I am reinstalling Qubes, but I am not sure how to which devices to attach to
sys-usb and which to sys-net. Earlier the network devices were directly
attached to sys-usb and sys-usb was providing the network. This is the setting
my new install started with. I am trying to avoid getting network
> Your system intermittently freezing sounds like it could be
> https://github.com/QubesOS/qubes-issues/issues/5272 too.
It does seem like it, but one difference is that this time I haven’t even
updated dom0 yet. I have not connected to internet at all, as I was first
trying to connect through
The ethernet link is down in sys-net. I tried using ip and ifconfig and ifup
commands to bring it up, but it is still down. On finally giving for now and
pulling out the ethernet adapter, the system froze completely again, like it
was doing before I reinstalled.
Regards,
Anil
--
You
> Can someone help with this problem, right now just for getting my Qubes
> installation started, keeping ethernet and other USB devices separate, and
> with VPN installed somewhere. Detailed documentation can come later.
Right now, I have the wireless device connected to sys-net, but I am
> I have already tried attaching with qvm-usb as the Realtek adapter is listed
> by this command. It apparently gets attached with sys-net, but lsusb in
> sys-net doesn’t show it. Ifconfig also doesn’t list it.
The system froze again after I attached the ethernet usb device through
qvm-usb,
On 15-Sep-2019, at 4:31 PM, Anil Eklavya wrote:
> The system froze again after I attached the ethernet usb device through
> qvm-usb, even though network did not connect and the adapter was not listed
> in sys-net by lsusb.
>
> On rebooting, it froze twice while typing the
> On 15-Sep-2019, at 5:32 PM, awokd wrote:
>
> Anil Eklavya:
>>> Can you diagram what you are trying to do? E.g. I think it's:
>>>
>>> Ethernet---Realtek---USB3 hub---sys-usb---sys-net(for networking) ?
> I am simply trying to connect the ethernet a
> On 15-Sep-2019, at 3:36 PM, Anil Eklavya wrote:
> Following the documentation USB and PCI devices, I tried the following:
>
> - lsusb in sys-usb to list USB devices
>
> The ethernet device is listed as Bus 003 Device 002, but there is another
> device as Bus
> In dom0, do qvm-pci. Check the USED BY column to make sure the
> appropriate devices are in the appropriate qubes.
>
I tried that. There is no PCI device used by a VM, except wireless adapter
(sys-net) and USB controller (sys-usb).
> Next, ISTR others saying USB-C devices are twitchy in
> On 14-Sep-2019, at 11:21 PM, Anil Eklavya wrote:
>
> The ethernet link is down in sys-net. I tried using ip and ifconfig and ifup
> commands to bring it up, but it is still down. On finally giving for now and
> pulling out the ethernet adapter, the system froze complet
>>
>> The freezing might have been caused by the PCI device changes you made.
>> Try to undo them, so your USB controllers (only) are in sys-usb, and
>> wifi controller (only) is in sys-net.
>>
>> Then, verify the Realtek is listed in dom0 under qvm-usb. You _may_ then
>> be able to map it to
Can someone clarify exactly what all does Qubes Backup save and restore? To
me this is important because I am fairly sure my Qubes installation has
been compromised, if not at dom0, then certainly for some VMs, including
sys-net (which includes sys-usb). Most probable reason is Evil Maid Attack
> Dropping Qubes mailing list since it's not a Qubes issue any more.
> Recommend calling Dell again and telling them the above paragraph.
> Sounds like a hardware problem with the laptop to me. Get them to
> replace it.
I understand it no longer seems to be directly a Qubes issue, but I am
>> Your system intermittently freezing sounds like it could be
>> https://github.com/QubesOS/qubes-issues/issues/5272 too.
>
> It does seem like it, but one difference is that this time I haven’t even
> updated dom0 yet. I have not connected to internet at all, as I was first
> trying to
> So, I am not sure whether it is a problem related to Qubes, or the graphics
> card or with BIOS. My hunch is still that it is with BIOS, unless the
> hardware itself is compromised.
At this point (that is since I reinstalled Windows 10), I have don’t have any
Qubes on my system, but the
partition
device. I have not played around with command line encryption much.
Regards,
Anil
> On 17-Oct-2019, at 11:21 PM, awokd wrote:
>
> Anil Eklavya:
>> I am trying to install Qubes on HP Pavillion x360 14 inch (cd0056TX). I have
>> tried both in UEFI mode and legacy
I am trying to install Qubes on HP Pavillion x360 14 inch (cd0056TX). I have
tried both in UEFI mode and legacy boot mode. It either doesn’t recognise the
bootable drive (says not bootable drive), or it stops at one point during
booting from the installation pen drive and just stops at one
ethernet working in sys-net
after that. I tried the method given in documentation about PCI devices, but it
says sys-usb doesn’t expose the device (which readlink says is for ethernet).
Regards,
Anil
> On 19-Nov-2019, at 9:58 PM, Anil Eklavya wrote:
>
> I installed the rc2 vers
I installed the rc2 version on HP Pavillion x360. It only got installed in
legacy mode. Doesn’t boot in UEFI or with secure boot.
Also I have moved network-manager to sys-net. I can attach the USB-ethernet
adapter to sys-net, but
Regards,
Anil
> On 20-Oct-2019, at 4:06 AM, Anil Ekla
A better way to backup and restore will make Qubes much more usable, preferably
at some point using something like rsync, as they have already been
considering. This is one crucial feature that makes it difficult for common
users to use this OS as a default.
> On 04-Jan-2020, at 3:08 PM,
it on Windows, Google etc.
Regards,
Anil
> On 04-Jan-2020, at 4:41 PM, dhorf-hfref.4a288...@hashmail.org wrote:
>
> On Sat, Jan 04, 2020 at 03:56:49PM +0530, Anil Eklavya wrote:
>> A better way to backup and restore will make Qubes much more usable,
>> preferably at some point using
Thanks for putting all this information in one place. I was earlier looking to
buy Insurgio Privacy Beast, but it was not clear whether it could be shipped to
India. I then ordered Librem 13.
Is there any comparison available between these two, based on privacy and
security considerations?
22 matches
Mail list logo
