On 6/19/06, Erik Espinoza [EMAIL PROTECTED] wrote: Did you reboot after disabling SELinux? On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: I disabled SELinux and attempted the install again, with the same result. On Jun 19, 2006, at 1:09 PM, Fernando Azevedo wrote: Hi! I have felt some problems in Fedora Core 5 due to SELinux. Do you have it installed? If you do I'd recomend that either you spend some (lotsof) time reading the documentation and properly configuring it or, as I did, just disable it... Regards, FA De: Roxanne Sandesara [mailto:[EMAIL PROTECTED] Enviada: seg 19-06-2006 17:26 Para: qmailtoaster-list@qmailtoaster.com Assunto: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group I am trying to install Qmail-toaster on a Fedora Core 5 box, and started by using the automated scripts. All of the downloads completed successfully. The first two packages installed without any problems. The Vpopmail package install fails, with the following error: checking vpopmail configure options... ok checking whether we can locate the qmail directory... yes checking whether we can locate the qmail-newu program... yes checking whether we can locate the qmail-inject program... yes checking whether we can locate the qmail-newmrh program... yes checking for valid vpopmail user and group... yes checking whether password file entry for the vpopmail user exists... No vpopmail user found. Please add the vchkpw group and vpopmail user. Then run configure again no configure: error: Could not compile and run even a trivial ANSI C program - check CC. error: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) RPM build errors: Bad exit status from /var/tmp/rpm-tmp.81274 (%build) error: File not found by glob: /usr/src/redhat/RPMS/i386/vpopmail- toaster*.rpm Now, I have checked, with filters turned off, and the system is currect: the user and group do not exist. But I don't know what settings need to be set for the user or the group, and could not easily find that information on the Wiki site or the FAQ. If someone could tell me what needs to be set for the user and the group - whole command lines would be nice, but I can puzzle it out given reasonable clues - I would really appreciate it. Or, pointing me to a site with documentation that lays out what I need to do would be equally valid and appreciated. -- -Eric 'shubes' - QmailToaster hosted by: VR Hosted http://www.vr.org - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
That command fails, because there is no RPM in that directory, because the build of the RPM fails, which is where I started when I got into all of this and started asking for help. In hopes that I might somehow be able to move forward, here, I am quoing the following from below: rpmbuild --rebuild --with fdr50 /root/Desktop/qmail/vpopmail-toaster-5.4.13-1.3.1.src.rpm Installing /root/Desktop/qmail/vpopmail-toaster-5.4.13-1.3.1.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.15176 + umask 022 + cd /usr/src/redhat/BUILD + LANG=C + export LANG + unset DISPLAY + cd /usr/src/redhat/BUILD + rm -rf vpopmail-5.4.13 + /usr/bin/bzip2 -dc /usr/src/redhat/SOURCES/vpopmail-5.4.13.tar.bz2 + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd vpopmail-5.4.13 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chgrp -Rhf root . + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (vpopmail-5.4.13.patch.bz2):' Patch #0 (vpopmail-5.4.13.patch.bz2): + /usr/bin/bzip2 -d + patch -p0 -s + STATUS=0 + '[' 0 -ne 0 ']' + '[' -f /var/tmp/vpopmail-5.4.13-gcc ']' + rm -f /var/tmp/vpopmail-5.4.13-gcc + echo gcc + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + cat + chmod u+x /var/tmp/vpopmail-5.4.13-show_flags + /var/tmp/vpopmail-5.4.13-show_flags RPM RELEASE: vpopmail-toaster-5.4.13-1.3.1 OS TYPE IS : Fedora Core 5 Linux BUILD DATE : Mon Jun 05 2006 CCFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables LDFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + rm -f /var/tmp/vpopmail-5.4.13-show_flags + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.63450 + umask 022 + cd /usr/src/redhat/BUILD + cd vpopmail-5.4.13 + LANG=C + export LANG + unset DISPLAY + '[' -n /var/tmp/vpopmail-toaster-5.4.13-root -a /var/tmp/vpopmail-toaster-5.4.13-root '!