I found this thread quite interesting...I didn't know the GLB existed
till now. It sounds like a fun thing to tinker with. Have to keep my
eyes open.
But I've had this concept in my brain for a while, and I wonder what
you all might think. Bear in mind its a concept.
Seems that the next
Mike Morris wrote:
At 06:09 AM 2/17/06, you wrote:
I suppose I should brave the cold and go out to the garage and dig out
the GLB 300 I have...it was set up for an MHT series Motrac. I ran it
for years on a Motran. I don't remember if the I.F. in the H series rx
was the same...8Mhz...
I
I suppose I should brave the cold and go out to the garage and dig out
the GLB 300 I have...it was set up for an MHT series Motrac. I ran it
for years on a Motran. I don't remember if the I.F. in the H series rx
was the same...8Mhz...
I think I have the book too...
--
Jim Barbour
WD8CHL
Thanks Mike. That helps.
Ron
- Original Message -
From: Mike Morris [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, February 17, 2006 4:15 PM
Subject: Re: [Repeater-Builder] GLB Synthesizer
At 06:09 AM 2/17/06, you wrote:
I suppose I should brave the cold and go
Folks,
I wonder if anyone out there has any information on
the offset crystal needed for a GLB synthesizer. I am trying to interface
an old GLB to my old Motorola Motrac (U63HHT). Its an old
boatanchor. Trying to replicate my early days on 2 meters when I ran this
setup. But I have lost
Johnson
Sent: Thursday, February 16, 2006
1:41 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] GLB
Synthesizer
Folks,
I wonder if anyone out there has any information on the
offset crystal needed for a GLB synthesizer. I am trying to interface an
old GLB to my old
, 2006 3:41
PM
Subject: [Repeater-Builder] GLB
Synthesizer
Folks,
I wonder if anyone out there has any information
on the offset crystal needed for a GLB synthesizer. I am trying to
interface an old GLB to my old Motorola Motrac (U63HHT). Its an old
boatanchor. Trying
!
The offset crystal is:
F offset= (150 - Rcvr 1st IF)
/ 6 in Mhz
73 John VE3AMZ
- Original Message -
From: Dr. Ron Johnson
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 16, 2006 3:41 PM
Subject: [Repeater-Builder] GLB Synthesizer
Folks,
I wonder if anyone out
I dug up my manual to answer the original question,
but someone beat me to it. Several of the add-on pages
were original purple mimeograph, and they're slowly
fading.
Inside I had dates of 7/17/74, and a serial number
around 1400. I know I bought mine brand new and had
tons of trouble with
At 04:12 PM 2/16/2006 -0800, you wrote:
tons of trouble with synthesizer whine. Put it on a
Micor. Ended up feeding audio from the exciter back up
through the RX coax to do direct FM of the GLB's VCO.
That was the only way we could get rid of feedback and
distorted PL. As I recall, the unit
Any that I used worked great.
I had one on my Standard Horizon II 2-meter rig. It was the low profile
model with the offset switch. There were two of the regular (separate
TX/RX) on a two meter Mastr Pro and on a Prog Line at our EOC. A friend
had one of the GLB 2-meter radios and another a
11 matches
Mail list logo