Re: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread Charles Schmell
Skipp - Looking at the cabling - TX side is normal; but the receive side looks to be wired as 2 - 3 can duplexers in parallel. How does this improve rejection? Seems that IF you needed the parallel duplexers to handle a LOT of tx power, that would be okay, but does it help on the receive side?

Re: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread Chuck Kelsey
And they only approached 100 dB... Chuck WB2EDV - Original Message - From: skipp025 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, May 28, 2007 3:02 AM Subject: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due... Re: When 4, 6 or 8 Cavities just

Re: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread Bob M.
It would seem like the middle and right columns were originally a simple duplexer, then they added the left column to that. If you can trust the labeling, the bottom left is the TX input and the top right is the RX input. The middle and left columns have shorted loop stubs attached to each

Re: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread Milt
range. If nothing else it should be a good source of notch cans. Milt N3LTQ - Original Message - From: skipp025 [EMAIL PROTECTED] To: Repeater-Builder@yahoogroups.com Sent: Monday, May 28, 2007 3:02 AM Subject: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due... Re: When 4, 6

Re: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread k1ike_mail
I too was trying to figure out the harness. I've never seen something like this before. I also saw only 3 cans in the transmit side. This must be a low power duplexer, as these appear to be only a notch devices and there are only 3 cans to notch out the transmitter noise from getting into

RE: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread Jeff DePolo
: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Bob M. Sent: Monday, May 28, 2007 8:04 AM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due... It would seem like the middle and right columns were originally

RE: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread Daron J. Wilson
* Re: When 4, 6 or 8 Cavities just won't due... Another Ebay gem: DB PRODUCTS 9-CAVITY RADIO REPEATER DUPLEXER-100DB-HAM Ebay Item number: 250120910164 I don't know to be impressed or just laugh at all the hardware (number of cavities used). cheers, skipp * The

RE: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due...

2007-05-28 Thread Gary Schafer
@yahoogroups.com Subject: [Repeater-Builder] When 4, 6 or 8 Cavities just won't due... Re: When 4, 6 or 8 Cavities just won't due... Another Ebay gem: DB PRODUCTS 9-CAVITY RADIO REPEATER DUPLEXER-100DB-HAM Ebay Item number: 250120910164 I don't know to be impressed or just laugh at all