Re: (RADIATOR) RedHat 9 / FreeTDS ??

Well ... that did it ... on Redhat 9 I had to use the following DBD-Sybase-0.94 FreeTDS-0.53 Using Radiator 3.6 - Original Message - From: "Mike McCauley" <[EMAIL PROTECTED]> To: "Jacob Leaver" <[EMAIL PROTECTED]>; "Jamie Orzechowski" <[E

(RADIATOR) RedHat 9 / FreeTDS ??

Hello ... I just built a new RedHat 9 box and installed Radiator 3.6 + Patches Using FreeTDS and DBD::Sybase to connect to a MSSQL server for authentication. I did a LC_LANG fix and radiator starts fine... I am also able to run my test scripts which query the same SQL server as radiator uses. Th

(RADIATOR) RedHat 9 / FreeTDS ??

Hello .. I tried downgrading to Radiator 3.2 to see if anything would change ... when I did a "make test" I got errors ... On version 3.6 I did not get any errors ... perhaps something could be wring which is causing the SQL request to fail ... Please let me know what these errors are ... Startin

(RADIATOR) Contructing a radius packet

Hello .. I am trying to get IPSentry to send an authentication requets to radiator so I can see if radius is up and working correctly ... how can I construct a radius packet so it sends and auth request with Username: uptimecheck pass: ds83hjd93 I am able to do one now without the password and

(RADIATOR) restartWrapper crashing

Hello .. I am having a strange problem with restartWrapper ... for no reason the process will terminate I call restartWrapper with /usr/local/bin/restartWrapper -delay 2 -mail [EMAIL PROTECTED] "/usr/bin/radiusd -foreground" & A "ps ax" shows the following ... 26946 pts/1S 0:00 /usr/b

(RADIATOR) Concurrency?

user?? --- Jamie Orzechowski RipNET System Admin Tel.: 888-509-6677 x190 Tel.: 613-342-1579 (Direct) Page: 613-341-0883 EMail: [EMAIL PROTECTED] --- === Archive at http://www.open.com.au/archives/radiator/ Announcemen

(RADIATOR) Logging of password??

Hello! ... I just upgraded to 2.17.1   Our old radius used to log the password typed by the user which was very informative for tech support purposes ... I was wondering if anyone know how to do this in radiator via a .cfg file or what to modify in the .pm modules to make this work ... any id

(RADIATOR) logging accounting to a seperate server?

Hello ... I would like to know if it's possible to authenticate via one method (AuthBy FILE) and do accounting via AuthBy RODOPI so all auth requests are handled via Auth FILE and all Accounting requests are handled via AuthBy RODOPI any ideas how this can be done? === Archive at http://www.st

(RADIATOR) builddbm

I am trying to use builddbm but I keep getting an error .. any ideas? Can't call method "parse" on an undefined value at /usr/local/bin/builddbm line 156, chunk 2. My users file looks like # 912998114 -- Robert McLennan Password = "" Framed-Protocol = PPP, Framed-Ro

(RADIATOR) logging accounting to a seperate server?

Hello ... I would like to know if it's possible to authenticate via onemethod (AuthBy FILE) and do accounting via AuthBy RODOPIso all auth requests are handled via Auth FILE and all Accounting requestsare handled via AuthBy RODOPIany ideas how this can be done?

(RADIATOR) Auth DBFILE ??

I have switched to AuthBy DBFILE and I have a cron job rebuilding the DBFILE every 5 minutes ... I do: /usr/bin/builddbm -u /usr/local/etc/raddb/users I am noticing that while the DBFILE is being built that nobody can login .. I get the following error ... any ideas how to correct this?? Fri F

(RADIATOR) Strange!

Hello ... I have 2 servers running radiator ... when both are doing authentication they will BOTH crash at the same time and I will get a page from restartWrapper saying it has restarted the service on one machine then seconds later on the seconds server ... if I make the second server only

(RADIATOR) SNMP Problems ...

hello ... I have a strange SNMP problem ... If I add the to my cfg I get a bunch of message saying it can;t find the Handler for this request ... if I comment out the SNMP section it works without any problems ... any ideas?? here is my config ... Community xx Identi

(RADIATOR) Alive Records?

Hello ... I am noticing a bunch of "Alive" records in my details log ... is there any way to disable these? .. I only want start / stop ... or is this a setting in my NAS? === Archive at http://www.starport.net/~radiator/ Announcements on [EMAIL PROTECTED] To unsubscribe, email '[EMAIL PROTECTED

Re: (RADIATOR) Alive Records?

