date:20190604

[RBW] Ergon grips/ map, waive, Jones bars

2019-06-04 Thread Joe Bernard

I've used them on V-O Milan bars, similar to Wavie. Loved it. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/85d6cf0d-5d6c-45c6-85ec-d587c79451e0%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread phil k

I replied hopefully it went thru

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/a7a86471-7013-41a8-8ace-645a6f2f699b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Ergon grips/ map, waive, Jones bars

2019-06-04 Thread Drw

I have a set of Jones copied soma bars on my bubbe (Jones was out of stock). 
They are similar to the wavie and map/ahearne bars. The latter I had on a 
different bike and loved. 
I can’t ride the bubbe even on short rides without wrist pain though. 
I’ve recently put Ergon grips on my brompton and they’ve been surprisingly 
revelatory, so I’m wondering if anyone uses them on a wavie shaped bar. Also, 
If so, did it solve any problems for you?
The subtext of this is that my bubbe has a threadless crust cargo fork on it, 
so raising and lowering the bars is not as easy as with a quill. It does have a 
relatively short and up-jutting stem on it though, set at saddle height roughly.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c99941cd-af3d-4dd6-8e07-6a8ebe7ad187%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: Riv HHH tandem fundraiser 2.0, updated campaign!

2019-06-04 Thread Alex Wirth- Owner, Yellow Haus Bicycles

Hello All,
The last disbursement of $368.07 went to Riv today. Along with a healthy 
donation of parts, we are well positioned to start building when the 
Hubbahs land from Taiwan. I'll keep you posted as we get through the build 
& delivery...

Cheers!

Alex

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/ec150c18-5704-4196-b0f9-7e07bc1d61d9%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread Joe Bernard

Ah, you have more reach in the legs than I do. With those Albas this bike 
should be perfect for you. And I love the color!

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/29e9e418-a6d5-4c3f-863b-14544fa8c7cb%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Bill Lindsay

Dave

The bar end "pod", the part that goes into the handlebar, has a square 
shaped protuberence on it.  The first piece you put on is a chrome base 
piece.  It looks like this:


See how the external shape of that washer piece is round?  See how there's 
a raised inner part that is round, but it has a bump, a keyway part off 
that raised part.  See it?  When you put that chrome washer piece onto the 
square protuberance on the barcon pod, that bump, that key part is pointing 
DOWN.  It's not totally straight down, because that square thing will have 
a bit of an angle to it, but it is absolutely the MOST DOWN of the four 
possible choices.  When the washer is in that position, the shifter will 
fit onto the washer in only one position.  From there, you should find all 
your clicks.  You will conclude that you previously had that washer rotated 
90 degrees and you lost 90 degrees of your clicks.  

Bill Lindsay
El Cerrito, CA

On Tuesday, June 4, 2019 at 4:12:24 PM UTC-7, Dave Redmon wrote:
>
> Joe, you may be onto something important. With the cable released from the 
> RD and the 9 speed bar end shifter in index mode, I hear only 3 or 4 clicks 
> as I move the shifter from bottom to top. 
>
> I've used similar Shimano BES over the years (mostly 7 speed), so I felt 
> comfortable installing this 9 speed shifter on the right side of the 
> handlebar. 
>
> I took the BES apart and put it back together in the same way I've 
> successfully installed 7 speed units, but I get the same results. Where can 
> I find accurate instructions on how to do this?
>
> Btw, I've removed the barrel adjuster and installed the cable on the side 
> of the bolt nearest me--not behind the bolt as I usually do. (Bill from El 
> Cerrito had advised this in a similar situation some time earlier on this 
> board.) 
>
> This us quite a learning experience for me.
>
> Dave
>
> On Tue, Jun 4, 2019, 9:20 AM Joe Bernard  
> wrote:
>
>> Going back over your original post, it sounds like it's indexing 
>> correctly, just not all the way across the cassette. I think your LBS 
>> mounted the bar-end in the wrong orientation and it's not clicking through 
>> all 9 steps. Everyone who's used these has made this mistake at least once. 
>>
>> -- 
>> You received this message because you are subscribed to a topic in the 
>> Google Groups "RBW Owners Bunch" group.
>> To unsubscribe from this topic, visit 
>> https://groups.google.com/d/topic/rbw-owners-bunch/Nx-IWvyX4RI/unsubscribe
>> .
>> To unsubscribe from this group and all its topics, send an email to 
>> rbw-owne...@googlegroups.com .
>> To post to this group, send email to rbw-owne...@googlegroups.com 
>> .
>> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/6477c648-9095-4fe1-8437-376e1dfd8d25%40googlegroups.com
>> .
>> For more options, visit https://groups.google.com/d/optout.
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/2eafc216-da70-43ec-a714-981b09531e80%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Dave Redmon

Joe, you may be onto something important. With the cable released from the
RD and the 9 speed bar end shifter in index mode, I hear only 3 or 4 clicks
as I move the shifter from bottom to top.

I've used similar Shimano BES over the years (mostly 7 speed), so I felt
comfortable installing this 9 speed shifter on the right side of the
handlebar.

I took the BES apart and put it back together in the same way I've
successfully installed 7 speed units, but I get the same results. Where can
I find accurate instructions on how to do this?

Btw, I've removed the barrel adjuster and installed the cable on the side
of the bolt nearest me--not behind the bolt as I usually do. (Bill from El
Cerrito had advised this in a similar situation some time earlier on this
board.)

This us quite a learning experience for me.

Dave

On Tue, Jun 4, 2019, 9:20 AM Joe Bernard  Going back over your original post, it sounds like it's indexing
> correctly, just not all the way across the cassette. I think your LBS
> mounted the bar-end in the wrong orientation and it's not clicking through
> all 9 steps. Everyone who's used these has made this mistake at least once.
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "RBW Owners Bunch" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/rbw-owners-bunch/Nx-IWvyX4RI/unsubscribe
> .
> To unsubscribe from this group and all its topics, send an email to
> rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/rbw-owners-bunch/6477c648-9095-4fe1-8437-376e1dfd8d25%40googlegroups.com
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/CAHuE3ybjKv1aZma0koWLjCF%3DchBgJUOonMQyNf4Rd8g8-pm1vA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: daily post ur riv

2019-06-04 Thread 'jinxed' via RBW Owners Bunch

Chris - THAT is one awesome bike! Hits all the "just right" buttons.

