Re: [qubes-users] System and Template updates over Tor

2019-09-22 Thread duc01k
'awokd' via qubes-users: > duc...@disroot.org: > >> I followed the Onionizing Repos guide, commented out the metalinks and >> uncommented the onion lines. On first test (sudo qubes-dom0-update) I >> got a 404 error: >> >>> HTTP Error 404 - Not Found >> >>>

Re: [qubes-users] Copying text to/from Dom0

2019-09-22 Thread 799
Hello schrieb am So., 22. Sep. 2019, 13:40: > > In the official documentation "Copying from (and to) dom0", there is no > mention at all of how to copy text via the clipboard from a domain to > dom0. What is the method to use? Copying from dom0 to an AppVM is ok, as dom0 has to be trusted.

Re: [qubes-users] Making a DispVM permanent

2019-09-22 Thread one7two99
Hello, Von: tetrahedra via qubes-users Betreff: [qubes-users] Making a DispVM permanent Is there a way to turn currently-running DispVM instance into a regular permanent AppVM, which I can delete later? The way I would do it: 1) Open a xterm in the same (!) disposable VM qvm-run xterm

[qubes-users] Copying text to/from Dom0

2019-09-22 Thread duc01k
Sorry guys, another couple of questions! I was trying to manually correct the .onion addresses in the dom0 repos at qubes-dom0.repo and qubes-templates.repo. I had the new address in a text file on a flash drive. I think the advice is not to connect flash drives directly to dom0 so I attached it

[qubes-users] qubes whonix - Tor Control Panel says connection established but I can't browse TOR

2019-09-22 Thread cubecub
Hi, I have a problem with whonix on qubes 4.0.1 - manually upgraded to whonix-15, fedora-30, kernel 4.19. When whonix-sys networking VM is configured to my VPN VM, tor connection gets established which allows me to use TOR browser in 'anon-whonix'. Everything works fine, but... that's not

Re: [qubes-users] qubes whonix - Tor Control Panel says connection established but I can't browse TOR

2019-09-22 Thread 'awokd' via qubes-users
cube...@tutamail.com: > And that's what I'm having a proplem with, unexpectedly. When I set up > 'sys-firewall' or 'sys-net' as netVM for 'whonix-sys' I can't get > 'anon-whonix' to establish Tor Browser connection, can't access any website. > Even whonix-sys 'Tor Control Panel' struggles with

Re: [qubes-users] Trouble building RTL8821CE WiFi drivers

2019-09-22 Thread 'awokd' via qubes-users
awokd: > muhammad19238...@gmail.com: >> Thank you, this worked fine(For future duckduckgoers, I did this on fedora >> in the end, I now feel it makes more sense because the disk usage of the >> template is not avoidable, by having extra templates its just weighing your >> disk down). However I

[qubes-users] Per-VM stream isolation in Whonix

2019-09-22 Thread tetrahedra via qubes-users
Is there any way to automatically do stream isolation on a per-VM basis? For example: I start AppVM "A", with networking via Whonix, and interact with the internet as "Alice" I start AppVM "B", with networking via Whonix, and interact with the internet as "Bob" Naturally I want Alice to

Re: [qubes-users] Per-VM stream isolation in Whonix

2019-09-22 Thread 'awokd' via qubes-users
tetrahedra via qubes-users: > Is there any way to automatically do stream isolation on a per-VM basis? > Right now it appears this is not necessarily the case -- the network > traffic of AppVMs A and B may end up using the same Tor circuits (and > exit nodes). > > Is there a way to set this up?

