Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Wednesday, 28 February 2018 06:37:14 UTC, ThierryIT wrote: > Le samedi 24 février 2018 21:49:49 UTC+2, Alex Dubois a écrit : > > On Wednesday, 21 February 2018 09:01:45 UTC, ThierryIT wrote: > > > Le mercredi 14 février 2018 09:49:37 UTC+2, ThierryIT a écrit : > > > > Le dimanche 11 février 2018 10:08:52 UTC+2, ThierryIT a écrit : > > > > > Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > > > > > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > > > > > > > > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > > > > > > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > > > > > > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > > > > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a > > > > > > écrit : > > > > > > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > > > > >> Not familiar with this ... Will need procediure to follow. > > > > > > >> > > > > > > >> > > > > > > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a > > > > > > >> écrit : > > > > > > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT > > > > > > >>> wrote: > > > > > > No, I am still under R3.2 > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > >> > > > > > > >> > > > > > > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a > > > > > > >> écrit : > > > > > > >> > > > > > > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > > > >>> > > > > > > Nobody ? > > > > > > > > > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT > > > > > > a écrit : > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > > > I have before to install all what I need to the > > > > > > > template (fedora-26) > > > > > > > first. When following your procedure: > > > > > > > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same > > > > > > > for > > > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > > > > > no match for argument > > > > > > > > > > > > > > ideas ? > > > > > > >>> > > > > > > >>> Not quite sure what you are trying to do here. What > > > > > > >>> procedure? What > > > > > > >>> command are you entering? > > > > > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages > > > > > > > might not be in > > > > > > > the Qubes repo yet. > > > > > > >>> > > > > > > >>> Hi, > > > > > > >>> > > > > > > >>> I have not maintained this for some time. So long that I > > > > > > >>> can't remember if the packages had been created/tested, I > > > > > > >>> don't think they have. > > > > > > >>> > > > > > > >>> Best is you follow the steps to build it on a new temporary > > > > > > >>> VM, don't be afraid it should not be too hard: > > > > > > >>> - Execute the yum command in "Build dependancies" > > > > > > >>> - Also install pam-devel > > > > > > >>> - Follow the steps in preparing the build and build > > > > > > >>> - Deploy the code in Dom0 and the USB VM. > > > > > > >>> > > > > > > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so > > > > > > >>> won't probably be able to help until this is done. > > > > > > >>> > > > > > > >>> Any help from someone who is used to packaging under Fedora > > > > > > >>> would be nice. > > > > > > >>> > > > > > > >>> Alex > > > > > > > > > > > > > > Sure, I'll update the doc and post here. However as I said > > > > > > > don't want to touch my Qubes set-up before my upgrade to 4.0 > > > > > > > rc4. So might be in 2-3weeks > > > > > > > > > > > > Did you upgrade to Q4R4 ? > > > > > > >>> > > > > > > >>> I'm in the process. Having issues with PCI path-through of my > > > > > > >>> second NIC that I need to solve. I have to use PV mode for now > > > > > > >>> and not too happy to have too. I'll open another thread if I > > > > > > >>> can't find a way... > > > > > > >> > > > > > > >> Hi Thierry, > > > > > > >> > > > > > > >> I have recompiled it OK. This was working on R3.2. You can test > > > > > > >> it on R4 but no idea if it will work. I hope to h
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le samedi 24 février 2018 21:49:49 UTC+2, Alex Dubois a écrit : > On Wednesday, 21 February 2018 09:01:45 UTC, ThierryIT wrote: > > Le mercredi 14 février 2018 09:49:37 UTC+2, ThierryIT a écrit : > > > Le dimanche 11 février 2018 10:08:52 UTC+2, ThierryIT a écrit : > > > > Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > > > > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > > > > > > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > > > > > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > > > > > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > > > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > > > > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > > > >> Not familiar with this ... Will need procediure to follow. > > > > > >> > > > > > >> > > > > > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a > > > > > >> écrit : > > > > > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > > > No, I am still under R3.2 > > > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > >> > > > > > >> > > > > > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > >> > > > > > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > > >>> > > > > > Nobody ? > > > > > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a > > > > > écrit : > > > > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > > I have before to install all what I need to the > > > > > > template (fedora-26) > > > > > > first. When following your procedure: > > > > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > > > no match for argument > > > > > > > > > > > > ideas ? > > > > > >>> > > > > > >>> Not quite sure what you are trying to do here. What > > > > > >>> procedure? What > > > > > >>> command are you entering? > > > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages > > > > > > might not be in > > > > > > the Qubes repo yet. > > > > > >>> > > > > > >>> Hi, > > > > > >>> > > > > > >>> I have not maintained this for some time. So long that I > > > > > >>> can't remember if the packages had been created/tested, I > > > > > >>> don't think they have. > > > > > >>> > > > > > >>> Best is you follow the steps to build it on a new temporary > > > > > >>> VM, don't be afraid it should not be too hard: > > > > > >>> - Execute the yum command in "Build dependancies" > > > > > >>> - Also install pam-devel > > > > > >>> - Follow the steps in preparing the build and build > > > > > >>> - Deploy the code in Dom0 and the USB VM. > > > > > >>> > > > > > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so > > > > > >>> won't probably be able to help until this is done. > > > > > >>> > > > > > >>> Any help from someone who is used to packaging under Fedora > > > > > >>> would be nice. > > > > > >>> > > > > > >>> Alex > > > > > > > > > > > > Sure, I'll update the doc and post here. However as I said > > > > > > don't want to touch my Qubes set-up before my upgrade to 4.0 > > > > > > rc4. So might be in 2-3weeks > > > > > > > > > > Did you upgrade to Q4R4 ? > > > > > >>> > > > > > >>> I'm in the process. Having issues with PCI path-through of my > > > > > >>> second NIC that I need to solve. I have to use PV mode for now > > > > > >>> and not too happy to have too. I'll open another thread if I > > > > > >>> can't find a way... > > > > > >> > > > > > >> Hi Thierry, > > > > > >> > > > > > >> I have recompiled it OK. This was working on R3.2. You can test it > > > > > >> on R4 but no idea if it will work. I hope to have a bit of time to > > > > > >> look at it this week. > > > > > >> > > > > > >> To compile it if you want to test / debugInR4 > > > > > >> create new VM with network (to get the github) or without network > > > > > >> but you'll have to copy the download to the VM by another mean. > > > > > >> Then: > > > > > >> yum install pam-devel gettext