=' / ']' + rm -rf /var/tmp/vpopmail-toaster-5.4.13-root + mkdir -p /var/tmp/vpopmail-toaster-5.4.13-root + '[' -f /var/qmail/bin/vpopfake ']' + rm -fR /var/qmail + '[' -f /var/qmail/bin/qmail-newu ']' + mkdir /var/qmail + mkdir /var/qmail/bin + touch /var/qmail/bin/qmail-newu + touch /var/qmail/bin/qmail-inject + touch /var/qmail/bin/qmail-newmrh + touch /var/qmail/bin/vpopfake ++ /usr/bin/id -g vchkpw + '[' -z '' ']' + /usr/sbin/groupadd -g 89 -r vchkpw groupadd: GID 89 is not unique + : ++ /usr/bin/id -u vpopmail + '[' -z '' ']' + /usr/sbin/useradd -u 89 -r -M -d /home/vpopmail -s /sbin/nologin -c 'Vpopmail User' -g vchkpw vpopmail useradd: unknown group vchkpw + : + ./configure --prefix=/home/vpopmail --enable-vpopuser=vpopmail --enable-vpopgroup=vchkpw --enable-libdir=/usr/lib/mysql --disable-roaming-users --enable-tcprules-prog=/usr/bin/tcprules --enable-tcpserver-file=/etc/tcprules.d/tcp.smtp --enable-make-seekable --enable-clear-passwd --disable-users-big-dir --enable-qmail-ext --disable-ip-alias-domains --enable-auth-module=mysql --disable-passwd --enable-logging=v --enable-log-name=vpopmail --disable-mysql-limits --enable-valias --disable-many-domains checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gawk... (cached) gawk checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for strerror in -lcposix... no checking for crypt in -lcrypt... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for memory.h... (cached) yes checking netinet/in.h usability... yes checking netinet/in.h
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
Looks like the key points to missing gcc. Have you run through the dependencies script? On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: That command fails, because there is no RPM in that directory, because the build of the RPM fails, which is where I started when I got into all of this and started asking for help. In hopes that I might somehow be able to move forward, here, I am quoing the following from below: rpmbuild --rebuild --with fdr50 /root/Desktop/qmail/vpopmail-toaster-5.4.13-1.3.1.src.rpm Installing /root/Desktop/qmail/vpopmail-toaster-5.4.13-1.3.1.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.15176 + umask 022 + cd /usr/src/redhat/BUILD + LANG=C + export LANG + unset DISPLAY + cd /usr/src/redhat/BUILD + rm -rf vpopmail-5.4.13 + /usr/bin/bzip2 -dc /usr/src/redhat/SOURCES/vpopmail-5.4.13.tar.bz2 + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd vpopmail-5.4.13 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chgrp -Rhf root . + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (vpopmail-5.4.13.patch.bz2):' Patch #0 (vpopmail-5.4.13.patch.bz2): + /usr/bin/bzip2 -d + patch -p0 -s + STATUS=0 + '[' 0 -ne 0 ']' + '[' -f /var/tmp/vpopmail-5.4.13-gcc ']' + rm -f /var/tmp/vpopmail-5.4.13-gcc + echo gcc + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + cat + chmod u+x /var/tmp/vpopmail-5.4.13-show_flags + /var/tmp/vpopmail-5.4.13-show_flags RPM RELEASE: vpopmail-toaster-5.4.13-1.3.1 OS TYPE IS : Fedora Core 5 Linux BUILD DATE : Mon Jun 05 2006 CCFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables LDFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + rm -f /var/tmp/vpopmail-5.4.13-show_flags + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.63450 + umask 022 + cd /usr/src/redhat/BUILD + cd vpopmail-5.4.13 + LANG=C + export LANG + unset DISPLAY + '[' -n /var/tmp/vpopmail-toaster-5.4.13-root -a /var/tmp/vpopmail-toaster-5.4.13-root '!=' / ']' + rm -rf /var/tmp/vpopmail-toaster-5.4.13-root + mkdir -p /var/tmp/vpopmail-toaster-5.4.13-root + '[' -f /var/qmail/bin/vpopfake ']' + rm -fR /var/qmail + '[' -f /var/qmail/bin/qmail-newu ']' + mkdir /var/qmail + mkdir /var/qmail/bin + touch /var/qmail/bin/qmail-newu + touch /var/qmail/bin/qmail-inject + touch /var/qmail/bin/qmail-newmrh + touch /var/qmail/bin/vpopfake ++ /usr/bin/id -g vchkpw + '[' -z '' ']' + /usr/sbin/groupadd -g 89 -r vchkpw groupadd: GID 89 is not unique + : ++ /usr/bin/id -u vpopmail + '[' -z '' ']' + /usr/sbin/useradd -u 89 -r -M -d /home/vpopmail -s /sbin/nologin -c 'Vpopmail User' -g vchkpw vpopmail useradd: unknown group vchkpw + : + ./configure --prefix=/home/vpopmail --enable-vpopuser=vpopmail --enable-vpopgroup=vchkpw --enable-libdir=/usr/lib/mysql --disable-roaming-users --enable-tcprules-prog=/usr/bin/tcprules --enable-tcpserver-file=/etc/tcprules.d/tcp.smtp --enable-make-seekable --enable-clear-passwd --disable-users-big-dir --enable-qmail-ext --disable-ip-alias-domains --enable-auth-module=mysql --disable-passwd --enable-logging=v --enable-log-name=vpopmail --disable-mysql-limits --enable-valias --disable-many-domains checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gawk... (cached) gawk checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for strerror in -lcposix... no checking for crypt in -lcrypt... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
I just did. Then attempted the install again. I got the following. PLEASE notice that GCC is up and working and has no problems on this system. The ONLY failure in the running of the build of the Source RPM is in the creation/identification of the vpopmail user and the vchkpw group. THIS is why I need /that/ information. Installing vpopmail-toaster-5.4.13-1.3.1.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.81637 + umask 022 + cd /usr/src/redhat/BUILD + LANG=C + export LANG + unset DISPLAY + cd /usr/src/redhat/BUILD + rm -rf vpopmail-5.4.13 + /usr/bin/bzip2 -dc /usr/src/redhat/SOURCES/vpopmail-5.4.13.tar.bz2 + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd vpopmail-5.4.13 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chgrp -Rhf root . + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (vpopmail-5.4.13.patch.bz2):' Patch #0 (vpopmail-5.4.13.patch.bz2): + /usr/bin/bzip2 -d + patch -p0 -s + STATUS=0 + '[' 0 -ne 0 ']' + '[' -f /var/tmp/vpopmail-5.4.13-gcc ']' + rm -f /var/tmp/vpopmail-5.4.13-gcc + echo gcc + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + cat + chmod u+x /var/tmp/vpopmail-5.4.13-show_flags + /var/tmp/vpopmail-5.4.13-show_flags RPM RELEASE: vpopmail-toaster-5.4.13-1.3.1 OS TYPE IS : Fedora Core 5 Linux BUILD DATE : Mon Jun 05 2006 CCFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables LDFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + rm -f /var/tmp/vpopmail-5.4.13-show_flags + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.32650 + umask 022 + cd /usr/src/redhat/BUILD + cd vpopmail-5.4.13 + LANG=C + export LANG + unset DISPLAY + '[' -n /var/tmp/vpopmail-toaster-5.4.13-root -a /var/tmp/vpopmail-toaster-5.4.13-root '!=' / ']' + rm -rf /var/tmp/vpopmail-toaster-5.4.13-root + mkdir -p /var/tmp/vpopmail-toaster-5.4.13-root + '[' -f /var/qmail/bin/vpopfake ']' + rm -fR /var/qmail + '[' -f /var/qmail/bin/qmail-newu ']' + mkdir /var/qmail + mkdir /var/qmail/bin + touch /var/qmail/bin/qmail-newu + touch /var/qmail/bin/qmail-inject + touch /var/qmail/bin/qmail-newmrh + touch /var/qmail/bin/vpopfake ++ /usr/bin/id -g vchkpw + '[' -z '' ']' + /usr/sbin/groupadd -g 89 -r vchkpw groupadd: GID 89 is not unique + : ++ /usr/bin/id -u vpopmail + '[' -z '' ']' + /usr/sbin/useradd -u 89 -r -M -d /home/vpopmail -s /sbin/nologin -c 'Vpopmail User' -g vchkpw vpopmail useradd: unknown group vchkpw + : + ./configure --prefix=/home/vpopmail --enable-vpopuser=vpopmail --enable-vpopgroup=vchkpw --enable-libdir=/usr/lib/mysql --disable-roaming-users --enable-tcprules-prog=/usr/bin/tcprules --enable-tcpserver-file=/etc/tcprules.d/tcp.smtp --enable-make-seekable --enable-clear-passwd --disable-users-big-dir --enable-qmail-ext --disable-ip-alias-domains --enable-auth-module=mysql --disable-passwd --enable-logging=v --enable-log-name=vpopmail --disable-mysql-limits --enable-valias --disable-many-domains checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gawk... (cached) gawk checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for strerror in -lcposix... no checking for crypt in -lcrypt... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking how to run the C preprocessor... gcc -E checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking for memory.h... (cached) yes checking netinet/in.h usability... yes checking netinet/in.h presence... yes checking for netinet/in.h... yes checking shadow.h
Re: [qmailtoaster] Installation Error: Vpopmail user, vchkpw group
