You could try using one of these. It worked for me.
http://www.arcomcontrollers.com/rc210/rad.html
Randy
WB0VHB
--- In Repeater-Builder@yahoogroups.com, "kc7stw" wrote:
>
> Hello again.
>
> I have a UHF MSR2000 up and running now. Most of my radios have the reverse
Model T99VB+007W
ID T73VBJ7204BK
VHF 100 watt radio. No cables, trunk mounted transceiver only.
You pay shipping. Shipping weight will be 25 pounds.
You can also find out more information about how Mototrbo is being used by
amateur radio operators at this link.
trbo.info
We currently have 10 Mototrbo repeater connected via IP coast to coast and
border to border.
Randy
WB0VHB
--- In Repeater-Builder@yahoogroups.com, "Eric Lemmon&qu
Be careful you don't turn the transmit SM50 into a puddle. It is not designed
for repeater operation.
--- In Repeater-Builder@yahoogroups.com, "plaimann" wrote:
>
> i have a zetron 48b controller , running 2 motorola vhf sm50 mobiles via
> the acdcessory connectors.
> im having a problem
Sorry I don't have one but wanted to give you a heads up if you do.
Not all Model 19s are built the same. I recently found this out when I
recently obtained one for a 2-tone store and forward installation.
The unit I got was not intended to accept the detected the logic from an
outboard 2-tone
Model T99VB+007W
Removed from working service.
Transceiver body only, no cables.
Best offer plus shipping.
Please reply direct.
>From my experience, the Model 38 and 48 will not do reverse burst.
I did however use a Arcomm audio delay board and accomplished the same results.
http://www.arcomcontrollers.com/rc210/rad.html
Then I decided I want a repeater controller capable of additional ports and
dropped the Model 48 I w
Looking for a Zetron model 19 or similar 2-tone store and forward device from
another manufacture.
I have the UHF version and would like to know if it will program below 450 MHz?
If so, I would be happy to pay someone to program it for me.
.
Mobile and portable digital coverage appears to be better than my analog
repeater that was removed from the same repeater antenna.
If you have a Mototrbo repeater and would like to learn more about linking it
to us, please contact me.
Randy
WB0VHB
Iowa.
Randy
WB0VHB
> As a side note;
> There are two more Amateur TRBO repeaters currently being configured
> for IP Site Connect here in Southern California. I was also informed
> yesterday, yet another one is in the works for a high level Mt. top
> site which sounds like it
I know this a long shotbut looking for a transmit and receive channel
element pair on a UHF simplex frequency for a link. Something in the 446-447
MHz range or similar.
Randy
WB0VHB
ar in taxes is
too much for me to pay.
Randy
WB0VHB
--- In Repeater-Builder@yahoogroups.com, Gran Clark wrote:
>
> Randy
>
> How much is the site owner asking to cover one cable for a years
> tax? Just to put this discussion in perspective.
>
> Gran K6RIF
>
>
&g
Anyone know if the UHF version will do 444 MHz?
Is the programming software and programming cable available or can someone
program this unit?
Randy
noise in the series of mobiles.
Most of the time, reseating the RF and logic boards on the
interconnecting pin header and tightening PC board screws and RF
shields will eliminate this.
Randy
WB0VHB
--- In Repeater-Builder@yahoogroups.com, Peter Summerhawk
wrote:
>
> Well I already c
nther transposed set of PL
tones to bring the repeater using the remote base into the Echolink
QSO. Not too many ham repeater panels have this kind of flexibility.
Both types panels have their place but to say one or the other doesn't
fit the other application is not correct.
Randy
WB0VHB
---
DCFluX,
That worked!
I lifted one side of R188 instead of going to the IC.
CWID, courtesy beep and status tones are back and no more squelch
tails with delayed audio.
I'm not using the telephone patch anyway but Zetron did offer an audio
delay for that feature.
Randy
WB0VHB
--- In Rep
I don't think his WiFi unit is used to transmit to other laptops and
computers in his house.
Rather this is a client or bridge unit used to feed his home computer
with internet from a distant access point.
Randy
WB0VHB
--- In Repeater-Builder@yahoogroups.com, "G Shaw" &l
I had a similar problem with a Motorola Canopy subscriber unit.
Changed the ethernet port speed from 100 Base T to 10 Base T and the
problem went away.
You will need to have your ISP change this unless you know how to
access the unit.
Let me know if this helps.
Randy
WB0VHB
--- In Repeater
Looking for someone who has successfully interfaced a repeater
controller to a VHF PURC5000 with an Advanced Control.
I'm attempting to use a Zetron Model 48B to encode PL tones.
Need to know where to inject transmit audio and PL encode tones as
well as PTT.
Randy
WB0VHB
No it's not a tone from the wx bureau. This tone is generated by the
test unit.
Randy
--- In Repeater-Builder@yahoogroups.com, Pat Patterson <[EMAIL PROTECTED]>
wrote:
>
> FYI the 1k test tonew you hear is actully a 1050hz
> test tone that activates older recievers.
>
> responsibility.
>
> 73, ron, n9ee/r
>
>
> Ron Wright, N9EE
>
> 727-376-6575
>
> MICRO COMPUTER CONCEPTS
>
> Owner 146.64 repeater Tampa Bay, FL
>
> No tone, all are welcome.
>
>
>
>
> On Sun, Jun 1, 2008 at 10:03 AM, wb0vhb wrote:
&g
It was made by MTS. However after checking their web site, all I find
is the weather radio and not the test unit.
Randy
--- In Repeater-Builder@yahoogroups.com, "Jim Cicirello" <[EMAIL PROTECTED]>
wrote:
>
> Hi Randy,
> Do you know who makes the SAME Test Unit and the approximate cost?
This is
We use a receiver that is programmable for up to 4 counties and
individual selection of the EAS event(s).
Randy
--- In Repeater-Builder@yahoogroups.com, Joe <[EMAIL PROTECTED]> wrote:
>
> How do you block the weekly test from going off?
>
> Joe
>
> wb0vhb wrot
I have a unit that has four push buttons. Each button is PC
programmable to transmit any kind of event on any of the WX channels
you program it to. It can be programmed for any SAME code.
In place of the normal voice announcement, a 1K tone is played for
about 10 seconds before the deactive code
I have a digital MSF5000 that normally works OK. From time to time it
stops working and L06 is displayed.
Resetting the station brings it back to operation.
My service manual does not list error code L06. Does anyone know what
it means?
Randy
WB0VHB
Doesn't hurt to ask, so before I get one of mine re-xtaled, does
anyone have one collecting dust?
Randy
WB0VHB
I am using this rack mounted receiver on battery power instead of 120AC.
Can someone direct me to a schematic of where to kill the battery
alert beep?
I will be using disc. audio but want to monitor squelch gated audio
without the beeping.
Randy
WB0VHB
A friend of mine has a MSF5000 with a deaf receiver.
Instead of bring the entire 175lb station 150 miles to me, is there an
easy way for him to remove the receiver from the station?
If so, can just the receiver and controller be powered from my 13.8VDC
bench supply.
Randy
WB0VHB
Anyone with any experience turning a VHF PURC 5000 into a repeater?
Randy
Looking for a used cheap and simple controller with just COR,
hang-timer and time out timer. CWID not needed.
Randy
31 matches
Mail list logo