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Wednesday, 21 February 2018 09:01:45 UTC, ThierryIT wrote: > Le mercredi 14 février 2018 09:49:37 UTC+2, ThierryIT a écrit : > > Le dimanche 11 février 2018 10:08:52 UTC+2, ThierryIT a écrit : > > > Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > > > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > > > > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > > > > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > > > > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > > > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > > >> Not familiar with this ... Will need procediure to follow. > > > > >> > > > > >> > > > > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > > > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > > No, I am still under R3.2 > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > >> > > > > >> > > > > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > >> > > > > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > >>> > > > > Nobody ? > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a > > > > écrit : > > > > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > I have before to install all what I need to the template > > > > > (fedora-26) > > > > > first. When following your procedure: > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > no match for argument > > > > > > > > > > ideas ? > > > > >>> > > > > >>> Not quite sure what you are trying to do here. What > > > > >>> procedure? What > > > > >>> command are you entering? > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages > > > > > might not be in > > > > > the Qubes repo yet. > > > > >>> > > > > >>> Hi, > > > > >>> > > > > >>> I have not maintained this for some time. So long that I can't > > > > >>> remember if the packages had been created/tested, I don't think > > > > >>> they have. > > > > >>> > > > > >>> Best is you follow the steps to build it on a new temporary VM, > > > > >>> don't be afraid it should not be too hard: > > > > >>> - Execute the yum command in "Build dependancies" > > > > >>> - Also install pam-devel > > > > >>> - Follow the steps in preparing the build and build > > > > >>> - Deploy the code in Dom0 and the USB VM. > > > > >>> > > > > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > > > > >>> probably be able to help until this is done. > > > > >>> > > > > >>> Any help from someone who is used to packaging under Fedora > > > > >>> would be nice. > > > > >>> > > > > >>> Alex > > > > > > > > > > Sure, I'll update the doc and post here. However as I said don't > > > > > want to touch my Qubes set-up before my upgrade to 4.0 rc4. So > > > > > might be in 2-3weeks > > > > > > > > Did you upgrade to Q4R4 ? > > > > >>> > > > > >>> I'm in the process. Having issues with PCI path-through of my > > > > >>> second NIC that I need to solve. I have to use PV mode for now and > > > > >>> not too happy to have too. I'll open another thread if I can't find > > > > >>> a way... > > > > >> > > > > >> Hi Thierry, > > > > >> > > > > >> I have recompiled it OK. This was working on R3.2. You can test it > > > > >> on R4 but no idea if it will work. I hope to have a bit of time to > > > > >> look at it this week. > > > > >> > > > > >> To compile it if you want to test / debugInR4 > > > > >> create new VM with network (to get the github) or without network > > > > >> but you'll have to copy the download to the VM by another mean. Then: > > > > >> yum install pam-devel gettext-devel git libtool libyubikey > > > > >> libyubikey-devel -y > > > > >> yum group install "Development Tools" > > > > >> git clone https://github.com/adubois/qubes-app-linux-yubikey.git > > > > >> cd qubes-app-linux-yubikey/ > > > > >> libtoolize --install > > > > >> autoreconf --install > > > > >>
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le mercredi 14 février 2018 09:49:37 UTC+2, ThierryIT a écrit : > Le dimanche 11 février 2018 10:08:52 UTC+2, ThierryIT a écrit : > > Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > > > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > > > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > >> Not familiar with this ... Will need procediure to follow. > > > >> > > > >> > > > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > No, I am still under R3.2 > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > > > >> > > > >> > > > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > >> > > > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > >>> > > > Nobody ? > > > > > > > > > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a > > > écrit : > > > > > > > > > > Hi, > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > I have before to install all what I need to the template > > > > (fedora-26) > > > > first. When following your procedure: > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > no match for argument > > > > > > > > ideas ? > > > >>> > > > >>> Not quite sure what you are trying to do here. What > > > >>> procedure? What > > > >>> command are you entering? > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might > > > > not be in > > > > the Qubes repo yet. > > > >>> > > > >>> Hi, > > > >>> > > > >>> I have not maintained this for some time. So long that I can't > > > >>> remember if the packages had been created/tested, I don't think > > > >>> they have. > > > >>> > > > >>> Best is you follow the steps to build it on a new temporary VM, > > > >>> don't be afraid it should not be too hard: > > > >>> - Execute the yum command in "Build dependancies" > > > >>> - Also install pam-devel > > > >>> - Follow the steps in preparing the build and build > > > >>> - Deploy the code in Dom0 and the USB VM. > > > >>> > > > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > > > >>> probably be able to help until this is done. > > > >>> > > > >>> Any help from someone who is used to packaging under Fedora would > > > >>> be nice. > > > >>> > > > >>> Alex > > > > > > > > Sure, I'll update the doc and post here. However as I said don't > > > > want to touch my Qubes set-up before my upgrade to 4.0 rc4. So > > > > might be in 2-3weeks > > > > > > Did you upgrade to Q4R4 ? > > > >>> > > > >>> I'm in the process. Having issues with PCI path-through of my second > > > >>> NIC that I need to solve. I have to use PV mode for now and not too > > > >>> happy to have too. I'll open another thread if I can't find a way... > > > >> > > > >> Hi Thierry, > > > >> > > > >> I have recompiled it OK. This was working on R3.2. You can test it on > > > >> R4 but no idea if it will work. I hope to have a bit of time to look > > > >> at it this week. > > > >> > > > >> To compile it if you want to test / debugInR4 > > > >> create new VM with network (to get the github) or without network but > > > >> you'll have to copy the download to the VM by another mean. Then: > > > >> yum install pam-devel gettext-devel git libtool libyubikey > > > >> libyubikey-devel -y > > > >> yum group install "Development Tools" > > > >> git clone https://github.com/adubois/qubes-app-linux-yubikey.git > > > >> cd qubes-app-linux-yubikey/ > > > >> libtoolize --install > > > >> autoreconf --install > > > >> ./configure > > > >> make check > > > >> > > > >> files to copy to Dom0 are in folder back-end > > > >> files to copy to USBVM are in folder front-end > > > >> > > > >> USBVM should be a VM started on boot with the USB controller that you > > > >> insert the key in... > > > >> > > > >
