I have done when use an external controller, completely disconnect the big
board and wire it direct to
RX/TX assemblies, if you got the manuals is easier.
Juan
_
De: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] En nombre de Dave
Enviado el: Lunes, 08 de Septiembre
On Fri, 12 Sep 2008, joeboogie1 wrote:
Hi I live in Central New Jersey and I'm getting a Motorola GTX
programed. I understand the band plans are different in every state.
Beside 927.500 what other direct frequencies are available for FM? Are
there any 900Mhz repeaters in New Jersey Near
On Thu, 11 Sep 2008, Dan wrote:
I have in my possesion a true 900Mhz Mastr II repeater. I was so
surprized to find it I didnt look around for any manuals.
Does ANYONE have information on this rare bird??? It has what looks to
be a IDA controller and some kind of secondary board mounted on
It could also be riding on the Governments Pave Paws, SADL, EPLS, and
other digital signals they transmit regularly. There are numerous areas
in the US where these signals are just transmitted in the Amateur Radio
Spectrum (440 is the worse) and they mix with other sigs with
unpredictable
I believe they made an antenna called the Storm Chief. However, others, like
Sinclair, made fiberglass antennas as well, so it could be theirs. Station
Master is sort of like saying Kleenex. It became the generic name for all of
them. Figure around 6 dB. And I'm assuming UHF, but you didn't
On Thu, 11 Sep 2008, Tim Porter wrote:
i have a motolora x9000 vhf radio is there anyone out that knows where
to pick the audio off from to connect to a irlp board.
According to my UHF X9000 manual, detector audio is available at P/O
J601, Pin 3.
If you want the audio shaped or flat, it gets
Yes, I have used several of them, and have the factory tuning sheets for both
10 and 6 meters, i will dig them out and get back to you ASAP..
lance N2HBA
- Original Message -
From: Harry Miller
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, September 09, 2008 1:45 PM
Kevin,
Way to go!!
JohnT
P.S. You might have added that since you are not a teacher, you don't
have to deal with the parents and don't have to pamper the little
darlings.
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Custer
Kevin's list = Kevin's rules.
I can't see any problem with that.
(Sorry. I'm probably feeding the trolls.)
Mike
WM4B
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of John Transue
Sent: Saturday, September 13, 2008 9:44 AM
To:
Dan;
I can be of some assistance... I am not
aware of anything actually called a 900 mastr II
it was called a GE Net 900 station and was a
business format similar to edacs... There were
900 mhz stations called Mastr Prism as well...but
sounds like you have the former.
It requires an
Gene on AR902 did some of those, he should be able to help.
Actually Gene W7UVH did a conversion of 800 Mastr II's to 900...
The 900 station is equivalent to a late Mastr II Edacs station...
just before MIIe...
They are synthesized already with a synthesizer similar to the
late 800 GMarc V trunking stationsbut controlled by a GETC shelf,
I sent this question recently and saw no responses - so I'll try again ...
I have a DB 268 antenna - a 4-bay VHF dipole.
It has the harness interior to the mast.
I want to know if it is possible to replace that harness with an
exterior one - like the DB 224 has.
If so - any ideas on the
Hello Larry - I reckon you didn't
get any answers because maybe
every one like myself didn't know
the answer - I have oft wondered
about this myself - I have had a
DB-224 for years- bought it new and
have had problems off and on for
years with it - I have wondered if you
drilled thru
Looking for an inexpensive controller. This is just the package for you.
Intergrated Control System, Basic Controller. Not a kit, purchased in
May 2006.
Nice aluminum box with cutouts, cable and full manual. $50.00 firm and
I'll ship to lower 48.
Jim- WA9FPT
[EMAIL PROTECTED]
hi all
i have 3 little duplexers
sinclair sd-220
rx 152.660
tx 157.950
if someone is interested send me an email direct please
73/s
make me an offer will see,i dont need them as their GE radio connected
too.
gervais ve2ckn
Hi All,
I wanted to see if anybody was interested in a Tektronics 492 Spectrum
analyzer with all the options. If nobody is interested I am going to sell on
eBay.
Mike K7PFJ
Hi All,
There was a discussion on Repeater-Builder a while ago about the advantages
and disadvantages of various commercial CTCSS highpass filters.
S-COM's analog guru, Virgil, W0INK, did a careful analysis of five common
highpass filter designs: Comm Spec TS-32, Comm Spec TS-64, Micor
Thanks to all, the controller is gone.
Jim- WA9FPT
Coy -
Since that was a message I sent, I'll explain it - in private e-mail.
-- Original Message --
Received: Thu, 11 Sep 2008 05:15:38 PM PDT
From: Coy Hilton [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] what does this email mean?
I received the
20 matches
Mail list logo