Subject: RE: (RADIATOR) Alive Records? > It is a NAS setting. > > /Ingvar > > -----Original Message- > From: Jamie Orzechowski [mailto:[EMAIL PROTECTED]] > Sent: den 13 mars 2001 18:06 > To: [EMAIL PROTECTED] > Subject: (RADIATOR) Alive Records? > > > Hello ...

(RADIATOR) Radiator 2.18.x AutoRODOPI Fails

Hello ... I have upgraded to Radiator 2.18.2 from 2.17.x ... AuthRODOPI no longer works now ... If I replace AuthRODOPI.pm from 2.17 it works fine ... this is RODOPI 4.04 here is my config ... I made a very simple config for this AuthByPolicy ContinueWhileReject RewriteUsername s/^(.*)\\(.*)/$

(RADIATOR) first time user

Hi There ... I just just installing Radiator on Redhat 5.2 for the first time ... I got perl Makefile.PL and then make to run fine (all passed) ... then I run perl radiusd -config_file goodies/simple.cfg so that I can test it and it justs sits there and I see no error messages or success mess

(RADIATOR) radpwtsts problems

I got radiator installed annd setup my radius.cfg   I copied the dictionary.usr to /usr/local/etc/raddb/dictionary   also moved the users file into there     when I run radpwtst -user xxx -password xxx I get the following error ...   sending Access-Request... Can't call method "identifier"

(RADIATOR) another prob

I got radiator to work with /etc/passwd now so it authenticates from there ... but I also have a users file with a few accounts setup to get static IP's ... I checked my users file and it's fine but I always get a rejected for a user in the users file any ideas???   it says DEBUG: Handl

No Subject

Hi There ... I was wondering if anyone had a config for me that will convert all usernames to lowercase and also strip off anything after (and including) the @ symbol ... some people try and login with their [EMAIL PROTECTED] which will not work ... it will have to do the converting of the name be

(RADIATOR) Rewrite rules

uot; which was supposed to be "mhz" ... so the rewrite rules let the user log in but did not correctly send his rewrote userid ... any ideas? run radiator on the accounting machine also? - Original Message - From: Stephen Roderick <[EMAIL PROTECTED]> To: Jamie Orzechow

(RADIATOR) first time user

I am now getting ready to setup radiator using RODOPI and I have a few questions   1) When I set my Radius accounting server in my NAS do I put the IP of my RODOPI server or do I use the IP of the radiator server?   Can someone please send me an example config that does the following   Auth

(RADIATOR) DBD-Sybase

I am using Radiator and RODOPI as my billign system .. I can't seem to find the Sybase Client needed for Radiator .. All I have found is the DBD-Sybase   DBD-Sybase-0.13.tar.gz   anyone know where I can find the Sybase client library?

(RADIATOR) Sybase

I have installed DBI for Linux and now I am trying to get DBD-Sybase-0.13.tar.gz working correctly .. I try a "perl Makefile.PL" and I get the following   // Please set SYBASE in CONFIG, or set the $SYBASE environment variable at Makefile.PL line 71, chunk 33. //   anyone know what this sho

(RADIATOR) hmm

I think I was mistekn with the SYbase DBD stuff for RODOPI ... could someone please clear this up for me ...   I am running RODOPI and MS SQL 6.5 and Radiator on UNIX   What are the DBD PERL modules I should use in order to get it working correctly ... I am thinking I should use the ODBC ones

(RADIATOR) Sybase

I got the http://sk.php.net/extra/ctlib-linux-elf.tar.gz and untarred it to /opt/sybase I then got the DBD-Sybase and edited the CONFIG file and changed "EXTRA_LIBS=-linsck" as it says this is needed for linux ... I then run a perl Makefile.PL and get the following [root@Mail DBD-Sybase-0.13]#

(RADIATOR) Sybase problems!!

nce to `bsd_tcp' make[1]: *** [perl] Error 1 make[1]: Leaving directory `/tmp/DBD-Sybase-0.13' make: *** [perl] Error 2 - Original Message - From: Mike McCauley <[EMAIL PROTECTED]> To: Jamie Orzechowski <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Friday, May 14, 1

(RADIATOR) sybase prob

In addition to my last post   if I COMMENT out the LINKTYPE=STATIC (it's commented by default)   I get the following when I do I "make test"     [root@Mail DBD-Sybase-0.13]# make testPERL_DL_NONLAZY=1 /usr/bin/perl -I./blib/arch -I./blib/lib -I/usr/lib/perl5/i386-linux/5.00405 -I/usr/lib/per

