Subject: Re: [Repeater-Builder] Motorola Radius P50
Dude,
Would you be interested in selling any of the radio's?
You have like seven radio's stacked on top of each other, would you be
willing to sell those?, and if you, how much per unit?
Bob Willis
At 10:46 AM 04/09/10, you wrote:
Sorry, bursting your bubble was truly not my intent. I suffer from
occasional CRS :-)
Seriously though lookin for a handheld with 4 channels to do 2
meters for a friend in a home. If you come across somethin(cheap,
cheap, real cheap) let me know. The state is
again! :-)
--- On Sat, 4/10/10, Mike Morris WA6ILQ wa6...@gmail.com wrote:
From: Mike Morris WA6ILQ wa6...@gmail.com
Subject: Re: [Repeater-Builder] Motorola Radius P50
To: Repeater-Builder@yahoogroups.com
Date: Saturday, April 10, 2010, 5:54 AM
At 10:46 AM 04/09/10, you wrote:
Sorry
On 4/8/2010 3:18 PM, La Rue Communications wrote:
Two questions on this unit.
1) Does anyone know the nomenclature for this? I have checked out
several different versions, including one that was built for
assignments dated after 3/10/02. I tried to check it out with it,
however, it doesnt
The P50's came in several models. Low power in the short housing, high power
in the tall. As was mentioned before, the battery voltage was different for
the two models. It was only capable of one or two channels max. Under the
battery was an adaptor board with the charging polarity protection
John,
The PL or DPL board could be added to the short or tall case, just
depended on if the radio had the connector strip in it. You can have
one or the other, required a board change to go from one to the other.
Tone set by dip switch.
Large battery = more power out. Short usually meant 1
Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: wd8chl
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 7:20 AM
Subject: Re: [Repeater-Builder] Motorola Radius P50
On 4/8/2010 3:18 PM, La Rue Communications wrote:
Two
: [Repeater-Builder] Motorola Radius P50
To: Repeater-Builder@yahoogroups.com
Date: Friday, April 9, 2010, 12:10 PM
Landfill - For sure! (If they're not working) These have the UHF frequency
still adhered to the battery panel, so I have very strong reason to beleive
these are UHF
: [Repeater-Builder] Motorola Radius P50
To: Repeater-Builder@yahoogroups.com
Date: Friday, April 9, 2010, 11:53 AM
John,
The PL or DPL board could be added to the short or tall case, just
depended on if the radio had the connector strip in it. You can have
one or the other, required a board
kevinvalent...@sbcglobal.net
Subject: Re: [Repeater-Builder] Motorola Radius P50
To: Repeater-Builder@yahoogroups.com
Date: Friday, April 9, 2010, 1:24 PM
Got a friend in a convalescent home, studying for his ticket now. That would be
perfect for him.
Let me know.
P50+ programming pins
Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: kevin valentino
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 10:34 AM
Subject: Re: [Repeater-Builder] Motorola Radius P50
Ops I was thinking SP50. Sorry you can keep
: [Repeater-Builder] Motorola Radius P50
Ops I was thinking SP50. Sorry you can keep that beauty! :-)
Anybody got an sp50 or gp300 VHF with at least 4 channel capability. Want to
get the guy on 2 meters. I have nothing in VHF.
Thanx
--- On Fri, 4/9/10, kevin valentino kevinvalentino
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: kevin valentino
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 10:46 AM
Subject: Re: [Repeater-Builder] Motorola Radius P50
Sorry, bursting your bubble was truly not my intent. I
be perfect for him.
Let me know.
P50+ programming pins on side if I remember correctly ?
--- On *Fri, 4/9/10, La Rue Communications /laruec...@gmail.com/* wrote:
From: La Rue Communications laruec...@gmail.com
Subject: Re: [Repeater-Builder] Motorola Radius P50
To: Repeater
Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: MCH
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 11:29 AM
Subject: Re: [Repeater-Builder] Motorola Radius P50
Yep - SP50 was on the side. P50
it?) :)
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: wd8chl
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 7:20 AM
Subject: Re: [Repeater-Builder] Motorola Radius P50
On 4/8/2010 3:18 PM, La Rue Communications wrote
But, how many people know that? I think his point was that it doesn't
seem to have been played with by someone who didn't know at least
somewhat what they were doing. I've seen some of those come in.
