Try writing a default file to the repeater. Test then program your data. Make
sure it is the correct one for the band. If you by accident write a vhf file to
a uhf model you will have a door stop and will have to go back to
Vertex.
Sent from my Verizon Wireless BlackBerry
-Original
You have to set your zone first to establish how many channels are in the zone
then you can program frrqs for each zone.
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Ralph S. Turk w7...@comcast.net
Date: Sat, 30 May 2009 15:11:05
To:
That software is not designed for end users. It really is dealer software so it
is not very intuitive. Try f1 for help.
Good luck,
Alan
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Ralph S. Turk w7...@comcast.net
Date: Sat, 30 May 2009 15:11:05
To:
Yes but if the code plug versions are different it may not work. You may have
to read and rewrite if that is the case. The clone icon if I remember is on the
top pf the software window. These are not simple to program.
There is no software manual except F1 key. Mot. Assumes this is used by an
Its called add conventional personalities to zone. If you are in conventional
mode. If operating LTR then you would set a zone for LTR and within you would
set those parameters for that particular system.
Alan
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Ralph S.
20ft. Vertical separation assuming vertically polarized omni antennas are used.
Alan
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Aisen Lopez aisendwi...@yahoo.com
Date: Sun, 31 May 2009 18:16:14
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder]
Mototurbo cannot operate in mixed mode analog and digital simultaneously NXDN
can. Mototurbo does not use open standard technology and limits your choice to
Only Motorola. NXDN is Kenwood and ICOM and soon others. Mototurbo does not
offer 2 Tone paging NXDN does. Mototurbos use of two voice
If you reduce the power enough even a Ritron repeater can be 100 percent duty
cycle. This means nothing.
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: rahwayflynn mafl...@att.net
Date: Sun, 05 Jul 2009 00:34:05
To: Repeater-Builder@yahoogroups.com
Subject:
Personally I think the CP200 Is not a very good radio. The HT750 is decent but
the battery design stinks as the release tabs frequently seize and make it so
you have to pry the battery off ruining it. There are also the code plug
problems on both that make the radio a doorstop until sent back
Adam that was funny! Thanks for that.
Have fun,
Alan
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Adam techiea...@yahoo.com
Date: Tue, 28 Jul 2009 11:48:38
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Closed Repeaters
From:
Hi guys,
I have a Schlumberger Wavetek 4015 Service Monitor for sale. The unit works
fine and is not beat up. It is a Stabilock. I have the manual as well. Any
interest you can email me off the group @ wa...@earthlink.net.
This is a 1995 or 96 Model with LCD screen.
Thanks!
ALAN
Sent from my
Anyone have a spare bandpass filter tunable for the UHF amateur band like a DCI?
Thanks!
Alan
- Original Message -
From: Mike Dietrich
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, November 26, 2009 10:09 AM
Subject: Re: [Repeater-Builder] Re: pre-amp placement
Most people gas after their fed.
Alan
- Original Message -
From: W3ML
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, November 26, 2009 11:37 AM
Subject: [Repeater-Builder] RE: preamp
I just read back what I typed while XYL was talking to me. You could tell I
%40earthlink.net.
Thanks,
Alan WA2AR
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.426 / Virus Database: 270.14.86/2533 - Release Date: 11/28/09
19:34:00
14 matches
Mail list logo
