Barnett Rd
Boswell, PA 15531
- Original Message -
From: Mark n9...@ameritech.net
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 13, 2009 11:26 AM
Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A
Scott,
I have six of the MICOR Four User Control Module
wd8chl wrote:
Isn't that card a PL decoder card from a CR?
I have a TLN4050SP19 from an EMS station that I made a few jumper
changes to make it into the dual-squelch level thingy, controlling it
with tones from the 7330. Hit a macro, squelch gets tight. Hit another,
it goes to threshold.
PM
Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A
The typical application is to be able to drop RX PL from the console. Not
just to check for co-channel users (ie the monitor function which is reset
by PTT) but to go to and stay in carrier squelch even when transmitting
8:03 AM
Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A
Milt;
I believe it was to change operation from PL operation to CS operation, not
just receive, but 'repeat' also
IOW, change it to a carrier-in operated repeater
Gary
- Original Message -
From
N3LTQ
- Original Message -
From: Scott Zimmerman n3...@repeater-builder.com
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 13, 2009 11:00 PM
Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A
Eric,
I'm not sure. I found (1) in my stash that I have collected
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, March 14, 2009 12:21 PM
Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A
Correct. This is the application we are planning on using it for.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Rd
Boswell, PA 15531
Scott,
I have six of the MICOR Four User Control Module - TLN1685A.
Might these work for your application? Each reed has an Enable/Disable
switch on the front of the card...
Mark - N9WYS
-Original Message-
From: Repeater-Builder@yahoogroups.com On Behalf Of Scott Zimmerman
I am in
Boswell, PA 15531
- Original Message -
From: Mark n9...@ameritech.net
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 13, 2009 11:26 AM
Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A
Scott,
I have six of the MICOR Four User Control Module - TLN1685A.
Might
n9...@ameritech.net
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 13, 2009 11:26 AM
Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A
Scott,
I have six of the MICOR Four User Control Module - TLN1685A.
Might these work for your application? Each reed has an Enable
Scott,
What type of Micor station would use this card?
73, Eric Lemmon WB6FLY
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Scott Zimmerman
Sent: Friday, March 13, 2009 8:18 AM
To: motorola-u...@yahoogroups.com;
Barnett Rd
Boswell, PA 15531
- Original Message -
From: Eric Lemmon wb6...@verizon.net
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 13, 2009 9:40 PM
Subject: RE: [Repeater-Builder] Micor Card needed - TLN1251A
Scott,
What type of Micor station would use this card?
73, Eric
Zimmerman n3...@repeater-builder.com
To: Repeater-Builder@yahoogroups.com
Sent: Friday, March 13, 2009 11:00 PM
Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A
Eric,
I'm not sure. I found (1) in my stash that I have collected at hamfests
and
whatnot over the years. I have no idea
...@yahoogroups.com] On Behalf Of Milt
Sent: Friday, March 13, 2009 9:17 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Micor Card needed - TLN1251A
The typical application is to be able to drop RX PL from the console. Not
just to check for co-channel users (ie the monitor
13 matches
Mail list logo