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le dimanche 11 février 2018 10:08:52 UTC+2, ThierryIT a écrit : > Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > >> Not familiar with this ... Will need procediure to follow. > > >> > > >> > > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > No, I am still under R3.2 > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > > >> > > >> > > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > >> > > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > >>> > > Nobody ? > > > > > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > > > > > Hi, > > > > > > > > > > > > I am going to install a new sys-usb. > > > I have before to install all what I need to the template > > > (fedora-26) > > > first. When following your procedure: > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > no match for argument > > > > > > ideas ? > > >>> > > >>> Not quite sure what you are trying to do here. What procedure? > > >>> What > > >>> command are you entering? > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might > > > not be in > > > the Qubes repo yet. > > >>> > > >>> Hi, > > >>> > > >>> I have not maintained this for some time. So long that I can't > > >>> remember if the packages had been created/tested, I don't think > > >>> they have. > > >>> > > >>> Best is you follow the steps to build it on a new temporary VM, > > >>> don't be afraid it should not be too hard: > > >>> - Execute the yum command in "Build dependancies" > > >>> - Also install pam-devel > > >>> - Follow the steps in preparing the build and build > > >>> - Deploy the code in Dom0 and the USB VM. > > >>> > > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > > >>> probably be able to help until this is done. > > >>> > > >>> Any help from someone who is used to packaging under Fedora would > > >>> be nice. > > >>> > > >>> Alex > > > > > > Sure, I'll update the doc and post here. However as I said don't want > > > to touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > > > 2-3weeks > > > > Did you upgrade to Q4R4 ? > > >>> > > >>> I'm in the process. Having issues with PCI path-through of my second > > >>> NIC that I need to solve. I have to use PV mode for now and not too > > >>> happy to have too. I'll open another thread if I can't find a way... > > >> > > >> Hi Thierry, > > >> > > >> I have recompiled it OK. This was working on R3.2. You can test it on R4 > > >> but no idea if it will work. I hope to have a bit of time to look at it > > >> this week. > > >> > > >> To compile it if you want to test / debugInR4 > > >> create new VM with network (to get the github) or without network but > > >> you'll have to copy the download to the VM by another mean. Then: > > >> yum install pam-devel gettext-devel git libtool libyubikey > > >> libyubikey-devel -y > > >> yum group install "Development Tools" > > >> git clone https://github.com/adubois/qubes-app-linux-yubikey.git > > >> cd qubes-app-linux-yubikey/ > > >> libtoolize --install > > >> autoreconf --install > > >> ./configure > > >> make check > > >> > > >> files to copy to Dom0 are in folder back-end > > >> files to copy to USBVM are in folder front-end > > >> > > >> USBVM should be a VM started on boot with the USB controller that you > > >> insert the key in... > > >> > > >> Read the doc, it is not polished. > > >> There are mechanisms to detect USBVM compromise, hold-replay attacks, > > >> etc... > > > > > > Starting to do it, everything went fine, but I do not find the way when I > > > need to copy a folfder (not a file) to dom0 ... > > > > > > Thx > > > > You can compress
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > >> Not familiar with this ... Will need procediure to follow. > >> > >> > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > No, I am still under R3.2 > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > >> > >> > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > >> > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > >>> > Nobody ? > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > > Hi, > > > > > > > > I am going to install a new sys-usb. > > I have before to install all what I need to the template > > (fedora-26) > > first. When following your procedure: > > > > > > ykpers has been installed but: I cannot do the same for > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > no match for argument > > > > ideas ? > >>> > >>> Not quite sure what you are trying to do here. What procedure? > >>> What > >>> command are you entering? > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not > > be in > > the Qubes repo yet. > >>> > >>> Hi, > >>> > >>> I have not maintained this for some time. So long that I can't > >>> remember if the packages had been created/tested, I don't think they > >>> have. > >>> > >>> Best is you follow the steps to build it on a new temporary VM, don't > >>> be afraid it should not be too hard: > >>> - Execute the yum command in "Build dependancies" > >>> - Also install pam-devel > >>> - Follow the steps in preparing the build and build > >>> - Deploy the code in Dom0 and the USB VM. > >>> > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > >>> probably be able to help until this is done. > >>> > >>> Any help from someone who is used to packaging under Fedora would be > >>> nice. > >>> > >>> Alex > > > > Sure, I'll update the doc and post here. However as I said don't want > > to touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > > 2-3weeks > > Did you upgrade to Q4R4 ? > >>> > >>> I'm in the process. Having issues with PCI path-through of my second NIC > >>> that I need to solve. I have to use PV mode for now and not too happy to > >>> have too. I'll open another thread if I can't find a way... > >> > >> Hi Thierry, > >> > >> I have recompiled it OK. This was working on R3.2. You can test it on R4 > >> but no idea if it will work. I hope to have a bit of time to look at it > >> this week. > >> > >> To compile it if you want to test / debugInR4 > >> create new VM with network (to get the github) or without network but > >> you'll have to copy the download to the VM by another mean. Then: > >> yum install pam-devel gettext-devel git libtool libyubikey > >> libyubikey-devel -y > >> yum group install "Development Tools" > >> git clone https://github.com/adubois/qubes-app-linux-yubikey.git > >> cd qubes-app-linux-yubikey/ > >> libtoolize --install > >> autoreconf --install > >> ./configure > >> make check > >> > >> files to copy to Dom0 are in folder back-end > >> files to copy to USBVM are in folder front-end > >> > >> USBVM should be a VM started on boot with the USB controller that you > >> insert the key in... > >> > >> Read the doc, it is not polished. > >> There are mechanisms to detect USBVM compromise, hold-replay attacks, > >> etc... > > > > Starting to do it, everything went fine, but I do not find the way when I > > need to copy a folfder (not a file) to dom0 ... > > > > Thx > > You can compress the folder > > tar czvpf QubesBack.tgz name of folder > > And in dom0 > tar xzvpf QubesBack.tgz > > Might have some typo there... > > > > -- > > You received this message because you are subscribed to a topic in the > > Google Groups "qubes-users" group. > > To unsubscribe from this topic, visit > >