OK. I just found the error: ++ /usr/bin/id -g vchkpw + '[' -z '' ']' + /usr/sbin/groupadd -g 89 -r vchkpw groupadd: GID 89 is not unique + : ++ /usr/bin/id -u vpopmail + '[' -z '' ']' + /usr/sbin/useradd -u 89 -r -M -d /home/vpopmail -s /sbin/nologin -c 'Vpopmail User' -g vchkpw vpopmail useradd: unknown group vchkpw + : So what I need to know is: do I /need/ this group to be group ID #89? Because #89 on my system at this point is the postfix user group. The user is not being created because the group is failing. I really don't know what to do at this point. I don't know how far-reaching the implications could be. I could try to create the group and the user independantly. But I don't know if the script will pick them up and use them, or if it will just /keep/ trying to create them, and keep failing. Please advise. On 6/19/06, Roxanne Sandesara [EMAIL PROTECTED] wrote: I just did. Then attempted the install again. I got the following. PLEASE notice that GCC is up and working and has no problems on this system. The ONLY failure in the running of the build of the Source RPM is in the creation/identification of the vpopmail user and the vchkpw group. THIS is why I need /that/ information. Installing vpopmail-toaster-5.4.13-1.3.1.src.rpm Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.81637 + umask 022 + cd /usr/src/redhat/BUILD + LANG=C + export LANG + unset DISPLAY + cd /usr/src/redhat/BUILD + rm -rf vpopmail-5.4.13 + /usr/bin/bzip2 -dc /usr/src/redhat/SOURCES/vpopmail-5.4.13.tar.bz2 + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd vpopmail-5.4.13 ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chown -Rhf root . ++ /usr/bin/id -u + '[' 0 = 0 ']' + /bin/chgrp -Rhf root . + /bin/chmod -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (vpopmail-5.4.13.patch.bz2):' Patch #0 (vpopmail-5.4.13.patch.bz2): + /usr/bin/bzip2 -d + patch -p0 -s + STATUS=0 + '[' 0 -ne 0 ']' + '[' -f /var/tmp/vpopmail-5.4.13-gcc ']' + rm -f /var/tmp/vpopmail-5.4.13-gcc + echo gcc + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + cat + chmod u+x /var/tmp/vpopmail-5.4.13-show_flags + /var/tmp/vpopmail-5.4.13-show_flags RPM RELEASE: vpopmail-toaster-5.4.13-1.3.1 OS TYPE IS : Fedora Core 5 Linux BUILD DATE : Mon Jun 05 2006 CCFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables LDFLAGS: -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables + '[' -f /var/tmp/vpopmail-5.4.13-show_flags ']' + rm -f /var/tmp/vpopmail-5.4.13-show_flags + exit 0 Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.32650 + umask 022 + cd /usr/src/redhat/BUILD + cd vpopmail-5.4.13 + LANG=C + export LANG + unset DISPLAY + '[' -n /var/tmp/vpopmail-toaster-5.4.13-root -a /var/tmp/vpopmail-toaster-5.4.13-root '!=' / ']' + rm -rf /var/tmp/vpopmail-toaster-5.4.13-root + mkdir -p /var/tmp/vpopmail-toaster-5.4.13-root + '[' -f /var/qmail/bin/vpopfake ']' + rm -fR /var/qmail + '[' -f /var/qmail/bin/qmail-newu ']' + mkdir /var/qmail + mkdir /var/qmail/bin + touch /var/qmail/bin/qmail-newu + touch /var/qmail/bin/qmail-inject + touch /var/qmail/bin/qmail-newmrh + touch /var/qmail/bin/vpopfake ++ /usr/bin/id -g vchkpw + '[' -z '' ']' + /usr/sbin/groupadd -g 89 -r vchkpw groupadd: GID 89 is not unique + : ++ /usr/bin/id -u vpopmail + '[' -z '' ']' + /usr/sbin/useradd -u 89 -r -M -d /home/vpopmail -s /sbin/nologin -c 'Vpopmail User' -g vchkpw vpopmail useradd: unknown group vchkpw + : + ./configure --prefix=/home/vpopmail --enable-vpopuser=vpopmail --enable-vpopgroup=vchkpw --enable-libdir=/usr/lib/mysql --disable-roaming-users --enable-tcprules-prog=/usr/bin/tcprules --enable-tcpserver-file=/etc/tcprules.d/tcp.smtp --enable-make-seekable --enable-clear-passwd --disable-users-big-dir --enable-qmail-ext --disable-ip-alias-domains --enable-auth-module=mysql --disable-passwd --enable-logging=v --enable-log-name=vpopmail --disable-mysql-limits --enable-valias --disable-many-domains checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets ${MAKE}... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gawk... (cached) gawk checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for style of include used by make... GNU checking dependency style of gcc... none checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for strerror in -lcposix... no checking for crypt in -lcrypt...