Had to switch BIOS to Legacy to install Qubes. Otherwise everything else
seems to be working well with R3.2.
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Marek Marczykowski-Górecki:
> On Wed, Jan 17, 2018 at 11:54:23PM +, mossy-nw wrote:
>> Dear Qubes community,
>
>> Has anyone using Qubes R4.0 been able to resolve any issues (e.g. with
>> wifi) by setting PCI permissive mode? (as described in:)
>
>>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Sun, Jan 14, 2018 at 03:24:04AM -0800, Vít Šesták wrote:
> Good point, I forgot this one. of course, it would, but I am not sure if
> Qubes is ready for that.
>
> But it could be useful to use 32-bit stubdoms for those reasons. They do
>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Wed, Jan 17, 2018 at 11:54:23PM +, mossy-nw wrote:
> Dear Qubes community,
>
> Has anyone using Qubes R4.0 been able to resolve any issues (e.g. with
> wifi) by setting PCI permissive mode? (as described in:)
>
>
Dear Qubes community,
Has anyone using Qubes R4.0 been able to resolve any issues (e.g. with
wifi) by setting PCI permissive mode? (as described in:)
https://www.qubes-os.org/doc/assigning-devices/#pci-passthrough-issues
I successfully used this in Qubes R3.2 to get wifi working for dell xps
13
Well, I blacklisted the relevant module and recompiled the driver as the guide
said. The hid-core.c file hasn't the line described in the guide tho: It has a
definition by cases that collapses the wacom driver to the standard one if
wacom specific driver is not loaded. In doubt, I eliminated
On 01/17/2018 04:33 PM, vel...@tutamail.com wrote:
> Running Qubes 3.2the Debian Template I created for printing is showing an
> update is needed in my GUI interface (Green arrow pointing down). I updated
> this template and other Debian templates but my printer template keeps
> showing an
On 01/17/2018 08:24 PM, Krišjānis Gross wrote:
> Hi,
>
> Was using Qubes 3.2 on 4th generation i5 processor when decided to upgrade my
> hardware.
>
> Purchased 8th gen i5 processor and MB. Now when I start my Qubes only dom0 is
> started. no other VM is started unfortunately.
>
> Here is
On Wed, 17 Jan 2018, Lorenzo Lamas wrote:
> On Thursday, January 11, 2018 at 3:57:50 PM UTC+1, Andrew David Wong wrote:
> > ## Qubes 3.2
> >
> > For Qubes 3.2, we plan to release an update that will make almost all
> > VMs run in a fully-virtualized mode. Specifically, we plan to backport
> >
groups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/qubes-users/CAFfkFnEfDESjtLPEUqJFRgmvUoQZKH71uBaY7%2BoDHkESKjdnmg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Qubes-HCL-SAMSUNG_ELECTRONICS_CO___LTD_-300E4C_300E5C_300E7C-20180117-
On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote:
> No, I am still under R3.2
>
> Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit :
> > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote:
> > > "https://github.com/adubois/qubes-app-linux-yubikey;
> > >
> > >
> > > Le mercredi
I am also in need of two invite codes to sign up for riseup.net if anyone could
help it would be greatly appreciated. thanx
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send
On Tuesday, January 16, 2018 at 12:40:16 PM UTC-5, jer...@disroot.org wrote:
> i can't install this codec from fedora 26 from software add ons.. also i've
> tried doing yum search h.264, there's nothing that seems like this codec..
Its been a while, but I think its gstreamer1-libav.Like
Use DNF to look for ffmpeg, and install that, if it is not already.
Likely it is not installed.
After that, if it still does not play, then start by telling us what app
you are using to play the video. There are usually plugins that connect
an app to the otherwise encumbered/licensed/patented
On Thursday, January 11, 2018 at 3:57:50 PM UTC+1, Andrew David Wong wrote:
> ## Qubes 3.2
>
> For Qubes 3.2, we plan to release an update that will make almost all
> VMs run in a fully-virtualized mode. Specifically, we plan to backport
> PVH support from Qubes 4.0 and enable it for all VMs
Running Qubes 3.2the Debian Template I created for printing is showing an
update is needed in my GUI interface (Green arrow pointing down). I updated
this template and other Debian templates but my printer template keeps showing
an update is needed?
*Tried an update again from GUI-Terminal
No, I am still under R3.2
Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit :
> On Wed, January 17, 2018 2:09 pm, ThierryIT wrote:
> > "https://github.com/adubois/qubes-app-linux-yubikey;
> >
> >
> > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit :
> >
> >> On Wed, January 17,
On Wed, January 17, 2018 2:09 pm, ThierryIT wrote:
> "https://github.com/adubois/qubes-app-linux-yubikey;
>
>
> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit :
>
>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote:
>>
>>> Nobody ?
>>>
>>>
>>>
>>> Le mercredi 17 janvier 2018 09:23:34
"https://github.com/adubois/qubes-app-linux-yubikey;
Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit :
> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote:
> > Nobody ?
> >
> >
> > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit :
> >
> >> Hi,
> >>
> >>
> >> I am going to
On Wed, January 17, 2018 1:09 pm, ThierryIT wrote:
> Nobody ?
>
>
> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit :
>
>> Hi,
>>
>>
>> I am going to install a new sys-usb.
>> I have before to install all what I need to the template (fedora-26)
>> first. When following your
Dear Qubes Community,
I appreciate the positive feedback received on the previous post, but I am
reaching out again this way, as I would like more candidates for this part time
"jack of all trades" IT position, which requires good knowledge of Qubes to an
extent where he/she is able to
Nobody ?
Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit :
> Hi,
>
> I am going to install a new sys-usb.
> I have before to install all what I need to the template (fedora-26) first.
> When following your procedure:
>
> ykpers has been installed but:
> I cannot do the same for
On 10/09/2017 04:49 PM, Thierry Laurion wrote:
>
> Considering Qubes 4.x has switched to HVM, what needs to be done to support
> this mode of operation?
> Opened a ticket to track this issue:
> https://github.com/Rudd-O/qubes-network-server/issues/4
>
Thank you for opening the ticket. It may
On Monday, January 15, 2018 at 6:23:55 PM UTC-5, demio...@gmail.com wrote:
> My Lenovo ThinkPad fails to boot after installing Qubes. I had to boot the
> USB drive via legacy boot for Qubes to install at all, but the EFI setup
> doesn't happen.
need a model number and spec. should not need
On Tuesday, January 16, 2018 at 2:53:54 PM UTC-5, [799] wrote:
> Hello Jerry,
>
> What are you trying to accomplish?
> I have a complete How-to which you can just follow per copy & paste to get a
> multimedia AppVM which is based on Debian-8 and can be used to listen to
> Spotify, watch DVD
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On 01/17/2018 01:58 AM, jspiegelm...@airmail.cc wrote:
> so I'm wondering how to troubleshoot it and see if it's just an
> improper configuration by the motherboard manufacturers that can
> be fixed in some way.
>
The only way is to ask your
26 matches
Mail list logo
