[qubes-users] Recover broken bootloader

2017-10-30 Thread lokedhs
My laptop has started to fail to boot my 4.0rc2 installation. This started after doing a qubes-dom0-update, but I'm pretty sure that I had rebooted the machine successfully at least once since then. The computer has now gone into a bootloop, and fails to display the GRUB screen. I can only

Re: [qubes-users] Anyone have any luck setting up KDE Connect or another Android-sync tool?

2017-10-30 Thread Sudomain
@[799] Thank you for the links. I've read through them and I understand iptables a bit better now, but unfortunately I still haven't been able to get this to work. I've created rules for both tcp and udp on ports 1714:1764 (per the KDEConnect troubleshooting doc I originally linked to). I tried

Re: [qubes-users] Re: Qubes 4.0-rc2 :: VMs fail to start

2017-10-30 Thread Chris Laprise
On 10/30/17 16:29, Roy Bernat wrote: On Wednesday, 25 October 2017 13:26:51 UTC-4, [799] wrote: Hello, As at least one other Qubes user has the same problem, that VMs won't start, I'll add this as special topic. I've made a clean install of Qubes 4-rc2 but ~70% of the time I can't boot the

[qubes-users] Re: Rc2 hangs on install -- Dell Inspiron i5759-8835SLV

2017-10-30 Thread billollib
On Monday, October 30, 2017 at 7:29:55 PM UTC-4, bill...@gmail.com wrote: > Don't know what this means, but I downloaded the new 4.0 RC2, put it on a > flash drive, and tried to install it on my new Dell laptop. It froze early > on, with the messages: > > > Firmware Bug: TSC_DEADLINE

[qubes-users] Rc2 hangs on install -- Dell Inspiron i5759-8835SLV

2017-10-30 Thread billollib
Don't know what this means, but I downloaded the new 4.0 RC2, put it on a flash drive, and tried to install it on my new Dell laptop. It froze early on, with the messages: Firmware Bug: TSC_DEADLINE disabled due to errate. Please update microcode to version 0xb2 (or later) 2.035271 Could

Re: [qubes-users] How to Setup Wireless

2017-10-30 Thread donoban
On 10/30/2017 03:29 PM, donoban wrote: > On 10/30/2017 12:53 AM, Ray Joseph wrote: >> How do I enter my password? In Debian9, I installed wpa_supplicant to >> include a key in network/interfaces. Should this same method be used for >> sys-net? >> >> Where would I find this type of information.

Re: [qubes-users] Re: really no support

2017-10-30 Thread Desobediente
I don't use Qubes 4, I wasn't even aware of that option. The page I mentioned should be updated in the 4.x docs -- iuri.neocities.org -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails

[qubes-users] Re: really no support

2017-10-30 Thread Foppe de Haan
On Monday, October 30, 2017 at 9:43:53 PM UTC+1, Outback Dingo wrote: > seriously still seems there is very little support ive sent multiple > emails to the list and received no response, so let me ask again ? > > how do i enlarge a vm file system with 4.0RC2 > basically my personal vm is out of

Re: [qubes-users] really no support

2017-10-30 Thread Desobediente
Two considerations: 1 - The size is the target size - total size you want - not how much more size you want to add. The example I gave would resize the AppVM to 105GB 2 - I'm a Qubes OS user, I'm not from the support team, nor I believe there is such a thing in this mailing list, or at all. This

Re: [qubes-users] really no support

2017-10-30 Thread Desobediente
https://www.qubes-os.org/doc/resize-disk-image/ on dom0 terminal: qvm-grow-private personal 104857MB -- iuri.neocities.org -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send

AW: Re: AW: [qubes-users] Reinstalled Qubes 3.2 -> /grub2/i386-pc/normal.mod not found

2017-10-30 Thread '[799]' via qubes-users
Hello, > Try repeating the Qubes install but when you > get to the custom partitioning step, make sure > to specify the appropriate partitions for boot > and /. You will probably want to re-enable the > boot flag on your hda1 partition as well Thank you for the feedback, I have meanwhile

[qubes-users] HCL - Lenovo G580 20150

2017-10-30 Thread tq3otj9qer0o9uq34toighwfglk
Model: Lenovo G580 20150 (Intel i7-3612QM, 2.10GHz, 3rd Gen.) BIOS: 5ECN96WW(V9.01) HVM:YES - Intel VT-x IOMMU: NO SLAT: YES - Intel VT-x TPM:UNKNOWN Qubes: R3.2 Kernel: 4.9.45-21 Remark: CPU upgraded to i7-3612QM. NOT WORKING: port for SD card; touch-pad "hotkeys".

[qubes-users] really no support

2017-10-30 Thread Outback Dingo
seriously still seems there is very little support ive sent multiple emails to the list and received no response, so let me ask again ? how do i enlarge a vm file system with 4.0RC2 basically my personal vm is out of space.. -- You received this message because you are subscribed to the

Re: [qubes-users] How to Setup Wireless

2017-10-30 Thread donoban
On 10/30/2017 12:53 AM, Ray Joseph wrote: > How do I enter my password? In Debian9, I installed wpa_supplicant to > include a key in network/interfaces. Should this same method be used for > sys-net? > > Where would I find this type of information. Searching the Qubes-OS doc, I > only found

Re: AW: [qubes-users] Reinstalled Qubes 3.2 -> /grub2/i386-pc/normal.mod not found

2017-10-30 Thread awokd
On Mon, October 30, 2017 18:42, '[799]' via qubes-users wrote: > Additional information: > I found out that Qubes didn't boot into /dev/sda3 but in /dev/sda5 which > can't be started as this is not primary partition. > See also my attached screenshot. > > I have mounted both partition with a live