On Monday, May 27, 2019 at 5:31:24 PM UTC-6, Chris Balaschak wrote:
>
> My Legolas with a fresh set of somafab tires and some routine maintenance. 
> Ready for a hot and dry day in the nation's old city, St Augustine, 
> Florida. 
> https://photos.app.goo.gl/uBPdxnYHQRa7n9nJ6

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/9ea11233-488b-4025-91a7-e48b6fa6f191%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread REC (Roberta)

PM Sent.  Also, please check spam folder.

I'm 5'7", with PBH of 83.  I'm thinking "good fit."

Roberta

On Tuesday, June 4, 2019 at 3:12:18 PM UTC-4, phil k wrote:

> Also my PBH is 79 last time i checked.
>
> On Tuesday, June 4, 2019 at 2:45:21 PM UTC-4, phil k wrote:
>>
>> Hi Roberta,
>>
>> Standover with 42mm Pasela is 31.5 to 31.75 inches. I wear 29 in seam 
>> jeans. With shoes, the top tube touches my pelvis with both feet flat on 
>> concrete. I'm 5ft 6", and have shorter arms and shorter legs.
>>
>> Dyno light would attach via mount on fork crown, which I would supply and 
>> put together before shipping.
>>
>> Hope that helps,
>>
>> Phil
>>
>> On Tuesday, June 4, 2019 at 12:23:07 PM UTC-4, REC (Roberta) wrote:
>>>
>>> Is the stand-over 81.5, like in the chart? (I don't know what tire size 
>>> Riv used to measure).  Without the lamp holder, how do you attach the 
>>> lamp?  Does one need to purchase a new lamp holder?
>>>
>>> Thanks.
>>>
>>> On Tuesday, June 4, 2019 at 8:58:18 AM UTC-4, phil k wrote:
>>>
 I was able to part out the rack/basket/nitto lamp holder. So price drop 
 to reflect - $1900 plus bike flights shipping.

 On Tuesday, May 28, 2019 at 6:08:16 PM UTC-4, phil k wrote:
>
> Lot of interest, but bike is still available. Price adjustment - 
> Complete bike minus Outershell basket bag, saddle, and pedals - $2075 
> plus 
> bike flights shipping.
>
> I'll put up more detailed pictures album when I can get the chance 
> today.
>
> Build includes:
>
> -MIT AHH frameset
> -Bottom bracket
> -Headset
> -Seatpost
> -Shimano Ultegra bar end shifters
> -Nitto Albatross heat-treated aluminum handlebars
> -Nitto Tallux stem
> -Gilles Berthoud leather bar wrap (can include leftover extra)
> -Shimano brake levers
> -Paul Component funky monkey front brake hanger
> -Nitto Reneherse rinko rear cable hanger
> -Paul Component Racer centermount brakes (pair)
> -Paul Component polished silver moon unit cable yokes (pair)
> -Riv Silver crankset wide low 38/24 170mm arms
> -B IQ-XS dyno front light
> -B toplight line small tail light
> -B bracket for saddle rail for tail light (allows taillight to be 
> attached to saddle rails)
> -Sheldon fender nuts (pair)
> -Nitto lamp bracket right side
> -XT Cassette 11-32 9 speed
> -XT rear derailleur 772 9 speed
> -Shimano front derailleur
> -Nitto Marks Rack with extended struts
> -Grey buckle strap to reinforce mark's rack to handlebars
> -Wald medium basket
> -SRAM chain
> -Wheelset - Pacenti Brevet Rims 32h (front and rear), DT double butted 
> spokes, front hub is SP dynamo hub, rear hub is White Industries T11
> -Schwalbe lightweight tire tubes
> -Panaracer Pasela folding bead (65bx42)
> -Paul Component quick release skewers (pair)
> -Jagwire & shimano cabling and housing
>
> Pics of everything here:
>
> https://imgur.com/a/FvCHtmR 
> 
>


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/353e645b-42a4-4e17-ad83-959ec24df09f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread REC (Roberta)

PM Sent.  Also, please check spam folder.

On Tuesday, June 4, 2019 at 3:12:18 PM UTC-4, phil k wrote:
>
> Also my PBH is 79 last time i checked.
>
> On Tuesday, June 4, 2019 at 2:45:21 PM UTC-4, phil k wrote:
>>
>> Hi Roberta,
>>
>> Standover with 42mm Pasela is 31.5 to 31.75 inches. I wear 29 in seam 
>> jeans. With shoes, the top tube touches my pelvis with both feet flat on 
>> concrete. I'm 5ft 6", and have shorter arms and shorter legs.
>>
>> Dyno light would attach via mount on fork crown, which I would supply and 
>> put together before shipping.
>>
>> Hope that helps,
>>
>> Phil
>>
>> On Tuesday, June 4, 2019 at 12:23:07 PM UTC-4, REC (Roberta) wrote:
>>>
>>> Is the stand-over 81.5, like in the chart? (I don't know what tire size 
>>> Riv used to measure).  Without the lamp holder, how do you attach the 
>>> lamp?  Does one need to purchase a new lamp holder?
>>>
>>> Thanks.
>>>
>>> On Tuesday, June 4, 2019 at 8:58:18 AM UTC-4, phil k wrote:
>>>
 I was able to part out the rack/basket/nitto lamp holder. So price drop 
 to reflect - $1900 plus bike flights shipping.