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > >> Not familiar with this ... Will need procediure to follow. > >> > >> > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > No, I am still under R3.2 > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > >> > >> > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > >> > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > >>> > Nobody ? > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > > Hi, > > > > > > > > I am going to install a new sys-usb. > > I have before to install all what I need to the template > > (fedora-26) > > first. When following your procedure: > > > > > > ykpers has been installed but: I cannot do the same for > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > no match for argument > > > > ideas ? > >>> > >>> Not quite sure what you are trying to do here. What procedure? > >>> What > >>> command are you entering? > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not > > be in > > the Qubes repo yet. > >>> > >>> Hi, > >>> > >>> I have not maintained this for some time. So long that I can't > >>> remember if the packages had been created/tested, I don't think they > >>> have. > >>> > >>> Best is you follow the steps to build it on a new temporary VM, don't > >>> be afraid it should not be too hard: > >>> - Execute the yum command in "Build dependancies" > >>> - Also install pam-devel > >>> - Follow the steps in preparing the build and build > >>> - Deploy the code in Dom0 and the USB VM. > >>> > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > >>> probably be able to help until this is done. > >>> > >>> Any help from someone who is used to packaging under Fedora would be > >>> nice. > >>> > >>> Alex > > > > Sure, I'll update the doc and post here. However as I said don't want > > to touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > > 2-3weeks > > Did you upgrade to Q4R4 ? > >>> > >>> I'm in the process. Having issues with PCI path-through of my second NIC > >>> that I need to solve. I have to use PV mode for now and not too happy to > >>> have too. I'll open another thread if I can't find a way... > >> > >> Hi Thierry, > >> > >> I have recompiled it OK. This was working on R3.2. You can test it on R4 > >> but no idea if it will work. I hope to have a bit of time to look at it > >> this week. > >> > >> To compile it if you want to test / debugInR4 > >> create new VM with network (to get the github) or without network but > >> you'll have to copy the download to the VM by another mean. Then: > >> yum install pam-devel gettext-devel git libtool libyubikey > >> libyubikey-devel -y > >> yum group install "Development Tools" > >> git clone https://github.com/adubois/qubes-app-linux-yubikey.git > >> cd qubes-app-linux-yubikey/ > >> libtoolize --install > >> autoreconf --install > >> ./configure > >> make check > >> > >> files to copy to Dom0 are in folder back-end > >> files to copy to USBVM are in folder front-end > >> > >> USBVM should be a VM started on boot with the USB controller that you > >> insert the key in... > >> > >> Read the doc, it is not polished. > >> There are mechanisms to detect USBVM compromise, hold-replay attacks, > >> etc... > > > > Starting to do it, everything went fine, but I do not find the way when I > > need to copy a folfder (not a file) to dom0 ... > > > > Thx > > You can compress the folder > > tar czvpf QubesBack.tgz name of folder > > And in dom0 > tar xzvpf QubesBack.tgz > > Might have some typo there... > > > > -- > > You received this message because you are subscribed to a topic in the > > Google Groups "qubes-users" group. > > To unsubscribe from this topic, visit > >
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le samedi 10 février 2018 22:58:15 UTC+2, Alex Dubois a écrit : > > On 10 Feb 2018, at 17:46, ThierryIT wrote: > > > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > >> Not familiar with this ... Will need procediure to follow. > >> > >> > >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > No, I am still under R3.2 > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > >> "https://github.com/adubois/qubes-app-linux-yubikey"; > >> > >> > >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > >> > >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > >>> > Nobody ? > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > > Hi, > > > > > > > > I am going to install a new sys-usb. > > I have before to install all what I need to the template > > (fedora-26) > > first. When following your procedure: > > > > > > ykpers has been installed but: I cannot do the same for > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > no match for argument > > > > ideas ? > >>> > >>> Not quite sure what you are trying to do here. What procedure? > >>> What > >>> command are you entering? > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not > > be in > > the Qubes repo yet. > >>> > >>> Hi, > >>> > >>> I have not maintained this for some time. So long that I can't > >>> remember if the packages had been created/tested, I don't think they > >>> have. > >>> > >>> Best is you follow the steps to build it on a new temporary VM, don't > >>> be afraid it should not be too hard: > >>> - Execute the yum command in "Build dependancies" > >>> - Also install pam-devel > >>> - Follow the steps in preparing the build and build > >>> - Deploy the code in Dom0 and the USB VM. > >>> > >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > >>> probably be able to help until this is done. > >>> > >>> Any help from someone who is used to packaging under Fedora would be > >>> nice. > >>> > >>> Alex > > > > Sure, I'll update the doc and post here. However as I said don't want > > to touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > > 2-3weeks > > Did you upgrade to Q4R4 ? > >>> > >>> I'm in the process. Having issues with PCI path-through of my second NIC > >>> that I need to solve. I have to use PV mode for now and not too happy to > >>> have too. I'll open another thread if I can't find a way... > >> > >> Hi Thierry, > >> > >> I have recompiled it OK. This was working on R3.2. You can test it on R4 > >> but no idea if it will work. I hope to have a bit of time to look at it > >> this week. > >> > >> To compile it if you want to test / debugInR4 > >> create new VM with network (to get the github) or without network but > >> you'll have to copy the download to the VM by another mean. Then: > >> yum install pam-devel gettext-devel git libtool libyubikey > >> libyubikey-devel -y > >> yum group install "Development Tools" > >> git clone https://github.com/adubois/qubes-app-linux-yubikey.git > >> cd qubes-app-linux-yubikey/ > >> libtoolize --install > >> autoreconf --install > >> ./configure > >> make check > >> > >> files to copy to Dom0 are in folder back-end > >> files to copy to USBVM are in folder front-end > >> > >> USBVM should be a VM started on boot with the USB controller that you > >> insert the key in... > >> > >> Read the doc, it is not polished. > >> There are mechanisms to detect USBVM compromise, hold-replay attacks, > >> etc... > > > > Starting to do it, everything went fine, but I do not find the way when I > > need to copy a folfder (not a file) to dom0 ... > > > > Thx > > You can compress the folder > > tar czvpf QubesBack.tgz name of folder > > And in dom0 > tar xzvpf QubesBack.tgz > > Might have some typo there... > > > > -- > > You received this message because you are subscribed to a topic in the > > Google Groups "qubes-users" group. > > To unsubscribe from this topic, visit > >
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