AW: [qubes-users] Re: Qubes 4.0-rc2 :: VMs fail to start

2017-10-30 Thread '[799]' via qubes-users
Hello Rob, >> So what is the solution ? Every reboot I am >> struggle to Start the vm’s As I haven't seen any good solution for this yet, I recommend going back to Qubes 3.2 until 4.0 has been updated to fix this or until we know what is causing the problems (hardware?). [799] -- You

AW: [qubes-users] Reinstalled Qubes 3.2 -> /grub2/i386-pc/normal.mod not found

2017-10-30 Thread '[799]' via qubes-users
Additional information: I found out that Qubes didn't boot into /dev/sda3 but in /dev/sda5 which can't be started as this is not primary partition. See also my attached screenshot. I have mounted both partition with a live Linux and copied all files from /dev/sda5 to /dev/sda3. I have also

[qubes-users] Reinstalled Qubes 3.2 -> /grub2/i386-pc/normal.mod not found

2017-10-30 Thread '[799]' via qubes-users
Hello, After Qubes 4 wasn't working for me I reinstalled Qubes 3.2 but on the first boot I get the following error message: error: file '/grub2/i386-pc/normal.mod' not found. Entering rescue mode... I had 4 partitions before: /dev/hda1 = windows boot /dev/hda1 = windows 10 /dev/hda3 = Qubes

[qubes-users] Re: Qubes 4.0-rc2 :: VMs fail to start

2017-10-30 Thread Roy Bernat
And now the sys firewall don’t start anymore . Someone Hel -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com.

[qubes-users] Re: Qubes 4.0-rc2 :: VMs fail to start

2017-10-30 Thread Roy Bernat
So what is the solution ? Every reboot I am struggle to Start the vm’s -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [qubes-users] Re: Qubes 4.0rc2 install on corebooted Lenovo G505s (AMD)

2017-10-30 Thread awokd
On Thu, October 26, 2017 12:37, awokd wrote: > On Wed, October 25, 2017 20:32, awokd wrote: >> Few issues on this attempt am hoping someone might have some insight >> into. >> >> 1) Installer warns "interrupt remapping" is not supported. >> qubes-hcl-report shows IOMMU as enabled but "Remapping"

[qubes-users] Re: Clearly expose --mem option in HVM docs

2017-10-30 Thread Ryan Tate
By the way, it looks like this was suggested previously, see number 3 in the ordered list under “Steps to reproduce” here: https://github.com/QubesOS/qubes-issues/issues/3089 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from

Re: [qubes-users] Why is there no qubes manager in V4.0?

2017-10-30 Thread David Hobach
On 10/30/2017 12:40 AM, Ray Joseph wrote: On Sunday, October 29, 2017 at 1:52:53 PM UTC-5, David Hobach wrote: On 10/29/2017 03:36 PM, Sergio da Matta wrote: Dear David, Thank you for your information. I did not know conky. I liked it but I did not find the repo. Did you installed on dom0?

Re: [qubes-users] Re: Properly setup a qube dns cache server

2017-10-30 Thread nicholas roveda
I'm already in the process of implementing this feauture (method A) in R4.0. > dom0 doesn't store any DNS settings. Each VM forwards packets to the > next upstream VM and the DNS decision is made at your netvm resolv.conf. > Dynamic firewalls (iptables in 3.2, netfilter or so in 4.0) managed by >

Re: [qubes-users] Re: Properly setup a qube dns cache server

2017-10-30 Thread nicholas roveda
I'm already in the process of implementing this feauture (method A) in R4.0. > dom0 doesn't store any DNS settings. Each VM forwards packets to the > next upstream VM and the DNS decision is made at your netvm resolv.conf. > Dynamic firewalls (iptables in 3.2, netfilter or so in 4.0) managed by

[qubes-users] Clearly expose --mem option in HVM docs

2017-10-30 Thread Ryan Tate
Right now the HVM documentation does not prominently disclose that initial memory/RAM may be configured on creation of the HVM domain via --mem option (https://www.qubes-os.org/doc/hvm/ ). This is mentioned only in "Converting VirtualBox VM to HVM” which is

Re: [qubes-users] Installing screen-recorder in Dom0

2017-10-30 Thread corpknut
mandag 30. oktober 2017 14.55.16 UTC+1 skrev Ilpo Järvinen følgende: > On Mon, 30 Oct 2017, @gmail.com wrote: > > >I am aware of the security risks, but I need to be able to do screen > > recordings of my work in Qubes OS. And as I understand it, the recorder > > needs to run out of Dom 0.

Re: [qubes-users] Installing screen-recorder in Dom0

2017-10-30 Thread Ilpo Järvinen
On Mon, 30 Oct 2017, corpk...@gmail.com wrote: >I am aware of the security risks, but I need to be able to do screen > recordings of my work in Qubes OS. And as I understand it, the recorder needs > to run out of Dom 0. > > I have tried to use the following command to copy the installation

[qubes-users] Installing screen-recorder in Dom0

2017-10-30 Thread corpknut
Hi, I am aware of the security risks, but I need to be able to do screen recordings of my work in Qubes OS. And as I understand it, the recorder needs to run out of Dom 0. I have tried to use the following command to copy the installation files from an AppVM to Dom0: qvm-run --pass-io

[qubes-users] Re: DaVinci Resolve 14 - Possible to run in a Windows VM on Qubes OS?

2017-10-30 Thread Eric
On Sunday, October 29, 2017 at 12:38:40 PM UTC-7, lemond...@gmail.com wrote: > I'd really like to use Qubes. The last time I tried it was on an Ultrabook > and the install and setup was straightforward and painless. However, when I > tried to view a YouTube video in a browser window, I noticed