(RADIATOR) RODOPI Online Usage URL

I am in the process of setting up RODOPI billing software right now ...   RODOPI has a special area to enter ONLINE USAGE URL   this is basically ftp://user:[EMAIL PROTECTED]/var/log/radius/logfile   I was wondering if this is required or does Radator automatically connect the the RODOPI mac

(RADIATOR) Authenticate Anything

I currently have a hacked livingston radius running which authenticates anything ... this is used as a backup radius server in case our main on ever went down. I was just wondering if Radiator can do this via the .cfg ?? if so could someone shoot me a sample config ... === Archive at http://www

(RADIATOR) SPAM SPAM SPAM SPAM SPAM

Hi There ... I am using radiator and RODOPI (excellent) for billing at our ISP ... the problem with RODOPI is that it does not have a function to find IP addresses for SPAM issues ... I do have all the radius logs sitting on my unix box though ... I was wondering if anyone knows of a program that

(RADIATOR) Proxy Setup

I am using RODOPI as our billing system here and would like to setup RODOPI's roaming feature ... could someone give me a quick config on how to do this?? my current config is: PasswordLogFileName /var/log/radius/password.log AuthByPolicy ContinueWhileReject DBSource

(RADIATOR) Config HELP

username is checked against RODOPI (or the local radius server)... could someone please provide me with a config that does this ... thanks!! --- Jamie Orzechowski System/Network Admin RipNET Internet Services Tel.: 888-509-6677 ext 293 Tel.: 613-342-3946

Re: (RADIATOR) Config HELP

my problem is that I do not know what the address of the user will be ... this is for a roaming setup ... the user will login as [EMAIL PROTECTED] so I cannot use correct? - Original Message - From: Aaron Miles <[EMAIL PROTECTED]> To: Jamie Orzechowski <[EMAIL PROTECT

(RADIATOR) Tracking SPAMMERS

I am having a problem with spammers and need a way to track them down. what I need is a config that will send the: date start time stop time username ip address callerID and store this into an SQL database (MS SQL 6.5) ... I will then be able to make querys and pull up the info I need ... any

(RADIATOR) SQL accounting

I have successfully created a database call ACCOUNTING on my SQL server with all the tables I need ... how can I make it authenticate via RODOPI as usual and also send just the accounting records to another database (while still sending them to my rodopi database also) my config which works fine

(RADIATOR) proxy setup

28 15:29:15 1999: DEBUG: Packet dump: *** Received from 208.137.248.41 port 1645 etc etc... -- Jamie Orzechowski RipNET Internet Services System/Network Administrator Tel.: 888-509-6677 ext 293 Tel.: 613-342-3946 ext 293 Fax.: 613-342-8672 EMail.: [EMAIL PROTECTED

(RADIATOR) little prob

olicy ContinueWhileReject DBSourcedbi:Sybase:rodopi DBUsername Rodopi DBAuth xx Filename /usr/local/etc/raddb/users ---------- Jamie Orzechowski RipNET Internet Services System/Network

(RADIATOR) script question

I have a script that will preform SQL commands via my unix machine .. the problem is that I need to run a large (more than 2 line) SQL statement I have the line: $sth = $dbh->prepare("UPDATE abacbill..logins set Password='$password' where UserName='$username' AND DialAccount = 1"); this is the

(RADIATOR) 3Com Total COntro ldisctionary

Hi There ... I am using the USR Total control dictionary but I (I have TC's) ... but I keep getting the same message in my radius logs Mon Aug 16 21:36:49 1999: ERR: Attribute number 38998 (vendor 429) is not defined in your dictionary Mon Aug 16 21:36:49 1999: ERR: Attribute number 39000 (vendor

(RADIATOR) radpwtst

I am trying to get radpwtst to work to test password via a command line ... I try using radpwtst -noacct -user username -password and I get sending Access-Request... No reply any ideas how to get this working ??? Jamie Orzechowski RipNET Internet

(RADIATOR) Sybase Problems

I am trying to get my Unix (Redhat 6.0) machine to connect the MS SQL 6.5. I want to use the FreeTDS module my radius config looks like AuthByPolicy ContinueWhileReject DBSourcedbd:FreeTDS:rodopi DBUsername Rodopi DBAuth

(RADIATOR) DBD:Sybase

Hi There .. .I am trying to Build DBD:Sybase I have installed sybase-ase-11.0.3.3-2.i386.rpm I have installed DBI-1.13 I have Obtained DBD-Sybase-0.20 The ASE and DBI install go fine. I then come to the DBD-Sybase install I modified the "CONFIG" file to say SYBASE=/opt/sybase EXTRA_LIBS=-