> On 10 Feb 2018, at 17:46, ThierryIT wrote: > > Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : >> On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: >>> On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : >> On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: >> Not familiar with this ... Will need procediure to follow. >> >> >> Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : >>> On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: No, I am still under R3.2 Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: >> "https://github.com/adubois/qubes-app-linux-yubikey"; >> >> >> Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : >> >>> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: >>> Nobody ? Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > Hi, > > > > I am going to install a new sys-usb. > I have before to install all what I need to the template > (fedora-26) > first. When following your procedure: > > > ykpers has been installed but: I cannot do the same for > qubes-yubikey-vm and qubes-yubikey-dom0 : > > no match for argument > > ideas ? >>> >>> Not quite sure what you are trying to do here. What procedure? What >>> command are you entering? > > Are you trying this on Qubes 4.0? Those Yubikey packages might not be > in > the Qubes repo yet. >>> >>> Hi, >>> >>> I have not maintained this for some time. So long that I can't remember >>> if the packages had been created/tested, I don't think they have. >>> >>> Best is you follow the steps to build it on a new temporary VM, don't >>> be afraid it should not be too hard: >>> - Execute the yum command in "Build dependancies" >>> - Also install pam-devel >>> - Follow the steps in preparing the build and build >>> - Deploy the code in Dom0 and the USB VM. >>> >>> I am about to upgrade to Qubes 4.0 rc4 (when released) so won't >>> probably be able to help until this is done. >>> >>> Any help from someone who is used to packaging under Fedora would be >>> nice. >>> >>> Alex > > Sure, I'll update the doc and post here. However as I said don't want to > touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > 2-3weeks Did you upgrade to Q4R4 ? >>> >>> I'm in the process. Having issues with PCI path-through of my second NIC >>> that I need to solve. I have to use PV mode for now and not too happy to >>> have too. I'll open another thread if I can't find a way... >> >> Hi Thierry, >> >> I have recompiled it OK. This was working on R3.2. You can test it on R4 but >> no idea if it will work. I hope to have a bit of time to look at it this >> week. >> >> To compile it if you want to test / debugInR4 >> create new VM with network (to get the github) or without network but you'll >> have to copy the download to the VM by another mean. Then: >> yum install pam-devel gettext-devel git libtool libyubikey libyubikey-devel >> -y >> yum group install "Development Tools" >> git clone https://github.com/adubois/qubes-app-linux-yubikey.git >> cd qubes-app-linux-yubikey/ >> libtoolize --install >> autoreconf --install >> ./configure >> make check >> >> files to copy to Dom0 are in folder back-end >> files to copy to USBVM are in folder front-end >> >> USBVM should be a VM started on boot with the USB controller that you insert >> the key in... >> >> Read the doc, it is not polished. >> There are mechanisms to detect USBVM compromise, hold-replay attacks, etc... > > Starting to do it, everything went fine, but I do not find the way when I > need to copy a folfder (not a file) to dom0 ... > > Thx You can compress the folder tar czvpf QubesBack.tgz name of folder And in dom0 tar xzvpf QubesBack.tgz Might have some typo there... > > -- > You received this message because you are subscribed to a topic in the Google > Groups "qubes-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/qubes-users/BkdTuXZZnwE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > qubes-users+unsubscr...@googlegroups.com. > To post to this group, send email to qubes-users@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/qubes-users/5cc4e21a
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
> On 10 Feb 2018, at 20:16, joevio...@gmail.com wrote: > > Yubikey can have different modes of authentication. I remember looking at > the work of adubois last year as a possible solution. > My Yubikey has a slot used for Challenge/Response, which is MUCH easier to > work with when you have multiple systems and devices. > > I guess YubicoOTP would require something like a custom PAM module... but > with Challenge/Response, my solution was to use the built-in pam_exec.so to > run a very short script when authenticating. My solution is a custom PAM module with password + OTP and master password (to use if compromised USB VM). This OTP slot of the Yubikey is then dedicated for 1 Qubes. I made sure you can’t forget the yubikey in the slot, the OTP is transmitted to USBVM when key is pressed and transmitted to Dom0 when you remove the key. If on key removal you are not authenticated you have to assume that USBVM is compromised and may be used for hold and replay attack. You have to go to a secure area, login with master password, destroy USBVM and reinstall front-end + re-initialise the PAM. If you press by mistake the yubikey, I think you have also a risk of compromise and have to do the same. The challenge response is more practical but I feel less secure (I might be wrong), I have not looked deeply into it. Influencing the generation of the challenge (to be the same as a previous one) via clock. > > The only dependency is to install ykpers on sys-usb as it uses ykchalresp. > > https://gist.github.com/Joeviocoe/929ebde1066a22491bf93ccc9d6c0ba3 > > -- > You received this message because you are subscribed to a topic in the Google > Groups "qubes-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/qubes-users/BkdTuXZZnwE/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > qubes-users+unsubscr...@googlegroups.com. > To post to this group, send email to qubes-users@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/qubes-users/e5d1abf4-4627-4a09-927c-ec4294cc481d%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/EF1BE37B-21E0-44BE-866C-2BE99DD1726E%40gmail.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Yubikey can have different modes of authentication. I remember looking at the work of adubois last year as a possible solution. My Yubikey has a slot used for Challenge/Response, which is MUCH easier to work with when you have multiple systems and devices. I guess YubicoOTP would require something like a custom PAM module... but with Challenge/Response, my solution was to use the built-in pam_exec.so to run a very short script when authenticating. The only dependency is to install ykpers on sys-usb as it uses ykchalresp. https://gist.github.com/Joeviocoe/929ebde1066a22491bf93ccc9d6c0ba3 -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/e5d1abf4-4627-4a09-927c-ec4294cc481d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le samedi 10 février 2018 01:44:36 UTC+2, Alex Dubois a écrit : > On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > > On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > > > On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > > > Not familiar with this ... Will need procediure to follow. > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > > > > > On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > > > > > No, I am still under R3.2 > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > > > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > > > > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > > > > > > > > > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > > > > > >> > > > > > > > > >>> Nobody ? > > > > > > > > >>> > > > > > > > > >>> > > > > > > > > >>> > > > > > > > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a > > > > > > > > >>> écrit : > > > > > > > > >>> > > > > > > > > >>> > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > > > > I have before to install all what I need to the template > > > > > > > > (fedora-26) > > > > > > > > first. When following your procedure: > > > > > > > > > > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > > > > > > > no match for argument > > > > > > > > > > > > > > > > ideas ? > > > > > > > > >> > > > > > > > > >> Not quite sure what you are trying