I don't know if this was suggested, but you can buy a cap of larger
value that physically fits the area and then remove a plate/stator or
two to get the proper value.
Removing a plate and/or stator is a trick from way back in ham time when
people scrounged parts and made them work.
73, Joe,
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
built by Bomar crystal at a cost of $35 each plus shipping and are temp
compensated. Send me $40 and and I will send them to you.
Also for Micor, I have a KXN1052A on
I'll take the Micor elements. PM sent to Terry (hope it didn't get
caught in a spam filter...)
On 04/17/2010 02:58 PM, terry_wx3m wrote:
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were
custon built by Bomar crystal at a cost
I'm looking for schematics for a 19B234871 Tone/Remote / Repeater Control Panel
for a Mastr II Base station. The one Repeater Builder:
http://www.repeater-builder.com/ge/lbi-library/lbi-31853e.pdf seems to be newer
then the one I have. Also I have no idea where to look to see what Rev. it is.
--- In Repeater-Builder@yahoogroups.com, terry_wx3m wx3m.te...@... wrote:
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
built by Bomar crystal at a cost of $35 each plus shipping and are temp
compensated. Send
GE are sold to Bill
Moto are sold to Tony
Pending paypal
Thanks
--- In Repeater-Builder@yahoogroups.com, terry_wx3m wx3m.te...@... wrote:
I recently took 2 UHF machines off the air.
I have for a Mastr II 1 5C on 442.050 and 1 EC on 447.050. These were custon
built by Bomar crystal at a
Hello to the Group,
I've got someone from Romania Emailing me regarding the
Motorola Rick and it's setup. I thought there might be a
bit of information (IE a Manual) for it on the RB Pages
but I'm not able to find any.
Besides the Batlabs site, is/does anyone have a web page
up for the
Skipp,
The manual for the HLNB R*I*C*K is 6880901Z79, still available from
Motorola Parts for about $5. Since it is still in print and is copyrighted,
it should not be posted anywhere for download, lest the long arm of the law
be felt by the perpetrators. I suggested to the individual that
Joe k1ike_m...@... wrote:
I don't know if this was suggested, but you can buy a
cap of larger value that physically fits the area and
then remove a plate/stator or two to get the proper value.
Removing a plate and/or stator is a trick from way back
in ham time when people scrounged
Sorry Skipp, never got that request, sometimes I think
not all the emails to this group end up getting forwarded to
me. If you've followed the thread you know I did order one
that is not quite exact but should work. Thanks again
everyone for your help.
Gary - K7NEY
On 4/17/2010 5:52 PM,
OK, It just may be because it's late on a Saturday night, but I am stumped.
I have a UHF 100W secure capable MSF5000 that when I key the TX (doesn't
matter how of the GOZILLION ways) the 'PA On', 'PA Key' and 'PA Full'
LED's light for a split second and then I get no power out. I am testing
Gary Hoff k7ney...@... wrote:
Sorry Skipp, never got that request, sometimes I think
not all the emails to this group end up getting forwarded to
me. If you've followed the thread you know I did order one
that is not quite exact but should work. Thanks again
everyone for your help.
Gary
Buna Ziua Eric,
I'll relay that information back to Daniel in Romania.
Multumesc
La revedere
skipp
Eric Lemmon wb6...@... wrote:
Skipp,
The manual for the HLNB R*I*C*K is 6880901Z79, still available from
Motorola Parts for about $5. Since it is still in print and is
I probably could, but I never know what to charge for stuff like that.
Mel - WA6JBD
Mel - Looks like you could have a
side job re-working these things for hams.
Chuck
WB2EDV
14 matches
Mail list logo