 On Tuesday, May 28, 2019 at 6:08:16 PM UTC-4, phil k wrote:
>
> Lot of interest, but bike is still available. Price adjustment - 
> Complete bike minus Outershell basket bag, saddle, and pedals - $2075 
> plus 
> bike flights shipping.
>
> I'll put up more detailed pictures album when I can get the chance 
> today.
>
> Build includes:
>
> -MIT AHH frameset
> -Bottom bracket
> -Headset
> -Seatpost
> -Shimano Ultegra bar end shifters
> -Nitto Albatross heat-treated aluminum handlebars
> -Nitto Tallux stem
> -Gilles Berthoud leather bar wrap (can include leftover extra)
> -Shimano brake levers
> -Paul Component funky monkey front brake hanger
> -Nitto Reneherse rinko rear cable hanger
> -Paul Component Racer centermount brakes (pair)
> -Paul Component polished silver moon unit cable yokes (pair)
> -Riv Silver crankset wide low 38/24 170mm arms
> -B IQ-XS dyno front light
> -B toplight line small tail light
> -B bracket for saddle rail for tail light (allows taillight to be 
> attached to saddle rails)
> -Sheldon fender nuts (pair)
> -Nitto lamp bracket right side
> -XT Cassette 11-32 9 speed
> -XT rear derailleur 772 9 speed
> -Shimano front derailleur
> -Nitto Marks Rack with extended struts
> -Grey buckle strap to reinforce mark's rack to handlebars
> -Wald medium basket
> -SRAM chain
> -Wheelset - Pacenti Brevet Rims 32h (front and rear), DT double butted 
> spokes, front hub is SP dynamo hub, rear hub is White Industries T11
> -Schwalbe lightweight tire tubes
> -Panaracer Pasela folding bead (65bx42)
> -Paul Component quick release skewers (pair)
> -Jagwire & shimano cabling and housing
>
> Pics of everything here:
>
> https://imgur.com/a/FvCHtmR 
> 
>


-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/35dd8a08-33ec-45c0-9c03-aff16b5bc375%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: daily post ur riv

2019-06-04 Thread 'Bikie#4646' via RBW Owners Bunch

Hi Adam, 
I wanted to share my AHH, set up as my mixed-surface bike. (Lots of gravel 
roads west of Richmond, Va.) Yes, it has been modified for canti's, paint 
color (powder coat) and decals by Brad Click of Denver, from whom I 
purchased it in Jan., 2015. He did a great job! 
https://www.flickr.com/photos/bikecrazy-paul/46793762461/in/album-72157705950163554/
I use a Sam for my touring because it is stouter, but this one just feels 
so lively under me! I can bomb down steep and chunky gravel roads without a 
worry! 38 mm Vittoria Hyper Randooneurs for rubber. I added the older VO 
fenders I purchased ages ago when Virginia became the new Seattle! They 
keep the drivetrain cleaner!
Paul Germain,
Midlothian, Va.

On Friday, February 1, 2019 at 2:29:13 PM UTC-5, Adam Leibow wrote:
>
> hi all, i want to create a thread where you just post a picture of your 
> rivendell(s) whenever you feel like it. hope this is OK w/ the mods. i love 
> lookin at pics of em all day. i will start with my sam hillborne.
>
>
> [image: IMG_3920.jpeg]
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/0ca1c67e-f8f9-439e-bc75-5ce8c9c3e884%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Rivendell tandem builds

2019-06-04 Thread Shoji Takahashi

Hi Adam,
I have small HHH, and friction shift  (Shimano 9-speed bar-end shifter, 
Deore derailer, IIRC). I haven't had any problems with rear shifting. 
Stoker is usually one of my kids (<65 lbs), so there's not much frame flex.

My front shifter (Silver triple) occasionally is problematic for shifting 
to granny. (It might be a limit screw setting, but I'm not so keen on 
dropping the chain.)

Good luck!
shoji
Arlington MA


On Tuesday, June 4, 2019 at 4:05:41 PM UTC-4, Adam Leibow wrote:
>
> As a current Hubbuhubbuh owner, one piece of advice I can share is that 
> friction shifting was a PITA. My theory is the amount of distance the cable 
> travels combined with how much more a tandem frame flexes (longer tubing 
> distances + the weight of two people) equals mucho ghost shifting and 
> chain-jump weirdness. I could be wrong. But my problems went away when I 
> flipped the switch on my Ultegra shifters (mated to Paul thumbies) to 
> "index" mode. I'd steer clear of friction shifting on the tandem but I am 
> interested to hear others' experiences
>
>
>
> On Tuesday, February 14, 2017 at 2:13:18 PM UTC-8, Jim S. wrote:
>>
>> Hi all, 
>>
>> I was wondering if any prospective Rivendell tandem owners would be 
>> willing to share what they were thinking about for their builds. 
>>
>>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/3e6d9a5e-9e84-4c51-91cf-8c1252ee05dd%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Steve Palincsar

On 6/4/19 3:19 PM, Chad wrote:

I know Dave well and provided him with the Dura Ace 9-Spd BES (model SL-BS77)
and Deore XT RD-M771-SGS long cage and we've been talking about his setup. I
suggested he post here for more advice. This setup worked great for me on my
old Bombadil. I also used both SRAM and IRD 9-speed cassettes and the matching
M771 triple FD with Sugino XD2 triple and 110mm BB with this build I also
used those BES with the M772-SGS 9-spd RD and the M782 10-speed triple FD with
success on my Sam. Most of this stuff I got from RBW or sought their advice,
though they now incorrectly list the RD-M771 and RD-M772 as 10-speed when they
are in fact 9. I had my LBS originally set things up, though the mechanic was
used to experimenting with slightly unusual combinations. It was always my
understanding that most 9-speed and lower MTB and road components usually work
together. I believe Dave is also using a Claris double FD with Sugino XD-2
converted to a double with chainguard. Could this combo be causing an issue?

The reported problem is that the rear shifter doesn't reach across the
full span of the cassette, so he could be using a pointed stick to shift
the front derailleur and that wouldn't figure into this problem at all.

--
Steve Palincsar
Alexandria, Virginia
USA

--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/1b519049-d635-e16f-4cb7-ee5d3ea36ce1%40his.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Steve Palincsar

Inline adjusters work too.  And if you're using downtube shifter boss 
cable stops, they come with a cable adjuster as well.


On 6/4/19 3:26 PM, Chad wrote:

Oh, I forgot I did not use a barrel adjuster and everything worked fine, but 
both my mechanic and RBW pointed out that the M771 and M772 do not have built 
in barrel adjusters.  I told Dave he might try adding one at the RD to ease in 
indexing adjustment.  Maybe this is also causing a problem.  The indexing 
worked perfect when I used the BES and XT derailleurs. I wish I could help Dave 
more, but I struggle to get my own derailleurs adjusted perfectly.


