Did you use and Filters that helped isolate the tow transmitters?
de KM3W and WPWN390
--- On Mon, 8/31/09, skipp025 skipp...@yahoo.com wrote:
From: skipp025 skipp...@yahoo.com
Subject: [Repeater-Builder] adjacent repeaters linked
To: Repeater-Builder@yahoogroups.com
Date: Monday, August 31,
Well then, a 444 MHZ repeater controlling a 10 meter remote base would be
perfectly legal then!!!
DE KM3W
--- On Fri, 9/4/09, mwbese...@cox.net mwbese...@cox.net wrote:
From: mwbese...@cox.net mwbese...@cox.net
Subject: RE: [Repeater-Builder] HF Remote Bases - Illegal?
To:
You got -100 db on those cans? WoW!!!
--- On Sat, 9/26/09, NORM KNAPP nkn...@twowayradio.net wrote:
From: NORM KNAPP nkn...@twowayradio.net
Subject: [Repeater-Builder] TX/RX systems duplexers. WOW!!!
To: Repeater-Builder@yahoogroups.com
Date: Saturday, September 26, 2009, 11:51 PM
using pure discriminator audio perhaps?
--- On Mon, 10/19/09, Michael Ryan mryan...@tampabay.rr.com wrote:
From: Michael Ryan mryan...@tampabay.rr.com
Subject: RE: [Repeater-Builder] kendecom repeaters on 220
To: Repeater-Builder@yahoogroups.com
Date: Monday, October 19, 2009, 1:06 AM
AI just bought several pre-made connectors from Advanced Receiver
Research...but I'm sure you can buy the raw cable and make up your own, as
well.
de KM3W
--- On Sun, 10/25/09, kc8fwd kc8...@hotmail.com wrote:
From: kc8fwd kc8...@hotmail.com
Subject: [Repeater-Builder] Double Shielded Cable
Make sure you Full PL BOTH tx and rxers. I have had great luck with this
method. At least with the Motorolas I use as soon as the input signal is
dropped, the no squelch tall...and therefore no constant keying.
de KM3W
--- On Tue, 11/10/09, Nate Duehr n...@natetech.com wrote:
From: Nate Duehr
So what is the recommendation to set the loss of the BP cavity? I have a
setting as to 3 db, 1 Db, .5 Db Etc. Running the ARR preamp on a UHF repeater,
it seems the preamp is a little too much and we get a little desense. I am only
running a 4 cavity duplexer and a notch cavity with the preamp.
] On Behalf Of Pointman
Sent: Thursday, November 26, 2009 10:09 AM
To: Repeater-Builder@ yahoogroups. com
Subject: Re: [Repeater-Builder] Re: pre-amp placement
So what is the recommendation to set the loss of the BP cavity? I have a
setting as to 3 dB, 1 dB, .5 dB etc. Running the ARR preamp on a UHF
I have an ACC RC-85 V5.1 controller on my UHF machine. I was wondering if
anyone has ever programmed the chip in it for different courtesy tones,
etc.I know this was done back in the 2000 or so area by a few guys in the
Philly area, but can anyone tell me how it was done or who did it?
at my house in a small city, and is strictly UHF with he 220 link still on,
but all of the remote gear is still in the cabinet, but not in use.
Pointman
From: peme...@comcast.net peme...@comcast.net
To: Repeater-Builder@yahoogroups.com
Sent: Sun, December 27
Hi Bob, I wish you luck in finding a site. I had one for 15+ years, when the
owner of the building sold the use of the roof to a cell phone company for big
bucks. I am in the same boat, but since I have found that most sites and their
access are political.
de KM3W Paul
Where are you located?
From: The Rices sri...@cfl.rr.com
To: Repeater-Builder@yahoogroups.com
Sent: Sun, January 17, 2010 7:15:24 PM
Subject: Re: [Repeater-Builder] MSF 5000 Repeater for sale
Please note: Those individuals that are asking me if I will ship
I have several Maggiore COR boards...but of course the one that runs the main
repeater is downand Maggiore doesn't make them anymore.
From: Joe k1ike_m...@snet.net
To: Repeater-Builder@yahoogroups.com
Sent: Mon, February 1, 2010 4:12:22 PM
Subject: Re:
Let me get this right...you are txing on channel 31 and rxing on Channel 1 in
the CB band? You are not in the US I assume.
From: i recycle computers kc8...@hotmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Fri, February 12, 2010 1:21:11 PM
Subject: Re:
This repeaters amp runs on alcohol? Green!!! LOL
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Sat, February 13, 2010 1:16:54 PM
Subject: [Repeater-Builder] Re: 11m Repeater family tradition...
I would not to see one that was
wow...my glassesI must need new ones...I didnt even see that!! I saw .965
and didn't think to look at the rest of the freq! Sorry!
From: MCH m...@nb.net
To: Repeater-Builder@yahoogroups.com
Sent: Sat, February 13, 2010 12:42:08 PM
Subject: Re:
Hey Rev, you got teeth... right?
From: Ken Arck ah...@ah6le.net
To: Repeater-Builder@yahoogroups.com
Sent: Sat, February 13, 2010 12:29:00 PM
Subject: Re: [Repeater-Builder] Re: 11m Repeater
At 09:23 AM 2/13/2010, i recycle computers wrote:
I would not to
Do you feel it was worth the money? In Other Words...did it do everything you
expected it to do?
de KM3W
From: burkleoj joeburk...@hotmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Fri, June 25, 2010 1:23:15 AM
Subject: [Repeater-Builder] Re: Doug Hall
i agree...I have at least 6 of them on UHFeither on the ham bands or
business radio...they still work great!
de KM3W
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Sent: Tue, July 13, 2010 4:52:38 PM
Subject: [Repeater-Builder] Re:
Perhaps a lesson from Confucius would be in order as well, later paraphrased by
Jesus..Do NOT do unto others that which you would NOT like done to you. I
think the Pastor might get the connection. Hmmm I hope.
Paul / KM3W
From: Joe
Boy, I must be old...I actually remember those radios.
de KM3W
From: La Rue Communications laruec...@gmail.com
To: Repeater-Builder@yahoogroups.com
Sent: Tue, July 27, 2010 12:07:58 PM
Subject: Re: [Repeater-Builder] showing our age (old HT's)
I have a
Like most of the commercial stuff of that era, the unit was locked into a
car or truck instead of bolted in. It made for an easier repair to just unlock
it rather than unbolting everything. It sat in a cradle with the locking
mechanism that WAS bolted to the car body. GE and RCA also had
: what is purpose of lock on
Mitrek?
GE = BF10A
RCA = CH751
Joe M.
Pointman wrote:
Like most of the commercial stuff of that era, the unit was locked
into a car or truck instead of bolted in. It made for an easier repair
to just unlock it rather than unbolting everything. It sat
23 matches
Mail list logo