GE Test set for MastrII/ExecII $100 firm
GE MastrII 100 watt mobile,42-50,no accys. $55
GE EC Icoms,some are PLL
new DAD board $45
several used TS-64's
reply DIRECT to n3appatneo.rr.com
Yahoo! Groups Links
* To visit your group on the web, go to:
is anyone who has a schematic diagram or software of gp308
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
* Your use of Yahoo! Groups is subject
On Wed, 17 Aug 2005 20:52:53 -0400, Joe C wrote:
The radio itself is just an enclosed box with
connectors.
Hi Joe:
I now know the one you're talking about. I have no leads
on the manual for itsorry.
Tedd Doda, VE3TJD
Lazer Audio and Electronics
Baden, Ontario, Canada
Yahoo!
vintageaudio2004 [EMAIL PROTECTED] wrote:
The above is a bpbr duplexer, not a pre-selector. You
No, the TPCP-1546C is a preselector, take a look:
http://www.telewave.com/pdf/TWDS-2006.pdf
I think you are confused with the TPRD-1546C which is
indeed a duplexer.
Actually what pops up is
One thing you'll find is how any cable type you use
will show slight differences if your test equipment
will indicate small changes.
Some of you guys walk right past a cheap resource. At
Dayton and the local Ham Flea Markets, there are/were a
number of people Selling new jumpers, which are
Good day All
I am still looking for a 4 channel voting circuit to
place voting on my UHF linked system.
The two channel on Repeater Builders page will not
suffice.
Regards
Bradley Glen ZS5WT
http://members.harc.org.za/zs5wt
__
Do You
bradley glen wrote:
Good day All
I am still looking for a 4 channel voting circuit to
place voting on my UHF linked system.
The two channel on Repeater Builders page will not
suffice.
Regards
Bradley Glen ZS5WT
http://members.harc.org.za/zs5wt
Best bet:
Hi All
Telephone company demarks have the old carbon style lightning
arresters. Any success repairing them? I know the new ones have a
gas discharge design. The element has a couple of crimps that hold
the carbon from falling out and the gap is insured by a plastic or
ceramic holder. I
Does anyone know where I can find part numbers (such as Digikey) for
the pins contacts that fit into the connectors for:
- Headers in GE Mastr Exec and Mastr II's
- Headers on the RC-100 and RC-1000 controllers
- Plugs that fit into the back of Motorola GM-300's and 1225 16 pin
connector
Gran Clark wrote:
Hi All
Telephone company demarks have the old carbon style lightning
arresters. Any success repairing them? I know the new ones have a
gas discharge design. The element has a couple of crimps that hold
the carbon from falling out and the gap is insured by a plastic or
There is actually one of tose on eBay right now.
http://cgi.ebay.com/Doug-Hall-4RV-2-Signal-to-Noise-Radio-Voter_W0QQitemZ753
8605980QQcategoryZ46539QQrdZ1QQcmdZViewItem
Jamey Wright
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Jim B.
There may be a gas discharge replacement for the unit that you have, but they
might be difficult to find. I tossed the ones I had years ago. Your best bet
is to change out the entire mounting to a newer design, scraping the carbons
may have changed the spark gap.
73, Joe, K1ike
Ex Bell
Anyone should contact the power company if you are not a electrician,
have them pull the meter socket . do that first if the seal is broken
you will have a big problem explaining that.
also I took a class back in 1984 that Meter Socket after you get an
approval ( unless they have someone to
Headers on Mastr II's are 0.156 spaced Molex, standard parts available from
Digikey, Mouser, et al.
Never had an RC-100x so can't help there.
GM300's and the like I've always bought connectors from Mo', but Batlabs
says they're Amp parts:
Connector, with locking tab 16 pin, 104422-1-ND (AMP
Dont bother,upgrade to gas discharge,far better protection and from this
century too!
Gran Clark wrote:
Hi All
Telephone company demarks have the old carbon style lightning
arresters. Any success repairing them? I know the new ones have a
gas discharge design. The element has a couple of
I have a Decibel UHF duplexer, but the model number on the ident tag has
been scratched through, so Im not sure which model I have. It is a
four-cavity animal, and is currently tuned to 462.000 / 467.000. The
information from the tag is as follows:
Model: 532-40xx-004
Of course, the
16 matches
Mail list logo