--
Steve Palincsar
Alexandria, Virginia
USA

--
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/11a81fd4-8a39-44f6-3410-94fd32b530fa%40his.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Rivendell tandem builds

2019-06-04 Thread Adam Leibow

As a current Hubbuhubbuh owner, one piece of advice I can share is that 
friction shifting was a PITA. My theory is the amount of distance the cable 
travels combined with how much more a tandem frame flexes (longer tubing 
distances + the weight of two people) equals mucho ghost shifting and 
chain-jump weirdness. I could be wrong. But my problems went away when I 
flipped the switch on my Ultegra shifters (mated to Paul thumbies) to 
"index" mode. I'd steer clear of friction shifting on the tandem but I am 
interested to hear others' experiences

On Tuesday, February 14, 2017 at 2:13:18 PM UTC-8, Jim S. wrote:
>
> Hi all, 
>
> I was wondering if any prospective Rivendell tandem owners would be 
> willing to share what they were thinking about for their builds. 
>
>
>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/6bad80d1-23ca-430d-8f57-5550b7713d4d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] WTB: Bosco Moose

2019-06-04 Thread 'Abcyclehank' via RBW Owners Bunch

Send me a DM if still looking.  Think I have 2 of what you want. 

Ryan Hankinson
West Michigan
(616)928-4226

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/f6eedbd5-5b3a-471d-8c1e-c2f27732a0f8%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Chad

Oh, I forgot I did not use a barrel adjuster and everything worked fine, but 
both my mechanic and RBW pointed out that the M771 and M772 do not have built 
in barrel adjusters.  I told Dave he might try adding one at the RD to ease in 
indexing adjustment.  Maybe this is also causing a problem.  The indexing 
worked perfect when I used the BES and XT derailleurs. I wish I could help Dave 
more, but I struggle to get my own derailleurs adjusted perfectly.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/5b4fc2ec-0145-460e-9396-7b26828b9685%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] RD compatible with index shifters?

2019-06-04 Thread Chad

--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit
https://groups.google.com/d/msgid/rbw-owners-bunch/d07fdf20-2bff-4349-acbe-578f8ffe8096%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread phil k

Also my PBH is 79 last time i checked.

On Tuesday, June 4, 2019 at 2:45:21 PM UTC-4, phil k wrote:
>
> Hi Roberta,
>
> Standover with 42mm Pasela is 31.5 to 31.75 inches. I wear 29 in seam 
> jeans. With shoes, the top tube touches my pelvis with both feet flat on 
> concrete. I'm 5ft 6", and have shorter arms and shorter legs.
>
> Dyno light would attach via mount on fork crown, which I would supply and 
> put together before shipping.
>
> Hope that helps,
>
> Phil
>
> On Tuesday, June 4, 2019 at 12:23:07 PM UTC-4, REC (Roberta) wrote:
>>
>> Is the stand-over 81.5, like in the chart? (I don't know what tire size 
>> Riv used to measure).  Without the lamp holder, how do you attach the 
>> lamp?  Does one need to purchase a new lamp holder?
>>
>> Thanks.
>>
>> On Tuesday, June 4, 2019 at 8:58:18 AM UTC-4, phil k wrote:
>>
>>> I was able to part out the rack/basket/nitto lamp holder. So price drop 
>>> to reflect - $1900 plus bike flights shipping.
>>>
>>> On Tuesday, May 28, 2019 at 6:08:16 PM UTC-4, phil k wrote:

 Lot of interest, but bike is still available. Price adjustment - 
 Complete bike minus Outershell basket bag, saddle, and pedals - $2075 plus 
 bike flights shipping.

 I'll put up more detailed pictures album when I can get the chance 
 today.

 Build includes:

 -MIT AHH frameset
 -Bottom bracket
 -Headset
 -Seatpost
 -Shimano Ultegra bar end shifters
 -Nitto Albatross heat-treated aluminum handlebars
 -Nitto Tallux stem
 -Gilles Berthoud leather bar wrap (can include leftover extra)
 -Shimano brake levers
 -Paul Component funky monkey front brake hanger
 -Nitto Reneherse rinko rear cable hanger
 -Paul Component Racer centermount brakes (pair)
 -Paul Component polished silver moon unit cable yokes (pair)
 -Riv Silver crankset wide low 38/24 170mm arms
 -B IQ-XS dyno front light
 -B toplight line small tail light
 -B bracket for saddle rail for tail light (allows taillight to be 
 attached to saddle rails)
 -Sheldon fender nuts (pair)
 -Nitto lamp bracket right side
 -XT Cassette 11-32 9 speed
 -XT rear derailleur 772 9 speed
 -Shimano front derailleur
 -Nitto Marks Rack with extended struts
 -Grey buckle strap to reinforce mark's rack to handlebars
 -Wald medium basket
 -SRAM chain
 -Wheelset - Pacenti Brevet Rims 32h (front and rear), DT double butted 
 spokes, front hub is SP dynamo hub, rear hub is White Industries T11
 -Schwalbe lightweight tire tubes
 -Panaracer Pasela folding bead (65bx42)
 -Paul Component quick release skewers (pair)
 -Jagwire & shimano cabling and housing

 Pics of everything here:

 https://imgur.com/a/FvCHtmR 
 

>>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/a1df3ee4-6472-4cc9-9707-5370bfde6c5e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread phil k

Hi Roberta,

Standover with 42mm Pasela is 31.5 to 31.75 inches. I wear 29 in seam 
jeans. With shoes, the top tube touches my pelvis with both feet flat on 
concrete. I'm 5ft 6", and have shorter arms and shorter legs.

Dyno light would attach via mount on fork crown, which I would supply and 
put together before shipping.

