On Mar 16, 2009, at 9:53 PM, Rick Szajkowski wrote:
Thanks Nate .. :P yes I looked inside .. there was water damage to
the box's when I got the ends with the coax ..
I will double check to see if I have any luck
Ah, bummer. Well, send on over the actual connector numbers as Jeff
Hello to the group ... I need to run some new 7/8 hard line and some 1/2
inch
Question is there any info on installing the ends on both I did a google
search and not luck
any help would be great and also any special tools ?
Thanks in advance ..
Rick
Subject: [Repeater-Builder] Andrews hard line help
Hello to the group ... I need to run some new 7/8 hard line and some 1/2 inch
Question is there any info on installing the ends on both I did a google
search and not luck
any help would be great and also any special tools ?
Thanks
be all set when you get them. No special tools required.
Chuck
WB2EDV
- Original Message -
*From:* Rick Szajkowski va3r...@gmail.com
*To:* Repeater-Builder@yahoogroups.com
*Sent:* Monday, March 16, 2009 3:11 PM
*Subject:* [Repeater-Builder] Andrews hard line help
Hello to the group
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Rick Szajkowski
Sent: Monday, March 16, 2009 1:25 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Andrews hard line help
no new ends :( all NOS) but no distructions ... so any and all help .
I will go look at the ends
] Andrews hard line help
no new ends :( all NOS) but no distructions ... so any and all help .
I will go look at the ends and see if I can read part #'s
On Mon, Mar 16, 2009 at 3:14 PM, Chuck Kelsey wb2...@roadrunner.com wrote:
There is an instruction sheet that comes with the new
: [Repeater-Builder] Andrews hard line help
no new ends :( all NOS) but no distructions ... so any and all help .
I will go look at the ends and see if I can read part #'s
On Mon, Mar 16, 2009 at 3:14 PM, Chuck Kelsey wb2...@roadrunner.com wrote:
There is an instruction sheet
Rick,
I have a pdf of installation instructions for the ring flare type
connector. Let me know if you need.
Collin
-Original Message-
From: Rick Szajkowski va3r...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Mon, 16 Mar 2009 3:11 pm
Subject: [Repeater-Builder] Andrews hard line
Hello to the group ... I need to run some new 7/8 hard line
and some 1/2 inch
Question is there any info on installing the ends on both I
did a google search and not luck
any help would be great and also any special tools ?
It's easier if you have Andrew's tools (or whoever's), but
Szajkowski
*Sent:* Monday, March 16, 2009 1:25 PM
*To:* Repeater-Builder@yahoogroups.com
*Subject:* Re: [Repeater-Builder] Andrews hard line help
no new ends :( all NOS) but no distructions ... so any and all help .
I will go look at the ends and see if I can read part #'s
On Mon, Mar
10 matches
Mail list logo