is it possible to actually read 1662 volts AC on a 600 volt digital
meter by putting ground lead of meter on chassis , and the red
one on pin 1 then pin 9 in the ET-60 TX strip , this doesnt seem
possible to me bit i double checked my house current and it read
117
is it possible to actually read 1662 volts AC on a 600 volt digital
meter by putting ground lead of meter on chassis , and the red
one on pin 1 then pin 9 in the ET-60 TX strip , this doesnt seem
possible to me bit i double checked my house current and it
I suspect there was about 600 VAC 60 Hz., and a healthy dose of RF on top
of the 60 Hz.
Ssb
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
*
Isn't it supposed to be on DC???
- Original Message -
From: Ralph Mowery [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 15, 2004 9:53 PM
Subject: Re: [Repeater-Builder] Voltage in an Mpro Ge deskmate
is it possible to actually read 1662 volts AC
4 matches
Mail list logo