Hope that helps,

Phil

On Tuesday, June 4, 2019 at 12:23:07 PM UTC-4, REC (Roberta) wrote:
>
> Is the stand-over 81.5, like in the chart? (I don't know what tire size 
> Riv used to measure).  Without the lamp holder, how do you attach the 
> lamp?  Does one need to purchase a new lamp holder?
>
> Thanks.
>
> On Tuesday, June 4, 2019 at 8:58:18 AM UTC-4, phil k wrote:
>
>> I was able to part out the rack/basket/nitto lamp holder. So price drop 
>> to reflect - $1900 plus bike flights shipping.
>>
>> On Tuesday, May 28, 2019 at 6:08:16 PM UTC-4, phil k wrote:
>>>
>>> Lot of interest, but bike is still available. Price adjustment - 
>>> Complete bike minus Outershell basket bag, saddle, and pedals - $2075 plus 
>>> bike flights shipping.
>>>
>>> I'll put up more detailed pictures album when I can get the chance today.
>>>
>>> Build includes:
>>>
>>> -MIT AHH frameset
>>> -Bottom bracket
>>> -Headset
>>> -Seatpost
>>> -Shimano Ultegra bar end shifters
>>> -Nitto Albatross heat-treated aluminum handlebars
>>> -Nitto Tallux stem
>>> -Gilles Berthoud leather bar wrap (can include leftover extra)
>>> -Shimano brake levers
>>> -Paul Component funky monkey front brake hanger
>>> -Nitto Reneherse rinko rear cable hanger
>>> -Paul Component Racer centermount brakes (pair)
>>> -Paul Component polished silver moon unit cable yokes (pair)
>>> -Riv Silver crankset wide low 38/24 170mm arms
>>> -B IQ-XS dyno front light
>>> -B toplight line small tail light
>>> -B bracket for saddle rail for tail light (allows taillight to be 
>>> attached to saddle rails)
>>> -Sheldon fender nuts (pair)
>>> -Nitto lamp bracket right side
>>> -XT Cassette 11-32 9 speed
>>> -XT rear derailleur 772 9 speed
>>> -Shimano front derailleur
>>> -Nitto Marks Rack with extended struts
>>> -Grey buckle strap to reinforce mark's rack to handlebars
>>> -Wald medium basket
>>> -SRAM chain
>>> -Wheelset - Pacenti Brevet Rims 32h (front and rear), DT double butted 
>>> spokes, front hub is SP dynamo hub, rear hub is White Industries T11
>>> -Schwalbe lightweight tire tubes
>>> -Panaracer Pasela folding bead (65bx42)
>>> -Paul Component quick release skewers (pair)
>>> -Jagwire & shimano cabling and housing
>>>
>>> Pics of everything here:
>>>
>>> https://imgur.com/a/FvCHtmR 
>>> 
>>>
>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/39766a1e-be55-43c9-9e6a-fcfb2a25a60b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] FS: New Tools

2019-06-04 Thread Keith Muller

Updated List:

Still Available 


Part# Description Retail My Price
BO-4 Park Tool, BO-4, Corkscrew Bottle Opener $45.95 $27.00
CC-3.2 Park Tool, CC-3.2, Chain wear indicator, Shows to either keep or 
replace $10.95 $6.00
DH-1 Park Tool, DH-1, Dummy hub $19.95 $11.00
DS-1 Park Tool, DS-1, Digital scale $69.95 $39.00
PW-4 Park Tool, PW-4, Professional pedal wrench $34.95 $19.00
TK-4T Park Tool, TK-4T, Tool Kaddie, Bench Mount $59.95 $37.00
TSB-4 Park Tool, TSB-4, Truing Stand Base For TS-4 $57.95 $32.00




Sale Pending 


CDG-2 Park Tool, CDG-2, Chainring diameter gauge $34.95 $19.00
CN-10 Park Tool, CN-10, Cable and housing cutter $36.95 $20.00
CP-1 Park Tool, CP-1, Cassette pliers $50.95 $28.00
CP-1 Park Tool, CP-1, Cassette pliers $50.95 $28.00


Keith

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/ffc9a968-f7ac-4739-9280-fa5bfc28f7cb%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread Joe Bernard

Roberta: For reference, I had a 54cm Roadini which fit me great in the saddle 
with pullback bars, but really no standover clearance to speak of for my 
80-81ish PBH. The size is measured at the seattube C-to-T, then you have to 
account for the toptube upsloping from there. 

I believe you're my height and I would need both of these frames in the next 
size down to run with dropbars. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/c3cb741e-33a1-43f7-92cc-26ab91e2f465%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread REC (Roberta)

Is the stand-over 81.5, like in the chart? (I don't know what tire size Riv 
used to measure).  Without the lamp holder, how do you attach the lamp?  
Does one need to purchase a new lamp holder?

Thanks.

On Tuesday, June 4, 2019 at 8:58:18 AM UTC-4, phil k wrote:

> I was able to part out the rack/basket/nitto lamp holder. So price drop to 
> reflect - $1900 plus bike flights shipping.
>
> On Tuesday, May 28, 2019 at 6:08:16 PM UTC-4, phil k wrote:
>>
>> Lot of interest, but bike is still available. Price adjustment - Complete 
>> bike minus Outershell basket bag, saddle, and pedals - $2075 plus bike 
>> flights shipping.
>>
>> I'll put up more detailed pictures album when I can get the chance today.
>>
>> Build includes:
>>
>> -MIT AHH frameset
>> -Bottom bracket
>> -Headset
>> -Seatpost
>> -Shimano Ultegra bar end shifters
>> -Nitto Albatross heat-treated aluminum handlebars
>> -Nitto Tallux stem
>> -Gilles Berthoud leather bar wrap (can include leftover extra)
>> -Shimano brake levers
>> -Paul Component funky monkey front brake hanger
>> -Nitto Reneherse rinko rear cable hanger
>> -Paul Component Racer centermount brakes (pair)
>> -Paul Component polished silver moon unit cable yokes (pair)
>> -Riv Silver crankset wide low 38/24 170mm arms
>> -B IQ-XS dyno front light
>> -B toplight line small tail light
>> -B bracket for saddle rail for tail light (allows taillight to be 
>> attached to saddle rails)
>> -Sheldon fender nuts (pair)
>> -Nitto lamp bracket right side
>> -XT Cassette 11-32 9 speed
>> -XT rear derailleur 772 9 speed
>> -Shimano front derailleur
>> -Nitto Marks Rack with extended struts
>> -Grey buckle strap to reinforce mark's rack to handlebars
>> -Wald medium basket
>> -SRAM chain
>> -Wheelset - Pacenti Brevet Rims 32h (front and rear), DT double butted 
>> spokes, front hub is SP dynamo hub, rear hub is White Industries T11
>> -Schwalbe lightweight tire tubes
>> -Panaracer Pasela folding bead (65bx42)
>> -Paul Component quick release skewers (pair)
>> -Jagwire & shimano cabling and housing
>>
>> Pics of everything here:
>>
>> https://imgur.com/a/FvCHtmR 
>> 
>>
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/078fca91-0e44-4ad7-95ad-223b4f2a60be%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: daily post ur riv

