Ah; thanks, I see it there. Something is amiss with that. "eval... ; cat -v"
output below.
Weylin
[rancid@nsgv-prod-59 ~]$ eval `rancid -t cisco-wlc5 -C
cumm111-wism-aca05.bu.edu` &> output
[rancid@nsgv-prod-59 ~]$ cat -v output
cumm111-wism-aca05.bu.edu
spawn ssh -2 -c
We actually do not have a banner, but your mention of that reminds me that
indeed, when doing some updates recently we enabled login-tip (
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/login-tip-edit-system.html/)
which is almost certainly putting
Fri, Jul 27, 2018 at 08:18:08AM -0500, Chris Wopat:
> Hi folks,
>
> Last year I commented on an issue we're seeing across many Juniper devices.
> I neglected to follow up on Heasley's response then but are seeing it a lot
> more frequently now, perhaps related to some OS upgrades or something
Thu, Jul 26, 2018 at 01:34:06AM +, james Di Trapani:
> Hi All,
>
>
> Using latest version of Rancid and xilogin to connect to Huawei AR169's, when
> trying to pass the command 'system-view' it appears that xilogin gets stuck
> and cannot interpret the prompt changing from '>' to ']', has
Thu, Jul 26, 2018 at 09:25:54PM +, Piegorsch, Weylin William:
> Hello,
>
> I tried the SMC script and, well...
>
> Weylin
>
>
> [rancid@nsgv-prod-59 ~]$ NOPIPE=yes rancid -d -t smc babc273-1032es02.bu.edu
> loadtype: device type smc
> loadtype: found device type smc in
Fri, Jul 27, 2018 at 12:08:37PM +, Piegorsch, Weylin William:
> I did some experimenting, issuing the "config paging disable" CLI command on
> initial login seems to eliminate the paging issue, similar to the ASA
> "terminal pager 0" or the IOS "terminal length 0".
> weylin
wlogin should
Hi Heasley and folks,
Sept 2017 i sent a note in with some proposed tweaks to a Fortigate. to
filter out some additional chattiness, see:
http://www.shrubbery.net/pipermail/rancid-discuss/2017-September/009871.html
http://www.shrubbery.net/pipermail/rancid-discuss/2017-June/009643.html
A few
Hi folks,
Last year I commented on an issue we're seeing across many Juniper devices.
I neglected to follow up on Heasley's response then but are seeing it a lot
more frequently now, perhaps related to some OS upgrades or something else.
Thread was here:
I did some experimenting, issuing the "config paging disable" CLI command on
initial login seems to eliminate the paging issue, similar to the ASA "terminal
pager 0" or the IOS "terminal length 0".
weylin
On 7/27/18, 8:01 AM, "Piegorsch, Weylin William" wrote:
When I login as myself and