[qubes-users] Signal on Whonix or Debian

2019-09-22 Thread Stumpy
I have been trying to install Signal on whonix but have run into some issues. Initally I tried the whonix method https://www.whonix.org/wiki/Signal and the first time i started it up it worked fine, but after restarting that appvm it now gives me: user@host:~$ ./signal-start + set -e + sudo

Re: [qubes-users] Signal on Whonix or Debian

2019-09-22 Thread 'awokd' via qubes-users
Stumpy: > W: GPG error: https://updates.signal.org/desktop/apt xenial InRelease: > The following signatures couldn't be verified because the public key is > not available: NO_PUBKEY D980A17457F6FB06 > I also get a very similar message, with the exact same last message "See > apt-secure(8)

Re: [qubes-users] Signal on Whonix or Debian

2019-09-22 Thread Stumpy
On 2019-09-22 11:34, 'awokd' via qubes-users wrote: Stumpy: W: GPG error: https://updates.signal.org/desktop/apt xenial InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D980A17457F6FB06 I also get a very similar message, with the

Re: [qubes-users] Making a DispVM permanent

2019-09-22 Thread brendan . hoar
On Sunday, September 22, 2019 at 7:37:40 AM UTC-4, one7...@gmail.com wrote: > > Hello, > > *Von:* tetrahedra via qubes-users > *Betreff:* [qubes-users] Making a DispVM permanent > > Is there a way to turn currently-running DispVM instance into a regular > permanent AppVM, which I can delete

Re: [qubes-users] How to tell what AppVMs are on the ssd part of my LVM and which are on the regular drive?

2019-09-22 Thread Stumpy
On 2019-09-21 14:48, 'awokd' via qubes-users wrote: Stumpy: I did a fresh install on my computer and (am pretty sure) I setup an LVM (I know I am not using the right termin, sorry) across the SSD drive and the regular drive. The problem is, my computer is now much slower than it was when I was

Re: [qubes-users] How to tell what AppVMs are on the ssd part of my LVM and which are on the regular drive?

2019-09-22 Thread 'awokd' via qubes-users
Stumpy: > This time i did not go the secondary storage route as I was having a > miserable time trying to get it to work, for whatever reason I seem to > understand diagrams of LVM but when it comes to putting the whole thing > together, esp via terminal, i am not getting it. > So as a result,

Re: [qubes-users] Per-VM stream isolation in Whonix

2019-09-22 Thread tetrahedra via qubes-users
On Sun, Sep 22, 2019 at 02:51:00PM +, 'awokd' via qubes-users wrote: tetrahedra via qubes-users: Is there any way to automatically do stream isolation on a per-VM basis? Right now it appears this is not necessarily the case -- the network traffic of AppVMs A and B may end up using the

[qubes-users] U2F on Qubes

2019-09-22 Thread SP
Hello, I followed the instructions here ( https://www.qubes-os.org/news/2018/09/11/qubes-u2f-proxy/) to setup the U2F proxy: - I didn't install anything on sys-usb - I installed `qubes-u2f` in my broswer VMs - I installed `qubes-u2f-dom0` in dom0 and enabled the `qubes-u2f-proxy` service for

Re: [qubes-users] qubes whonix - Tor Control Panel says connection established but I can't browse TOR

2019-09-22 Thread cubecub
Sep 22, 2019, 19:52 by qubes-users@googlegroups.com: > cube...@tutamail.com: > >> And that's what I'm having a proplem with, unexpectedly. When I set up >> 'sys-firewall' or 'sys-net' as netVM for 'whonix-sys' I can't get >> 'anon-whonix' to establish Tor Browser connection, can't access any

[qubes-users] Re: Copying text to/from Dom0

2019-09-22 Thread Andrew David Wong
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 On 9/22/19 6:39 AM, duc...@disroot.org wrote: > In the official documentation "Copying from (and to) dom0", there > is no mention at all of how to copy text via the clipboard from a > domain to dom0. What is the method to use? >

Re: [qubes-users] qubes whonix - Tor Control Panel says connection established but I can't browse TOR

2019-09-22 Thread cubecub
Sep 22, 2019, 22:20 by cube...@tutamail.com: > > > Sep 22, 2019, 19:52 by qubes-users@googlegroups.com: > >> cube...@tutamail.com: >> >>> And that's what I'm having a proplem with, unexpectedly. When I set up >>> 'sys-firewall' or 'sys-net' as netVM for 'whonix-sys' I can't get >>>