2019-06-04 Thread Jonathan K.

Tried a set of Albatross bars on my Appaloosa, then on my Sam. Wasn't crazy 
about them on either bike, but they sure look nice. 





-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/539eed4a-9de8-4505-af6c-c03c6cdf1c56%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: Coffee Grinder Question

2019-06-04 Thread Ginz

For home grinding where the consistency matters, like with a French Press, 
I use  a Zassenhaus mill.  For pour over with a filter, I usually let the 
small electric mill do the work quickly.  I don't see how heat build up is 
a huge issue but if I were in a laboratory environment with $30/lb beans, I 
wouldn't leave it to chance.  Mainly, the Zassenhaus mill is just 
satisfying to use as a tool, if you have the time to spare.


>>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/e5aae684-c454-4acc-a415-b608f2928dc6%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] WTB Struts for Nitto MT-Campee Rear Rack

2019-06-04 Thread Andrew Nussbaum

I picked this rack up at a bike swap without the struts.  Let me know if you 
have some I could buy. Thanks!

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/cf56622c-50a9-42cc-9343-5129f968fa7b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Joe Bernard

Going back over your original post, it sounds like it's indexing correctly, 
just not all the way across the cassette. I think your LBS mounted the bar-end 
in the wrong orientation and it's not clicking through all 9 steps. Everyone 
who's used these has made this mistake at least once. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/6477c648-9095-4fe1-8437-376e1dfd8d25%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] FS: New Tools

2019-06-04 Thread Keith Muller

Dan,  

Total will be $35 including shipping and PayPal fees.  My PayPal is 
ke...@cyclefix.bike

Keith

> On Jun 3, 2019, at 11:51 PM, Dan McNamara  wrote:
> 
> If still available I’ll take one of the CP-1 cassette pliers. 
> 
> My shipping zip code is 94901. 
> 
> Thanks
> 
> Dan
> 
>> On Jun 3, 2019, at 12:14 PM, Keith Muller  wrote:
>> 
>> Hey all,
>> 
>> I have a box of Park Tools that I'm looking to sell.  I got a big kit and 
>> there were some parts I already had.  All items are new.  Most in the 
>> packaging, some without.  Let me know what items you want.  You pay the 
>> shipping.  DM me with any questions or offers.
>> 
>> Keith
>> 
>> Pic:  https://drive.google.com/open?id=1gtQXrdR1wsSX3Vfd33YEnSP98uwNlIDA
>> 
>> This is what I have:
>> 
>> Part#Description Retail  My Price
>> AWS-1Park Tool, AWS-1, 3-way hex wrench, 4mm, 5mm and 6mm$11.49  
>> $6.00
>> AWS-1Park Tool, AWS-1, 3-way hex wrench, 4mm, 5mm and 6mm$11.49  
>> $6.00
>> AWS-15   Park Tool, AWS-15, 3-way aluminum body hex wrench, 4mm, 5mm and 
>> 6mm $31.95  $18.00
>> BBT-69.2 Park Tool, BBT-69.2, Bottom Bracket Tool, 44mm  $25.95  $14.00
>> BBT-9Park Tool, BBT-9, Bottom bracket tool, External cups and 
>> crankarm adjusting cap $22.95  $11.00
>> BCB-4.2  Park Tool, BCB-4.2, Bike cleaning brush set $21.95  $12.00
>> BO-2 Park Tool, BO-2, Bottle opener  $7.45   $4.00
>> BO-4 Park Tool, BO-4, Corkscrew Bottle Opener$45.95  $27.00
>> BT-2 Park Tool, BT-2, Fourth hand cable stretcher, With locking ratchet  
>> $48.95  $27.00
>> CC-2 Park Tool, CC-2, Chain wear indicator, Shows percentage of wear $27.95  
>> $16.00
>> CC-3.2   Park Tool, CC-3.2, Chain wear indicator, Shows to either keep 
>> or replace$10.95  $6.00
>> CCP-22   Park Tool, CCP-22, Crank puller, For square taper cranks
>> $15.49  $8.00
>> CCP-44   Park Tool, CCP-44, Crank puller, For splined cranks $15.95  
>> $9.00
>> CCW-5Park Tool, CCW-5, Crank bolt wrench: 14mm, 8mm  $11.95  $7.00
>> CDG-2Park Tool, CDG-2, Chainring diameter gauge  $34.95  $19.00
>> CL-1 Park Tool, CL-1, Synthetic chain lube, 4 oz. (118 mL)   $8.95   $5.00
>> CN-10Park Tool, CN-10, Cable and housing cutter  $36.95  $20.00
>> CN-10Park Tool, CN-10, Cable and housing cutter  $36.95  $20.00
>> CP-1 Park Tool, CP-1, Cassette pliers$50.95  $28.00
>> CP-1 Park Tool, CP-1, Cassette pliers$50.95  $28.00
>> CT-3.2   Park Tool, CT-3.2, Chain Tool, Fits 3/32'', 3/16'' and 1/8'' 
>> chains $36.95  $20.00
>> DAG-2.2  Park Tool, DAG-2.2, Derailleur hanger alignment gauge   $79.95  
>> $42.00
>> DH-1 Park Tool, DH-1, Dummy hub  $19.95  $11.00
>> DS-1 Park Tool, DS-1, Digital scale  $69.95  $39.00
>> INF-2Park Tool, INF-2 Tire inflator for air compressor   $134.95 
>> $80.00
>> MLP-1.2  Park Tool, MLP-1.2, Master link pliers  $15.95  $9.00
>> PTD-5Park Tool, PTD-5Preset torque driver, 5 Nm  $41.95  $24.00
>> PTD-6Park Tool, PTD-6Preset torque driver, 6 Nm  $41.95  $24.00
>> PW-4 Park Tool, PW-4, Professional pedal wrench  $34.95  $19.00
>> SA-3 Park Tool, SA-3, Deluxe shop apron  $24.95  $15.00
>> SW-22.2  Park Tool, SW-22.2, Master, Spoke wrench, Red, 0.136''  $25.95  
>> $15.00
>> SZR-1Park Tool, SZR-1, Shop scissors $9.95   $5.00
>> TK-4TPark Tool, TK-4T, Tool Kaddie, Bench Mount  $59.95  $37.00
>> TM-1 Park Tool, TM-1, Spoke tensiometer  $81.95  $44.00
>> TS-TAPark Tool, TS-TA, Thru axle adaptors, For all Park Tool truing 
>> stands   $59.95  $34.00
>> TSB-4Park Tool, TSB-4, Truing Stand Base For TS-4$57.95  $32.00
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "RBW Owners Bunch" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to rbw-owners-bunch+unsubscr...@googlegroups.com.
>> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
>> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/rbw-owners-bunch/ba5b9a3f-0286-44c1-b7a4-faef1962b050%40googlegroups.com.
>> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to a topic in the Google 
> Groups "RBW Owners Bunch" group.
> To unsubscribe from this topic, visit 
> https://groups.google.com/d/topic/rbw-owners-bunch/20sno8j5ces/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to 
> rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> To view this discussion on the web visit 
>

