I understand...
If all else fails you can still buy a replacement high-split
tld2601a pa from Richard at Bro Comm. I spoke with him on the
phone about two weeks past and he had only the high range/split
pa's in remaining stock.
The power control voltage wire from the PA is no rocket
Thanks Skipp,
It is designed for low input power (400-500MW). The component
layout is not similar to the ones in the UHF or VHF-HI Manuals. I
hope to use it in place of a TLD2601A Continuous Duty AMP in an
MSR2000 and I want to get it dialed in just right.
I've been talking to a guy at TPL
Bill I think I have this-away until April., contact me then if still
required ?
Jerry VE3 EXT
-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED]
Sent: Saturday, March 01, 2008 4:36 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: TPL Manual
Bill I think I have this-away until April., contact me then if still
required
You should be able to work with a combination of the two manuals
found on the sonic web page... http://www.radiowrench.com
The UHF Repeater Manual has a lot of the RXR Information and the
vhf mobile manual has a lot of the proper rf for your unit. There
are variants such as your SP (special
Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of skipp025
Sent: Saturday, March 01, 2008 8:29 AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: TPL Manual
You should be able to work with a combination of the two manuals
found
6 matches
Mail list logo
