Chris,
I have a copy in Adobe Acrobat (.pdf) format. The pages are not 100% in
sequence but at least it is a manual. Email me direct at dzastrow (at)
qwest (dot) net if you would like a copy.
Doug
- Original Message -
From: Chris Curtis demo...@rollanet.org
To:
Doug Zastrow wrote:
Has the IFR page on the rb website been taken off?
No, it has been revamped recently. Mike will likely reply with the link
to the new index when it's ready.
Kevin
Chuck Kelsey wrote:
The digital horror stories don't seem to be vendor-related either -- plenty
of bad press on both Motorola and Tyco (MA-Com - was GE once upon a time).
My state is a good example of a digital horror story. $3 billion statewide
contract with Tyco cancelled for a system
- Original Message -
From: wd8chl
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, April 07, 2009 10:12 AM
Subject: Re: [Repeater-Builder] (OT) APCO P25 horror stories anyone?
And M/A-Com is suing the state because they DID meet the original
specs/requirements, and the state is
Gary Glaenzer wrote:
- Original Message -
From: wd8chl
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, April 07, 2009 10:12 AM
Subject: Re: [Repeater-Builder] (OT) APCO P25 horror stories anyone?
And M/A-Com is suing the state because they DID meet the original
No,
Probly Big M found an out for them to cancel the M/A Com deal and upped the
kickback amount to the right person so they would buy from them instead.
Mike
- Original Message -
From: wd8chl
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, April 07, 2009 10:43 AM
Patrick,
I believe I should have a manual in my stash, from a 40-10 long ago obliterated
by lightning. If so, you can have it for shipping costs. I will check this
evening.
John Maurer WØDP
- Original Message -
From: Patrick Patterson
To: Repeater-Builder@yahoogroups.com
Have you read the engineering reports?
I used one of the radios and wasn't very impressed (actually I was quite
disappointed). And I was a cheerleader for the system up until then.
Chuck
And M/A-Com is suing the state because they DID meet the original
specs/requirements, and the state is
Good Morning
Since we have no Kenwood dealers in our area I was
wondering if anyone has the programming software and required cables and
documentation for the above mentioned Kenwood handheld for sale or know
where I could acquire such a copy
thanks
Ed Flipsen
I need to tune the VCO for my amateur frequency in the TKR-750. Does this
unit need to be hooked to the computer and set in some way before tuning? I
am at the very low end of what the repeater will program to at 147.060 and I
can't get the right voltage on the Test Point by tuning the capacitor.
Only if it bears the Rod Blagojevich Seal of Approval (AKA: campaign
donation)
;-p
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Gary Glaenzer
must be Illinois...
- Original Message -
From: wd8chl
And M/A-Com is suing the state
What is the difference between LDF5-50 and LDF5-50A? I ran accros some used
non-A type 7/8 and was wandering what the difference was if any.
Thanks!
De. N5NPO
At 10:18 AM 4/7/2009, Randy Brumback wrote:
I need to tune the VCO for my amateur frequency in the TKR-750. Does
this unit need to be hooked to the computer and set in some way
before tuning? I am at the very low end of what the repeater will
program to at 147.060 and I can't get the right
Are you tuning the TX or the RX VCO? The K and the K2 overlap coverage from 146
to 150mhz. From what I understand the RX pre-select really determines freq
coverage on those models.
- Original Message -
From: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
To:
Hi Ed,
If no one has already answered you... you're welcome to Email
and/or call me. I'm an Authorized Kenwood Dealer and Service
Station. Email probably gets the fastest response while I'm
out in the field.
cheers,
skipp
skipp...@yahoo.com
www.radiowrench.com
Ed Flipsen edw...@...
Kenwood_rss has the software that you need.
Peter
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of skipp025
Sent: Tuesday, April 07, 2009 2:59 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re:
Attempting to program a VXR-7000 using CE-27 (using factory cables software).
No problems in the past. This time around, gives a read error invalid data
receive. Also, flashes CL and ON repeatedly, along with CLN on the ANI
display...can't remember if this occured last time or not. Any
Make sure you're on the right com port.
Attempting to program a VXR-7000 using CE-27 (using factory cables
software). No problems in the past. This time around, gives a read error
invalid data receive. Also, flashes CL and ON repeatedly, along with
CLN on the ANI display...can't remember if
:) Software and cable both reflect COM1...I think I remember having to tweak
with the driver settings but not sure. Could not find this anywhere in the
service manual, any thoughts on what they should be? Baud rate, flow, parity,
etc.
--- In Repeater-Builder@yahoogroups.com, Bill Hudson
Thanks to all the replies.
I've got the pdf files I was looking for.
Chris
Kb0wlf
-Original Message-
From: Repeater-Builder@yahoogroups.com [mailto:Repeater-
buil...@yahoogroups.com] On Behalf Of Doug Zastrow
Sent: Tuesday, April 07, 2009 6:39 AM
To: Repeater-Builder@yahoogroups.com
Try writing a default file to the repeater. Test then program your data. Make
sure it is the correct one for the band. If you by accident write a vhf file to
a uhf model you will have a door stop and will have to go back to
Vertex.
Sent from my Verizon Wireless BlackBerry
-Original
It only says K-1. Goes from 146.000 to 174.000 or something near that. I am
confused at what the manual calls firmware. Is that like bios in a computer or
does it also take in programming the channels. Also the manual talks about
holding PF1 while turning on the repeater to put it in
Sounds like you have a K-1 alright.
Firmware is kinda like BIOS.
Holding dowd PF-1 while powering up puts it into FIRMWARE program mode. The
number of decimals or periods showing on the display tell you what baud rate to
program the firmware in at. Now, do you have a version 1 or 2 radio? What
23 matches
Mail list logo