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Dave Redmon

Thank you for that clarification, Steve. I'll try again.

On Tue, Jun 4, 2019, 8:55 AM Steve Palincsar  Where is your LBS getting this stuff?  I am not aware of any Shimano 9
> speed bar end shifter that is not compatible with any Shimano 9 speed rear
> derailleur in index mode.  The incompatibilities between Shimano road
> shifters and MTB rear derailleurs don't come into play until you get to
> DynaSys 10 speed MTB.   If it's not working now either it's a set-up issue
> or the shifters are broken.  Maybe once you get this sorted you should find
> a better LBS.
> On 6/3/19 5:07 PM, Dave Redmon wrote:
>
> My goal is rear index shifting because I'm mostly deaf to improper shifting 
> in friction mode. My LBS tells me my Shimano 7700 9 speed index bar end 
> shifters are not compatible with my Shimano 9 speed XT rear derailer in index 
> mode. Has anyone else had this problem and found a solution?
>
> Dave in Kansas
>
>
> --
> Steve Palincsar
> Alexandria, Virginia
> USA
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "RBW Owners Bunch" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/rbw-owners-bunch/Nx-IWvyX4RI/unsubscribe
> .
> To unsubscribe from this group and all its topics, send an email to
> rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/rbw-owners-bunch/f475ab7e-303a-7399-69db-3d926e6f056d%40his.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/CAHuE3yac-CVFfu67B6mObWD%3DZan_%3DeORig6aC8q6DCodTu9bcA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Steve Palincsar

Where is your LBS getting this stuff?  I am not aware of any Shimano 9 
speed bar end shifter that is not compatible with any Shimano 9 speed 
rear derailleur in index mode.  The incompatibilities between Shimano 
road shifters and MTB rear derailleurs don't come into play until you 
get to DynaSys 10 speed MTB.   If it's not working now either it's a 
set-up issue or the shifters are broken.  Maybe once you get this sorted 
you should find a better LBS.


On 6/3/19 5:07 PM, Dave Redmon wrote:

My goal is rear index shifting because I'm mostly deaf to improper shifting in 
friction mode. My LBS tells me my Shimano 7700 9 speed index bar end shifters 
are not compatible with my Shimano 9 speed XT rear derailer in index mode. Has 
anyone else had this problem and found a solution?

Dave in Kansas


--
Steve Palincsar
Alexandria, Virginia
USA

--
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/f475ab7e-303a-7399-69db-3d926e6f056d%40his.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] WTB: Bosco Moose

2019-06-04 Thread Conway Bennett

I had one, I sold one, so naturally I want another.  I have stuff to trade if 
you're in need but will happily pay up.  Thanks in advance.

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/6f34dd18-266a-47e1-ada5-e311ecfa5692%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] RD compatible with index shifters?

2019-06-04 Thread Dave Redmon

Thanks for your observations. My BES are 7700s for 9 speed cassettes. My
chain and cassette (11-28t)  and the cables and housing are new Yokozunas.
I added a Jagwire RD barrel adjuster since it was missing.

On Mon, Jun 3, 2019, 11:21 PM Jeremy Till  That is definitely a M771 rear derailleur and is 9spd compatible:
>
> https://www.universalcycles.com/shopping/product_details.php?id=19237
>
> Like others, I have two bicycles which run the 7700-series bar ends with
> mountain derailleurs, so they are compatible. To work through the other
> possibilities:
>
> -Are you sure you have the 9 speed bar-end shifters? Shimano also has an 8
> spd version, and 8 speed cog spacing is different than 9 spd.
> -Are you sure you have a 9 speed cassette?
> -Probably highly unlikely, but is there any chance your cassette is a
> Campagnolo cassette? Campagnolo also uses a different cog spacing.
> -Are the shift cable and housing in good shape?
>
>
> On Monday, June 3, 2019 at 8:43:42 PM UTC-7, Dave Redmon wrote:
>>
>> Here's a photo of my Shimano XT RD
>>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "RBW Owners Bunch" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/rbw-owners-bunch/Nx-IWvyX4RI/unsubscribe
> .
> To unsubscribe from this group and all its topics, send an email to
> rbw-owners-bunch+unsubscr...@googlegroups.com.
> To post to this group, send email to rbw-owners-bunch@googlegroups.com.
> Visit this group at https://groups.google.com/group/rbw-owners-bunch.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/rbw-owners-bunch/b6335348-39e6-4ca8-b3c0-a0f5b2f86f2d%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/CAHuE3yY8mEStjV1t%2BCwhdyB%3DY96-zsmfBYNwe9Uq8nJUppxOFg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: New-to-me: 59cm Roadeo

2019-06-04 Thread Dave Grossman

I've been waiting for you to get a Roadeo so we can get a full write up and 
comparison with your old (now for sale) Roadini!