to do here. What > > > > > > > > >> procedure? What > > > > > > > > >> command are you entering? > > > > > > > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might > > > > > > > > not be in > > > > > > > > the Qubes repo yet. > > > > > > > > > > > > Hi, > > > > > > > > > > > > I have not maintained this for some time. So long that I can't > > > > > > remember if the packages had been created/tested, I don't think > > > > > > they have. > > > > > > > > > > > > Best is you follow the steps to build it on a new temporary VM, > > > > > > don't be afraid it should not be too hard: > > > > > > - Execute the yum command in "Build dependancies" > > > > > > - Also install pam-devel > > > > > > - Follow the steps in preparing the build and build > > > > > > - Deploy the code in Dom0 and the USB VM. > > > > > > > > > > > > I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > > > > > > probably be able to help until this is done. > > > > > > > > > > > > Any help from someone who is used to packaging under Fedora would > > > > > > be nice. > > > > > > > > > > > > Alex > > > > > > > > Sure, I'll update the doc and post here. However as I said don't want > > > > to touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > > > > 2-3weeks > > > > > > Did you upgrade to Q4R4 ? > > > > I'm in the process. Having issues with PCI path-through of my second NIC > > that I need to solve. I have to use PV mode for now and not too happy to > > have too. I'll open another thread if I can't find a way... > > Hi Thierry, > > I have recompiled it OK. This was working on R3.2. You can test it on R4 but > no idea if it will work. I hope to have a bit of time to look at it this week. > > To compile it if you want to test / debugInR4 > create new VM with network (to get the github) or without network but you'll > have to copy the download to the VM by another mean. Then: > yum install pam-devel gettext-devel git libtool libyubikey libyubikey-devel -y > yum group install "Development Tools" > git clone https://github.com/adubois/qubes-app-linux-yubikey.git > cd qubes-app-linux-yubikey/ > libtoolize --install > autoreconf --install > ./configure > make check > > files to copy to Dom0 are in folder back-end > files to copy to USBVM are in folder front-end > > USBVM should be a VM started on boot with the USB controller that you insert > the key in... > > Read the doc, it is not polished. > There are mechanisms to detect USBVM compromise, hold-replay attacks, etc... Starting to do it, everything went fine, but I do not find the way when I need to copy a folfder (not a file) to dom0 ... Thx -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web vi
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > > On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > > Not familiar with this ... Will need procediure to follow. > > > > > > > > > > > > Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > > > > On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > > > > No, I am still under R3.2 > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > > > > > > > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > > > > >> > > > > > > > >>> Nobody ? > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit > > > > > > > >>> : > > > > > > > >>> > > > > > > > >>> > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > > > I have before to install all what I need to the template > > > > > > > (fedora-26) > > > > > > > first. When following your procedure: > > > > > > > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > > > > > no match for argument > > > > > > > > > > > > > > ideas ? > > > > > > > >> > > > > > > > >> Not quite sure what you are trying to do here. What procedure? > > > > > > > >> What > > > > > > > >> command are you entering? > > > > > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might > > > > > > > not be in > > > > > > > the Qubes repo yet. > > > > > > > > > > Hi, > > > > > > > > > > I have not maintained this for some time. So long that I can't > > > > > remember if the packages had been created/tested, I don't think they > > > > > have. > > > > > > > > > > Best is you follow the steps to build it on a new temporary VM, don't > > > > > be afraid it should not be too hard: > > > > > - Execute the yum command in "Build dependancies" > > > > > - Also install pam-devel > > > > > - Follow the steps in preparing the build and build > > > > > - Deploy the code in Dom0 and the USB VM. > > > > > > > > > > I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > > > > > probably be able to help until this is done. > > > > > > > > > > Any help from someone who is used to packaging under Fedora would be > > > > > nice. > > > > > > > > > > Alex > > > > > > Sure, I'll update the doc and post here. However as I said don't want to > > > touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > > > 2-3weeks > > > > Did you upgrade to Q4R4 ? > > I'm in the process. Having issues with PCI path-through of my second NIC that > I need to solve. I have to use PV mode for now and not too happy to have too. > I'll open another thread if I can't find a way... Hi Thierry, I have recompiled it OK. This was working on R3.2. You can test it on R4 but no idea if it will work. I hope to have a bit of time to look at it this week. To compile it if you want to test / debugInR4 create new VM with network (to get the github) or without network but you'll have to copy the download to the VM by another mean. Then: yum install pam-devel gettext-devel git libtool libyubikey libyubikey-devel -y yum group install "Development Tools" git clone https://github.com/adubois/qubes-app-linux-yubikey.git cd qubes-app-linux-yubikey/ libtoolize --install autoreconf --install ./configure make check files to copy to Dom0 are in folder back-end files to copy to USBVM are in folder front-end USBVM should be a VM started on boot with the USB controller that you insert the key in... Read the doc, it is not polished. There are mechanisms to detect USBVM compromise, hold-replay attacks, etc... -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/a73944a1-7c80-4ad1-9235-8e43a581f195%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Saturday, 3 February 2018 22:42:46 UTC, Alex Dubois wrote: > On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > > On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > > Not familiar with this ... Will need procediure to follow. > > > > > > > > > > > > Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > > > > On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > > > > No, I am still under R3.2 > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > > > > > > > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > > > > >> > > > > > > > >>> Nobody ? > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> > > > > > > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit > > > > > > > >>> : > > > > > > > >>> > > > > > > > >>> > > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > > > I have before to install all what I need to the template > > > > > > > (fedora-26) > > > > > > > first. When following your procedure: > > > > > > > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > > > > > no match for argument > > > > > > > > > > > > > > ideas ? > > > > > > > >> > > > > > > > >> Not quite sure what you are trying to do here. What procedure? > > > > > > > >> What > > > > > > > >> command are you entering? > > > > > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might > > > > > > > not be in > > > > > > > the Qubes repo yet. > > > > > > > > > > Hi, > > > > > > > > > > I have not maintained this for some time. So long that I can't > > > > > remember if the packages had been created/tested, I