There are a couple of smart panel options available like Lumin and SPAN but may
be more involved than what you are looking for -GlennSent from my 'smart'phone,
so please excuse typos and spelling errors.-- Original message--From:
Mac Lewis via RE-wrenchesDate: Tue, Jun 27, 2023 1:06
Hello Wrenches,
Is anyone aware of a remote load shedding solution that doesn't require
additional signal wiring to the loads?
Generac has a great solution for this that they adapted from their
generator business called a Generac Smart management module. Its a 2P x
50A relay that monitors line
Hi Jay, Larry says is correct. My experience, with cells and there BMS is
they need to get up to top balance voltage then the BMS will stop charging
the full cells and bring the remainder of cells up to fill charge. My
oldest set is about 6 years old, since I understood they have been fine
On
Hi Jay,
For our LFMP and LFP batteries, it has never mattered.
As long as current is flowing, the SoC is increasing and the voltage will rise
until it reaches the CV set point.
Typically cell balance occurs when a cell voltage reaches a set point where a
load turns on across that cell.
Hi All
I’m wondering if minimum charge amps for lithium is common or not?
Or does it have to do with the cell shape: cylindrical vs prismatic vs pouch?
A client purchased some EG4 batteries and they are getting a bit out of
balanced. Tech support didn’t suggest higher volts or longer absorb
5 matches
Mail list logo
