RE: [Repeater-Builder] Help with GE TMX-1000

2006-05-12 Thread Eric Vincent
-Builder] Help with GE TMX-1000 Eric Vincent wrote: I use these radios for UHF link and I like to remote control my Echolink station via the net. I was made many tests to pass DTMF but I think the RX CG don?t like DTMF and cut all the time, on and off and on and off... Either the DTMF you're

RE: [Repeater-Builder] Help with GE TMX-1000

2006-05-12 Thread Eric Vincent
@yahoogroups.com [mailto:[EMAIL PROTECTED] De la part de Tedd Doda Envoyé : 11 mai, 2006 09:15 À : Repeater-Builder@yahoogroups.com Objet : RE: [Repeater-Builder] Help with GE TMX-1000 Eric: On Wed, 10 May 2006 20:14:15 -0400, Eric Vincent wrote: For the CG, it is the same as Phoenix? Can put carrier

RE: [Repeater-Builder] Help with GE TMX-1000

2006-05-12 Thread Tedd Doda
On Thu, 11 May 2006 20:25:17 -0400, Eric Vincent wrote: I tried to put a gnd on CG Disable on J910 and work like a Phoenix! Great! For manual and programming, I know what you think about that... Ya...sorry about that. You still may want to look around for a Phoenix-SX manual, as that will give

RE: [Repeater-Builder] Help with GE TMX-1000

2006-05-11 Thread Tedd Doda
Eric: On Wed, 10 May 2006 20:14:15 -0400, Eric Vincent wrote: For the CG, it is the same as Phoenix? Can put carrier squelch via J910? As far as I know, yes, that should work, but I've never tried it. For programming, I have the GE Min.E2 4EX22A10 and work well with X2210 into Phoenix but

Re: [Repeater-Builder] Help with GE TMX-1000

2006-05-11 Thread Jim B.
Eric Vincent wrote: I use these radios for UHF link and I like to remote control my Echolink station via the net. I was made many tests to pass DTMF but I think the RX CG don?t like DTMF and cut all the time, on and off and on and off... Either the DTMF you're sending is bad-likely too hot

Re: [Repeater-Builder] Help with GE TMX-1000

2006-05-10 Thread Tedd Doda
On Wed, 10 May 2006 11:20:49 -0400, Eric Vincent wrote: Hello, I have many GE TMX-1000 UHF in my stock and I dont have sevrice manual. The TMX-1000 (MRK-V) is basically the same as a UHF Phoenix, and you can use that manual for the RF stuff. Any body can tell me if can I put the RX CG at off.

RE: [Repeater-Builder] Help with GE TMX-1000

2006-05-10 Thread Eric Vincent
Thank's for reply, For the CG, it is the same as Phoenix? Can put carrier squelch via J910? I need to remove CG decode via my repeat controller NHRC-4 and the monitor button is not a good solution... For programming, I have the GE Min.E2 4EX22A10 and work well with X2210 into Phoenix but into