don't think they > > > > > have. > > > > > > > > > > Best is you follow the steps to build it on a new temporary VM, don't > > > > > be afraid it should not be too hard: > > > > > - Execute the yum command in "Build dependancies" > > > > > - Also install pam-devel > > > > > - Follow the steps in preparing the build and build > > > > > - Deploy the code in Dom0 and the USB VM. > > > > > > > > > > I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > > > > > probably be able to help until this is done. > > > > > > > > > > Any help from someone who is used to packaging under Fedora would be > > > > > nice. > > > > > > > > > > Alex > > > > > > Sure, I'll update the doc and post here. However as I said don't want to > > > touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in > > > 2-3weeks > > > > Did you upgrade to Q4R4 ? > > I'm in the process. Having issues with PCI path-through of my second NIC that > I need to solve. I have to use PV mode for now and not too happy to have too. > I'll open another thread if I can't find a way... Stupid error... My VM had both a NIC in pass-through and a netVM assigned which was the problem. So I am not stuck on this any more. However I have a lot of VM to put back on track (IP scheme has changed, and probably few other small issues will crop up) and will be off for 2 weeks. But I have not forgotten... -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/fd0bad58-87a2-4b32-ab63-6ac00e56bc2c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Saturday, 3 February 2018 10:12:25 UTC, ThierryIT wrote: > Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > > On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > > Not familiar with this ... Will need procediure to follow. > > > > > > > > > Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > > > On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > > > No, I am still under R3.2 > > > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > > > > > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > > > >> > > > > > > >>> Nobody ? > > > > > > >>> > > > > > > >>> > > > > > > >>> > > > > > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > > > > >>> > > > > > > >>> > > > > > > Hi, > > > > > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > > I have before to install all what I need to the template > > > > > > (fedora-26) > > > > > > first. When following your procedure: > > > > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > > > no match for argument > > > > > > > > > > > > ideas ? > > > > > > >> > > > > > > >> Not quite sure what you are trying to do here. What procedure? > > > > > > >> What > > > > > > >> command are you entering? > > > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not > > > > > > be in > > > > > > the Qubes repo yet. > > > > > > > > Hi, > > > > > > > > I have not maintained this for some time. So long that I can't remember > > > > if the packages had been created/tested, I don't think they have. > > > > > > > > Best is you follow the steps to build it on a new temporary VM, don't > > > > be afraid it should not be too hard: > > > > - Execute the yum command in "Build dependancies" > > > > - Also install pam-devel > > > > - Follow the steps in preparing the build and build > > > > - Deploy the code in Dom0 and the USB VM. > > > > > > > > I am about to upgrade to Qubes 4.0 rc4 (when released) so won't > > > > probably be able to help until this is done. > > > > > > > > Any help from someone who is used to packaging under Fedora would be > > > > nice. > > > > > > > > Alex > > > > Sure, I'll update the doc and post here. However as I said don't want to > > touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in 2-3weeks > > Did you upgrade to Q4R4 ? I'm in the process. Having issues with PCI path-through of my second NIC that I need to solve. I have to use PV mode for now and not too happy to have too. I'll open another thread if I can't find a way... -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/ea2f1c06-b609-4e95-bad5-51ed3b6b9226%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Le vendredi 19 janvier 2018 13:19:29 UTC+2, Alex Dubois a écrit : > On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > > Not familiar with this ... Will need procediure to follow. > > > > > > Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > > On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > > No, I am still under R3.2 > > > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > > > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > > >> > > > > > >>> Nobody ? > > > > > >>> > > > > > >>> > > > > > >>> > > > > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > > > >>> > > > > > >>> > > > > > Hi, > > > > > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > > I have before to install all what I need to the template > > > > > (fedora-26) > > > > > first. When following your procedure: > > > > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > > > no match for argument > > > > > > > > > > ideas ? > > > > > >> > > > > > >> Not quite sure what you are trying to do here. What procedure? What > > > > > >> command are you entering? > > > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not be > > > > > in > > > > > the Qubes repo yet. > > > > > > Hi, > > > > > > I have not maintained this for some time. So long that I can't remember > > > if the packages had been created/tested, I don't think they have. > > > > > > Best is you follow the steps to build it on a new temporary VM, don't be > > > afraid it should not be too hard: > > > - Execute the yum command in "Build dependancies" > > > - Also install pam-devel > > > - Follow the steps in preparing the build and build > > > - Deploy the code in Dom0 and the USB VM. > > > > > > I am about to upgrade to Qubes 4.0 rc4 (when released) so won't probably > > > be able to help until this is done. > > > > > > Any help from someone who is used to packaging under Fedora would be nice. > > > > > > Alex > > Sure, I'll update the doc and post here. However as I said don't want to > touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in 2-3weeks Did you upgrade to Q4R4 ? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/402d9381-52a1-4a0c-b54d-3b8308b2e857%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Friday, 19 January 2018 05:57:16 UTC, ThierryIT wrote: > Not familiar with this ... Will need procediure to follow. > > > Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > > On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > > No, I am still under R3.2 > > > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > > >> > > > > >>> Nobody ? > > > > >>> > > > > >>> > > > > >>> > > > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > > >>> > > > > >>> > > > > Hi, > > > > > > > > > > > > > > > > I am going to install a new sys-usb. > > > > I have before to install all what I need to the template > > > > (fedora-26) > > > > first. When following your procedure: > > > > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > > > no match for argument > > > > > > > > ideas ? > > > > >> > > > > >> Not quite sure what you are trying to do here. What procedure? What > > > > >> command are you entering? > > > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not be in > > > > the Qubes repo yet. > > > > Hi, > > > > I have not maintained this for some time. So long that I can't remember if > > the packages had been created/tested, I don't think they have. > > > > Best is you follow the steps to build it on a new temporary VM, don't be > > afraid it should not be too hard: > > - Execute the yum command in "Build dependancies" > > - Also install pam-devel > > - Follow the steps in preparing the build and build > > - Deploy the code in Dom0 and the USB VM. > > > > I am about to upgrade to Qubes 4.0 rc4 (when released) so won't probably be > > able to help until this is done. > > > > Any help from someone who is used to packaging under Fedora would be nice. > > > > Alex Sure, I'll update the doc and post here. However as I said don't want to touch my Qubes set-up before my upgrade to 4.0 rc4. So might be in 2-3weeks -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/3db55a51-80e2-4c00-94ba-5d3938bc3e95%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