Joe M.
Bill Smith wrote:
Pry marks? Pop out the two clips in the battery compartment and
Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: MCH
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 12:11 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
But, how many people know that? I think his
How about the TXRX duplexers? UHF I assume..?
Lance N2HBA
- Original Message -
From: La Rue Communications
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 2:37 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
This is a photo of some
, 2010 1:30 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
How about the TXRX duplexers? UHF I assume..?
Lance N2HBA
- Original Message -
From: La Rue Communications
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 2:37 PM
Subject
-Builder] Motorola Radius P50
But, how many people know that? I think his point was that it doesn't
seem to have been played with by someone who didn't know at least
somewhat what they were doing. I've seen some of those come in.
Joe M.
Bill Smith wrote:
Pry marks? Pop out the two clips
If he was thinking 2 screwdrivers he was not thinking about the P50; the
Spirit perhaps but not the P50.
Milt
- Original Message -
From: MCH m...@nb.net
To: Repeater-Builder@yahoogroups.com
Sent: Friday, April 09, 2010 3:11 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
: [Repeater-Builder] Motorola Radius P50
But, how many people know that? I think his point was that it doesn't
seem to have been played with by someone who didn't know at least
somewhat what they were doing. I've seen some of those come in.
Joe M.
Bill Smith wrote:
Pry
From: La Rue Communications laruec...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Fri, April 9, 2010 1:48:37 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
Actually, those shouldnt be up there. I had to put them somewhere out of the
way as I
Communications laruec...@gmail.com
Subject: Re: [Repeater-Builder] Motorola Radius P50
To: Repeater-Builder@yahoogroups.com
Date: Friday, April 9, 2010, 7:37 PM
This is a photo of some of the goodies in a SMALL portion of my shop. It should
be large enough for most of you to really zoom
Two questions on this unit.
1) Does anyone know the nomenclature for this? I have checked out several
different versions, including one that was built for assignments dated after
3/10/02. I tried to check it out with it, however, it doesnt match up when it
came to the power level code. So I
2:18:10 PM
Subject: [Repeater-Builder] Motorola Radius P50
Two questions on this unit.
1) Does anyone know the nomenclature for this? I have checked out several
different versions, including one that was built for assignments dated after
3/10/02. I tried to check it out with it, however
Message -
From: Bill Smith
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 08, 2010 3:02 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
It's a 4-watt UHF carrier squelch radio. Uses crystals Short ones are 2-watt
units. PL or DPL boards fit under the plate
The dip switches are for programming the PL/DPL board only
From: La Rue Communications laruec...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Thu, April 8, 2010 5:10:00 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
Thanks Bill, am I
on this; threw those
things out MANY moons ago.)
If you lift the self adhesive board under battery it usually spells trouble if
not done with precision surgery.
--- On Thu, 4/8/10, Bill Smith brsc...@yahoo.com wrote:
From: Bill Smith brsc...@yahoo.com
Subject: Re: [Repeater-Builder] Motorola Radius P50
can I find
you Gurus on? :)
John Hymes
La Rue Communications
10 S. Aurora Street
Stockton, CA 95202
- Original Message -
From: kevin valentino
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, April 08, 2010 3:27 PM
Subject: Re: [Repeater-Builder] Motorola Radius P50
Barry et al:
the HTN9026 rapid charger for p50 and other types uses the 2505735S09 18vdc 300 ma wallwart
the HTN9046 charger normal rate uses a 2505735S08 16 vdc 100 ma wall wart
either of these wallwart power supplies are available from our stock for $2.00 ea + shipping
MDM Radi0
Hello Group,
Does anyone know what type of AC adapter is used with
the rapid charging dock or the standard charger dock
used to charge the Radius P50 HT?
I have both charging docks and can't find the AC
transformer for either...:(
Regards, Barry
33 matches
Mail list logo
