I have a Motorola Maxar, plate number D31TRA2300AK
I scanned through the Repeater builder site and didn't find many hits on
the model.
I want to put this on 6M - any experience on how difficult it would be
to insert a 6M crystal set/realign?
Any thoughts or referrals would be most appreciated
Dennis,
You may have to mess with the front end filter assy but should be able to
tune up there as long as the radio is a high split radio model.
Mike
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Dennis Ashworth
Sent:
Thanks to all that replied. Yes it does need to be a modified file by Kenwood
and sent to me. This is a great group. Really appreciate your help!
Best Regards,
Alan
- Original Message -
From: NORM KNAPP
To: Repeater-Builder@yahoogroups.com
Sent: Wednesday, January 28, 2009
Hi All.
I am working on several Micor repeaters for use in Montana linking
back to Tucson via the inter-net.
These are standard 75 watt complete Micor stations.
My problem is with the built in circulator that is feed by the PA
prior to the duplexer.
I have tuned the circulator using both
If it were me, I'd suspect the LPF. Sweep it.
Chuck
WB2EDV
- Original Message -
From: Ralph S. Turk
To: Repeater-Builder
Cc: David Turk
Sent: Thursday, January 29, 2009 11:36 AM
Subject: [Repeater-Builder] Micor Repeater
Hi All.
I am working on several Micor repeaters for use in
After all that have you sent the FCC a complaint about him ? They should step
in and help you.
--- On Wed, 1/28/09, Mike Besemer (WM4B) mwbese...@cox.net wrote:
From: Mike Besemer (WM4B) mwbese...@cox.net
Subject: RE: [Repeater-Builder] Re: 2 meter noise help!
To:
I have some Toko front end filters that, with a little ingenuity, could
be used in various radios for 902 MHz ham band conversions. They're the
4DFA-915E-10 2 pole surface mount version of the filters we've been
using in the Maxtracs (which are 3 pole through hole devices). Here's a
link to
We're working that now. putting that last tidbits of info together for the
Field Office in Atlanta and for the main office in DC. Maybe Riley's
replacement will be chomping at the bit looking for something to do!
73,
Mike
WM4B
From: Repeater-Builder@yahoogroups.com
Danny,
There is some quoted text from ICM in blue, and pictures, showing
which channel elements that ICM will re-crystal here:
http://aa9nv.r2i.net/equipment.htm
Go to the Johnson repeater section.
I sent you my correspondence from ICM direct.
Last quote I had was $115.45 each element or
Hello All,
Thanks for all of you that replied to my original email.
I already know what I need, and what I need to do. Thanks.
However nobody addressed the subject of WANTED.
So, here it is again
WANTED... In Need of to install
I am a looking for a preamp to go on the WR6ABD 2 meter
Call Chip at AngleLinear and be done with it. You'll never regret it
Ken
At 05:32 PM 1/29/2009, Scott Avery wrote:
Hello All,
Thanks for all of you that replied to my original email.
I already know what I need, and what I need to do. Thanks.
However nobody addressed the subject of WANTED.
If I remember right, Motorola's spec is 92 watts out of the amplifier should
yield 75 watts out the back of the station. That translates into 0.9 dB
loss through the antenna network (isolator, LPF, etc.). Sounds like your 1
dB is about right...it may be a tenth or two higher since it's being
Dennis,
The Maxar is a low-end, economy radio that may be difficult to convert to
6m. I tried to convert some VHF high-band Maxars to 2m, and found their
performance to be disappointing- even after doing all of the capacitor
changes. I must assume that the low-band models may be equally
Scott,
Would you be interested in a brand new unopened ARR P150VDG preamp? Unscrew the
cover to tune it to
your freq and you're all set. This GaAsFET preamp has the lowest noise factor
in ARR's line. They're
$120 new but I'd let this spare one go for $80 including shipping. Reply to me
direct
Busco en manual del equipo BLITZ CL-150
I look in manual of the team BLITZ CL-150
Enrique Esteban POINSOT
LU6VID
Grid Locator FE89ME
40º 49' 16 S 62º 59' 24 W
Guemes 831 - Viedma
Río Negro
Patagonia Argentina
Since Riley retired last summer, there has not been one single amateur radio
enforcement action by the FCC
Draw your own conclusions...
- Original Message -
From: Ralph Mowery ku...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, January 29, 2009 5:15 PM
Subject:
I have a Motorola Maxar, plate number D31TRA2300AK
I scanned through the Repeater builder site and didn't
find many hits on the model.
I want to put this on 6M - any experience on how difficult
it would be to insert a 6M crystal set/realign?
Any thoughts or referrals would be most
Forwarded from a friend
There is a new sheriff in town. The FCC has appointed Laura Smith to
take Riley Hollingsworth's former position in enforcement.
The FCC's Special Counsel for Amateur Radio slot has gone unfilled
for 6 months thus she has a backlog of work ahead of her.
Tnx Eric - that may be good advice. I did find manuals ...not at $58,
but still plenty expensive ... and I'd still need a crystal ($25-30). I
want to replace a 6M beacon so RX not an issue ... but will need to mod
for CW. This mod (in my limited experience) usually means getting into
things
1,000 foot AM tower?
--- On Wed, 1/28/09, Jeff DePolo j...@broadsci.com wrote:
From: Jeff DePolo j...@broadsci.com
Subject: RE: [Repeater-Builder] Iso-coupler
To: Repeater-Builder@yahoogroups.com
Date: Wednesday, January 28, 2009, 6:11 PM
Got and opportunity to locate a repeater on a nice
How about a GE delta low band. There programmable with 128 channels w/990
control head. 90- 100 watts and they tune fairly easy, no modifications.
Dean.
--- On Thu, 1/29/09, skipp025 skipp...@yahoo.com wrote:
From: skipp025 skipp...@yahoo.com
Subject: [Repeater-Builder] Re: Motorola Maxar
Denny,
I would stay away for those Maxar's. They were never a very good
radio, but they were a lot cheaper than buying a Maxtrac or Mitrek at
the time they came out.
I would stick with trying to find a 42-50 MHz Maxtrac or other
synthesized radio.
If you really want something in a crystal
Hi Skip
I work for a Kenwood shop. I have installed dozens of TK-6110's. I tried to get
one to program into 6m, but the software wouldn't let me. How do you do it?
73 de N5NPO
- Original Message -
From: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
To:
23 matches
Mail list logo