Not familiar with this ... Will need procediure to follow. Le mercredi 17 janvier 2018 23:03:31 UTC+2, Alex Dubois a écrit : > On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > > No, I am still under R3.2 > > > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > > >> > > > >>> Nobody ? > > > >>> > > > >>> > > > >>> > > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > >>> > > > >>> > > > Hi, > > > > > > > > > > > > I am going to install a new sys-usb. > > > I have before to install all what I need to the template (fedora-26) > > > first. When following your procedure: > > > > > > > > > ykpers has been installed but: I cannot do the same for > > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > > > no match for argument > > > > > > ideas ? > > > >> > > > >> Not quite sure what you are trying to do here. What procedure? What > > > >> command are you entering? > > > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not be in > > > the Qubes repo yet. > > Hi, > > I have not maintained this for some time. So long that I can't remember if > the packages had been created/tested, I don't think they have. > > Best is you follow the steps to build it on a new temporary VM, don't be > afraid it should not be too hard: > - Execute the yum command in "Build dependancies" > - Also install pam-devel > - Follow the steps in preparing the build and build > - Deploy the code in Dom0 and the USB VM. > > I am about to upgrade to Qubes 4.0 rc4 (when released) so won't probably be > able to help until this is done. > > Any help from someone who is used to packaging under Fedora would be nice. > > Alex -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/79a97c8e-5626-4ab0-9625-764dabaf45ba%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Wednesday, 17 January 2018 15:15:45 UTC, ThierryIT wrote: > No, I am still under R3.2 > > Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > >> > > >>> Nobody ? > > >>> > > >>> > > >>> > > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > >>> > > >>> > > Hi, > > > > > > > > I am going to install a new sys-usb. > > I have before to install all what I need to the template (fedora-26) > > first. When following your procedure: > > > > > > ykpers has been installed but: I cannot do the same for > > qubes-yubikey-vm and qubes-yubikey-dom0 : > > > > no match for argument > > > > ideas ? > > >> > > >> Not quite sure what you are trying to do here. What procedure? What > > >> command are you entering? > > > > Are you trying this on Qubes 4.0? Those Yubikey packages might not be in > > the Qubes repo yet. Hi, I have not maintained this for some time. So long that I can't remember if the packages had been created/tested, I don't think they have. Best is you follow the steps to build it on a new temporary VM, don't be afraid it should not be too hard: - Execute the yum command in "Build dependancies" - Also install pam-devel - Follow the steps in preparing the build and build - Deploy the code in Dom0 and the USB VM. I am about to upgrade to Qubes 4.0 rc4 (when released) so won't probably be able to help until this is done. Any help from someone who is used to packaging under Fedora would be nice. Alex -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/24175c57-8792-4beb-b1b4-ab96f9beccdf%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
No, I am still under R3.2 Le mercredi 17 janvier 2018 16:54:58 UTC+2, awokd a écrit : > On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > > > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > >> > >>> Nobody ? > >>> > >>> > >>> > >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > >>> > >>> > Hi, > > > > I am going to install a new sys-usb. > I have before to install all what I need to the template (fedora-26) > first. When following your procedure: > > > ykpers has been installed but: I cannot do the same for > qubes-yubikey-vm and qubes-yubikey-dom0 : > > no match for argument > > ideas ? > >> > >> Not quite sure what you are trying to do here. What procedure? What > >> command are you entering? > > Are you trying this on Qubes 4.0? Those Yubikey packages might not be in > the Qubes repo yet. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/79f4fc4c-14a6-4d44-a7b3-e752aa8cdb29%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Wed, January 17, 2018 2:09 pm, ThierryIT wrote: > "https://github.com/adubois/qubes-app-linux-yubikey"; > > > Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > >> On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: >> >>> Nobody ? >>> >>> >>> >>> Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : >>> >>> Hi, I am going to install a new sys-usb. I have before to install all what I need to the template (fedora-26) first. When following your procedure: ykpers has been installed but: I cannot do the same for qubes-yubikey-vm and qubes-yubikey-dom0 : no match for argument ideas ? >> >> Not quite sure what you are trying to do here. What procedure? What >> command are you entering? Are you trying this on Qubes 4.0? Those Yubikey packages might not be in the Qubes repo yet. -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/aa0b03063ad9be3e537c78c4eca9b5f7.squirrel%40tt3j2x4k5ycaa5zt.onion. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
"https://github.com/adubois/qubes-app-linux-yubikey"; Le mercredi 17 janvier 2018 16:05:52 UTC+2, awokd a écrit : > On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > > Nobody ? > > > > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > > > >> Hi, > >> > >> > >> I am going to install a new sys-usb. > >> I have before to install all what I need to the template (fedora-26) > >> first. When following your procedure: > >> > >> > >> ykpers has been installed but: I cannot do the same for qubes-yubikey-vm > >> and qubes-yubikey-dom0 : > >> > >> no match for argument > >> > >> ideas ? > > Not quite sure what you are trying to do here. What procedure? What > command are you entering? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/f465fd71-bb25-4050-91be-ca577635c7f0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [qubes-users] Re: sys-usb / template install yubikey tools ?
On Wed, January 17, 2018 1:09 pm, ThierryIT wrote: > Nobody ? > > > Le mercredi 17 janvier 2018 09:23:34 UTC+2, ThierryIT a écrit : > >> Hi, >> >> >> I am going to install a new sys-usb. >> I have before to install all what I need to the template (fedora-26) >> first. When following your procedure: >> >> >> ykpers has been installed but: I cannot do the same for qubes-yubikey-vm >> and qubes-yubikey-dom0 : >> >> no match for argument >> >> ideas ? Not quite sure what you are trying to do here. What procedure? What command are you entering? -- You received this message because you are subscribed to the Google Groups "qubes-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to qubes-users+unsubscr...@googlegroups.com. To post to this group, send email to qubes-users@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/qubes-users/10c35cb9c19a9aa99269b0bce776f1f5.squirrel%40tt3j2x4k5ycaa5zt.onion. For more options, visit https://groups.google.com/d/optout.