Hi Skipp,
Thanks for the offer of help. I'll take a pic and send it to your yahoo mail
later today.
-- In Repeater-Builder@yahoogroups.com, skipp025 skipp...@... wrote:
Hi Steve,
Not knowing model numbers for Repco gear I will say I have
a number of Repco Manuals scanned into pdf.
The first limiter is available on a GE Mastr II on the test socket, and can be
used for signal strength after a signal is well above the noise. Lots of
signals can be copied full quieting before the first limiter starts to show a
reading.
On the P S controller, you have to hook up to the
TKR 720 /820 and 620 have the similar display board as per documents.
Radio shack listed the required part-uPD 75104GF J99, but its for the TKB 720
will it work?
Anyway I am asking my friend to get me one and will try the luck.
I am on the look out on all the suggested roads!
Tnx for the
I have a High Stability MSF5000 repeater. This is the most popular
UHF split with the high stability oscillator. This unit is currently on
463 MHz (4 channel programmed in I believe). Recently tested and
checked ... does not have the VCO problems that some others have
exhibited. Looking
MSR-2000 is 100watt UHF can be retuned to the ham bands. Comes with duplexers.
Decibel products 8Bay dipole with mast also have 8 more dipoles without mast
will include you could sell or use for back up. All for new low price$600 Its
on 461.075,466.075
Taking offers will not break up. Some want
--- In Repeater-Builder@yahoogroups.com, w4sef w4...@... wrote:
Does your Mastr II have the wiring harness for the Mastr II encode board that
is adjacent to the exciter. iF so I had the same issue with the P S
controller. After some time I found the solution. Let me know. JM
Hi all,
I am
Well, everyone, I have finally figured this out. and it turned out NOT to be
anything anyone had suggested.
After trying two other PA assemblies and seeing no improvement in receive
sensitivity, I decided to try a different RX filter hybrid. When I removed
the one in the radio, I noted that
At 08:39 AM 05/11/09, you wrote:
MSR-2000 is 100watt UHF can be retuned to the ham bands. Comes with duplexers.
Decibel products 8Bay dipole with mast also have 8 more dipoles
without mast will include you could sell or use for back up. All for
new low price$600 Its on 461.075,466.075
Taking
I would like to add my 2 cents on the powerpoles.
Our club has a number of systems on mountian tops. Our history with powerpoles
is that unless you mechanically lock both side together, they have a tendancy
to back out and open circuit due to temperature change. I'm talking about the
whole
--- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ wa6...@... wrote:
At 08:39 AM 05/11/09, you wrote:
MSR-2000 is 100watt UHF can be retuned to the ham bands. Comes with
duplexers.
Decibel products 8Bay dipole with mast also have 8 more dipoles
without mast will include you could
I am in need of service and operating manuals for the R-2001A Communications
System Analyzer. Can you please advise as to how I might obtain these
publications? Thank you!
---Jim.
Why are you banning me from joining the coordination group? (Banned by Owner).
Let it go.
--- In Repeater-Builder@yahoogroups.com, Spencer R. Peterson easypro...@...
wrote:
Why are you banning me from joining the coordination group? (Banned by Owner).
13 matches
Mail list logo
