[Repeater-Builder] Selectone ST-104 Help

Hi All. First of all I have downloaded the pdf for this CTCSS unit, but I am having probelms getting it to work, to give a I/O line for the Repeater controller sense . I have got it fitted in my receiver, and one inthe transmitter. When checking the RX, I can not get a trigger to indicate that

[Repeater-Builder] CTCSS Information Required.

Hi All, I have what I believe to be a Tait CTCSS unit. The numbers on the baord are 225-00011-41B. I know it is a 2 channel CTCSS unit, as it has two pots on it. I can work out which wires are the +12v and ground, but I do nmot have any information on what the other 10 connections points are.

Re: [Repeater-Builder] CTCSS Information Required.

. Thank you. - Original Message - From: Gmail - Home To: Repeater-Builder@yahoogroups.com Sent: Saturday, May 10, 2008 7:00 PM Subject: [Repeater-Builder] CTCSS Information Required. Hi All, I have what I believe to be a Tait CTCSS unit. The numbers

[Repeater-Builder] HELP - 3x Mitreks will Not Tune up for Repeater RX on 10mtrs.

Hi All, I am now in need a some big HELP. I have been trying to get our groups 10mtr repeater up and running, and it seems to want to block me at each point. I am very grateful for the help that has been given so far, and this has got us to the point where we have 50% of the repeater running.

[Repeater-Builder] Signal Circuit Wanted - If Possible.

Hi All, I have a radio that does not have any point for taping a line for a signal report from it to the controller. Radios in question, Mitrek and Tait. Controller is RLC-3 and RLC-2A So I am after a circuit if possible that will allow me to get a signal report from the incoming contact. I

Re: [Repeater-Builder] Signal Circuit Wanted - If Possible.

, KA3HSW / WQGJ413 -Original Message- From: Gmail - Home [EMAIL PROTECTED] Sent: Jan 14, 2008 12:16 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Signal Circuit Wanted - If Possible. Hi All, I have a radio that does not have any point for taping a line

Re: [Repeater-Builder] GM300 - 433MHz?

The answer is YES but you need to do a few things to get it there. Best would be to check out the information on www.batlabs.com and click on the GM300 link. You need of course the Motorola programming software and interface, and when you want to program a new frequency, in your case 433Mhz,

[Repeater-Builder] Motorola Mitrek Power Question.

Hi All, Just a quick question to confirm before proceeding to finish. I have a low band Mitrek on 10mtrs. I am using 2 radios, one for RX and one for TX. The TX is working fine, and now I am just fixing a couple of issues on the RX. I note in the manual and Mike's information the wiring for

Re: [Repeater-Builder] Motorola Mitrek Power Question.

-Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Gmail - Home Sent: Friday, January 11, 2008 6:02 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Motorola Mitrek Power Question. Hi All, Just a quick question to confirm

[Repeater-Builder] RLC-Mot and Optocoupler for COR - Not Working Correctly.

Hi All, Hope you had a good Christmas, and looking forward to the New Year. Anyway my question. I have a RLC-MOT installed in my Mitrek 10mtr RX, and have also fitted a optocouple to isolate the radio from the controller (RLC-2A) I have used the circuit from the Mitrek pages in