Enjoy and also FULLY APPROVE!

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/1c4278de-617d-4398-a320-acb5400591ca%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [RBW] Re: FS: 54.5 MIT AHH

2019-06-04 Thread phil k

I was able to part out the rack/basket/nitto lamp holder. So price drop to 
reflect - $1900 plus bike flights shipping.

On Tuesday, May 28, 2019 at 6:08:16 PM UTC-4, phil k wrote:
>
> Lot of interest, but bike is still available. Price adjustment - Complete 
> bike minus Outershell basket bag, saddle, and pedals - $2075 plus bike 
> flights shipping.
>
> I'll put up more detailed pictures album when I can get the chance today.
>
> Build includes:
>
> -MIT AHH frameset
> -Bottom bracket
> -Headset
> -Seatpost
> -Shimano Ultegra bar end shifters
> -Nitto Albatross heat-treated aluminum handlebars
> -Nitto Tallux stem
> -Gilles Berthoud leather bar wrap (can include leftover extra)
> -Shimano brake levers
> -Paul Component funky monkey front brake hanger
> -Nitto Reneherse rinko rear cable hanger
> -Paul Component Racer centermount brakes (pair)
> -Paul Component polished silver moon unit cable yokes (pair)
> -Riv Silver crankset wide low 38/24 170mm arms
> -B IQ-XS dyno front light
> -B toplight line small tail light
> -B bracket for saddle rail for tail light (allows taillight to be 
> attached to saddle rails)
> -Sheldon fender nuts (pair)
> -Nitto lamp bracket right side
> -XT Cassette 11-32 9 speed
> -XT rear derailleur 772 9 speed
> -Shimano front derailleur
> -Nitto Marks Rack with extended struts
> -Grey buckle strap to reinforce mark's rack to handlebars
> -Wald medium basket
> -SRAM chain
> -Wheelset - Pacenti Brevet Rims 32h (front and rear), DT double butted 
> spokes, front hub is SP dynamo hub, rear hub is White Industries T11
> -Schwalbe lightweight tire tubes
> -Panaracer Pasela folding bead (65bx42)
> -Paul Component quick release skewers (pair)
> -Jagwire & shimano cabling and housing
>
> Pics of everything here:
>
> https://imgur.com/a/FvCHtmR 
> 
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/85ec7315-8ee6-40e3-8a90-36ece44b6288%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] Re: New-to-me: 59cm Roadeo

2019-06-04 Thread Jock Dewey

Beautiful machine, Bill! Nice work.

Grant's designs all ride so so well, and these two, RAM & ROADEO, just rise 
like cream. Why, oh why, however, doesn't that true road bike, ROADEO, have 
bosses for DT shifters. A quirky Grantism I guess, they* all *seem to have 
one buried in there somewhere.

Jock Dewey / Athens, GA



On Monday, June 3, 2019 at 3:38:41 PM UTC-4, Bill Lindsay wrote:
>
> I haven't been active on the "Daily post Your Riv" thread, so this seemed 
> kind of out of place.  I've always been a 'roadie' first and foremost.  
> I've always had a bike in my stable that's a stripped down road bike.  The 
> slot in my stable has always existed, but there's been a bit of flux on 
> which bike fills that slot.  Regardless of the bike that fills my "road 
> bike" slot, in my heart the right bike to permanently occupy that slot is 
> the Roadeo.  For several years I've been filling that slot with placeholder 
> bikes that I consider functionally equivalent, but I've always been 
> confident that a 59cm Roadeo would be mine someday.
>
> Turns out a 59cm Roadeo cam available on I-Bob at a good price and I 
> jumped on it.  I had been so prepared to own a Roadeo that the build came 
> together from parts I already had in stock.  The only new part I bought to 
> do this build was the red Newbaums.  
>
> Frameset: 59cm Roadeo, Chris king red no-threadset
> Wheelset: White Industries, HED Belgium, Compass Stampede Pass EL
> Drivetrain: Rene Herse 42/26, White Industries Ti BB, Shimano SPD pedals, 
> Dura Ace 10sp RD, CX70 FD, Shimano Barcons, 11-28 cassette, SRAM1091 chain
> Components: generic carbon seatpost, Avocet O2 saddle, Soba Noodle bars, 
> Campy Xenon brakelevers ("gutted"), Shimano brakes, Cinelli Sesamo stem, 
> King Cage Ti
>
> PHOTO 
>
> I've only had it out on one short ride on it, but this build has been 
> ready in my head for so many years, that it was kind of like "of course 
> it's perfect".  I'm certain I could go do a century on it tomorrow
>
> Bill Lindsay
> El Cerrito, CA
>

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/aa052955-d29e-420f-8d0c-7305aa3b5a52%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] New-to-me: 59cm Roadeo

2019-06-04 Thread Fullylugged

Approve

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/a2697ab9-1f76-4e69-ad1a-f0aa790919be%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[RBW] RD compatible with index shifters?

2019-06-04 Thread Joe Bernard

Jeremy's right, I've had a couple of those connected to various 9-speed Shimano 
shifters including bar-cons. Either the shifter is 8-speed (click through it to 
count 'em), or the cable is mounted on the wrong side of the fixing bolt at the 
derailer. Or the inner wire is hanging up in the housing. 

-- 
You received this message because you are subscribed to the Google Groups "RBW 
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to rbw-owners-bunch+unsubscr...@googlegroups.com.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
Visit this group at https://groups.google.com/group/rbw-owners-bunch.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/rbw-owners-bunch/ae548535-fb9c-48d5-a453-173feea83d8e%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

37 matches

Mail list logo